BEETECH B-M2 Moisture Meter User Manual

giriiş

The BEETECH B-M2 Moisture Meter is a professional instrument designed for accurately checking moisture content in various materials. It is suitable for wood, timber, paper, cardboard, and hardened building materials such as plaster, concrete, and mortar. This device operates on the principle of electrical impedance and utilizes advanced single-chip micro-computer technology to provide precise measurements by integrating characteristics of different materials for accurate calculation. It offers a non-destructive measuring method, ensuring the integrity of the measured object. The B-M2 features both an analog bar display and a digital display for clear readings, and its electrode pins are replaceable. This manual provides essential information for the proper setup, operation, and maintenance of your BEETECH B-M2 Moisture Meter.

Kutuda Neler Var?

Upon unpacking your BEETECH B-M2 Moisture Meter, please ensure all the following components are present:

• BEETECH B-M2 Moisture Meter
• Koruyucu Kese
• Kullanım Kılavuzu (bu belge)
• Pil (9V)

Image: Contents of the BEETECH B-M2 Moisture Meter package, including the meter, manual, and battery.

Ürün Özellikleri

• Replaceable Electrodes: The meter features replaceable electrode pins (10mm length). Note: Electrodes are not included and must be purchased separately when replacement is needed.
• Çift Ekran: Simultaneous analog bar display and digital display for clear and comprehensive readings.
• Malzeme Seçimi: Selectable measurement modes for Wood and other building materials.
• Gelişmiş Fonksiyonlar: Includes Maximum (MAX) and Minimum (MIN) reading retention, Auto Power Off, and an LCD display with backlight for visibility in various lighting conditions.
• Sıcaklık ölçümü: Simultaneous measurement of moisture and ambient temperature.

Kurmak

Pil Kurulumu

1. Locate the battery compartment cover on the back of the BEETECH B-M2 Moisture Meter.
2. Pil bölmesi kapağını açmak için aşağı doğru kaydırın.

Image: Hands opening the battery compartment cover on the back of the meter.
3. Connect the included 9V battery to the battery connector inside the compartment, ensuring correct polarity.


Image: Hands connecting and inserting a 9V battery into the meter's battery compartment.

4. Carefully place the battery into the compartment and slide the cover back into place until it clicks securely.

Kullanım Talimatları

Cihaz Bittiview

Resim: Ön view of the BEETECH B-M2 Moisture Meter, showing the LCD screen displaying moisture percentage and temperature, along with power, backlight, mode, and MAX/MIN buttons.

Açma/Kapatma

• Basın Güç düğmesi (U-shaped arrow icon) to turn the meter on.
• Pil ömrünü korumak için, ölçüm cihazı belirli bir süre kullanılmadığında otomatik olarak kapanacaktır.

Selecting Material Mode

• Basın MOD düğmesi to cycle through the available material types: Wood and Building Materials.
• The selected mode will be indicated on the LCD display. Ensure the correct mode is chosen for accurate measurements.

Ölçüm Alma

1. After selecting the appropriate material mode, firmly press the electrode pins into the material you wish to measure. Ensure good contact.
2. The moisture content will be displayed digitally as a percentage (%) and also indicated on the analog bar graph.
3. The ambient temperature will also be displayed simultaneously.

Image: A hand holding the BEETECH B-M2 Moisture Meter, showing a moisture reading of 15.4% on the LCD display.

Using MAX/MIN Function

• Basın MAKS/MIN düğmesi ile view the maximum or minimum moisture reading recorded during a measurement session.
• Press again to cycle between MAX, MIN, and current reading.

Arka Işık Kontrolü

• Basın Arka aydınlatma düğmesi (light bulb icon) to turn the LCD backlight on or off, improving visibility in low-light conditions.

Bakım

Elektrot Değişimi

The electrode pins are replaceable. If the pins become dull, bent, or damaged, they should be replaced to ensure accurate readings. Replacement electrodes (10mm length) are not included with the meter and must be purchased separately from authorized BEETECH dealers.

Temizlik ve Depolama

• Wipe the meter with a soft, dry cloth after each use. Do not use abrasive cleaners or solvents.
• Store the meter in its protective pouch in a cool, dry place away from direct sunlight and extreme temperatures.
• If the meter will not be used for an extended period, remove the battery to prevent leakage.

Sorun giderme

If you encounter issues with your BEETECH B-M2 Moisture Meter, please refer to the following common troubleshooting steps:

• Ekranda görüntü yok/Sayaç açılmıyor:
  • Pilin doğru kutuplara takılıp takılmadığını kontrol edin.
  • 9V pili yenisiyle değiştirin.
• Yanlış Okumalar:
  • Ensure the electrode pins are making firm and complete contact with the material.
  • Verify that the correct material mode (Wood or Building Materials) is selected.
  • Check if the electrode pins are damaged or dull; replace if necessary.
  • Ensure the material surface is clean and free from contaminants.
• Ekran loş:
  • Press the backlight button to activate the backlight.
  • Replace the battery if the display remains dim even with the backlight on.

If the problem persists after attempting these steps, please contact BEETECH customer support for further assistance.

Özellikler

Garanti ve Destek

For warranty information, technical support, or service inquiries regarding your BEETECH B-M2 Moisture Meter, please refer to the warranty card included with your product or contact BEETECH customer service directly. Contact details can typically be found on the manufacturer's official websitede veya ürün ambalajında ​​yer almamaktadır.