Reoshine Motion Sensor LED Puck Lights User Manual

giriiş

Thank you for choosing Reoshine Motion Sensor LED Puck Lights. This manual provides detailed instructions for the safe and efficient use of your new lighting product. Please read this manual thoroughly before installation and operation, and retain it for future reference.

Image: Three Reoshine Motion Sensor LED Puck Lights, showcasing their compact, round design with a central motion sensor and LED array.

Ürün Özellikleri

• Brightness & Dimmability: Up to 150 lumens with 6000K clean white light. Adjustable brightness from 20LM (min) to 150LM (max).
• Gelişmiş Hareket Sensörü: Features Reoshine Constant-Sense technology for reliable motion detection.
• Üç Çalışma Modu:
  • Sürekli AÇIK: Işık sürekli yanık kalıyor.
  • AUTO NIGHT: Motion detection activates light only in dark or dim conditions.
  • AUTO DAY & NIGHT: Motion detection activates light in both day and night conditions.
• Enerji Verimliliği: Powered by 3 AA batteries (not included), offering up to 12 months of use in motion sensor mode (based on 10 activations per day, 20 seconds each).
• Kablosuz Kurulum: Designed for areas without electrical access.
• Çok Yönlü Montaj: Can be installed using strong 3M adhesives with magnetic backing or screws.
• Geniş Uygulama: Suitable for closets, cabinets, kitchens, stairs, wardrobes, attics, basements, bedrooms, and other indoor spaces.

Image: A detailed diagram showing the three operating modes (ON, AUTO NIGHT, AUTO DAY & NIGHT) and the dimmer controls (+/- buttons) on the Reoshine puck light.

Paket İçeriği

Paketin içeriği şu şekildedir:

• Reoshine Motion Sensor LED Puck Lights (3 units)
• Adhesive Iron Sheets (for magnetic mounting)
• Screws (for screw mounting)

Note: 3 AA batteries are required per light and are not included in the package.

Özellikler

Kurulum ve Yükleme

The Reoshine Motion Sensor LED Puck Lights offer two primary installation methods: adhesive magnetic mounting or screw mounting.

1. Pil Kurulumu

1. Gently twist the back cover of the light counter-clockwise to open the battery compartment.
2. Insert three (3) AA batteries into the compartment, ensuring correct polarity (+/-).
3. Replace the back cover by aligning it and twisting clockwise until secure.

Image: A visual guide demonstrating the two installation methods (adhesive magnetic and screw mounting) and the battery compartment for 3 AA batteries.

2. Montaj Seçenekleri

Option A: Adhesive Magnetic Mounting

1. Kurulum yapılacak yüzeyi iyice temizleyerek kuru ve toz veya yağdan arındırılmış olduğundan emin olun.
2. Peel the protective film from one side of an adhesive iron sheet.
3. Attach the adhesive side firmly to the clean installation surface.
4. The light has a built-in magnet. Simply attach the light to the iron sheet. This allows for easy removal for battery replacement.

Seçenek B: Vidalı Montaj

1. Separate the back plate from the light unit.
2. Position the back plate on the desired surface and mark the screw holes.
3. Gerekirse pilot delikler açın.
4. Secure the back plate to the surface using the provided screws.
5. Attach the light unit to the secured back plate.

Önerilen Kurulum Yerleri: Under cabinets, inside closets, along stairways, in hallways, or any indoor area requiring supplemental lighting.

Kullanım Talimatları

The Reoshine Motion Sensor LED Puck Light features a slide switch for mode selection and +/- buttons for brightness adjustment.

1. Mod Seçimi

Locate the slide switch on the side of the light. Move the switch to select one of the following modes:

• AÇIK: The light will remain continuously on, regardless of motion or ambient light conditions.
• AUTO NIGHT (Moon Icon): In this mode, the motion sensor will activate the light only when motion is detected in dark or dim environments. The light will turn off approximately 20 seconds after motion ceases.
• AUTO DAY & NIGHT (Sun/Moon Icon): In this mode, the motion sensor will activate the light when motion is detected, regardless of ambient light conditions (day or night). The light will turn off approximately 20 seconds after motion ceases.

Image: A visual comparison of the "Day & Night Motion Sensor Mode" (light activates with motion in any light condition) and "Night Sensor Mode" (light activates with motion only in dark conditions).

2. Parlaklık Ayarı

To adjust the brightness, use the '+' and '-' buttons located on the light unit:

• ' tuşuna basın+' button to increase the brightness.
• ' tuşuna basın-' button to decrease the brightness.

The brightness can be adjusted between 20 lumens (minimum) and 150 lumens (maximum).

3. Hareket Sensörünün Çalışması

The integrated motion sensor has a detection angle of 120 degrees and a range of up to 10 feet. The light will remain on as long as continuous motion is detected within its range. After approximately 20 seconds of no detected motion, the light will automatically turn off (in AUTO modes).

Image: A diagram showing a person walking and the 120-degree, 10-foot detection range of the motion sensor.

Bakım

• Temizlik: Açık renkli yüzeyi yumuşak, kuru bir bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
• Pil Değişimi: When the light output diminishes or the motion sensor becomes less responsive, it is time to replace the batteries. Always replace all three AA batteries simultaneously with new ones. Do not mix old and new batteries or different battery types.
• Pil Bertarafı: Kullanılmış pilleri yerel düzenlemelere göre atın.
• Depolamak: If storing the lights for an extended period, remove the batteries to prevent leakage.

Sorun giderme

Garanti ve Destek

Reoshine products are designed for reliability and performance. For any questions, concerns, or technical support regarding your Motion Sensor LED Puck Lights, please contact Reoshine customer service.

Lütfen satın alma belgelerinize veya perakendecinin belgelerine bakın webBelirli garanti detayları ve iletişim bilgileri için siteyi ziyaret edin.

Ayrıca ziyaret edebilirsiniz Reoshine Store on Amazon Daha fazla bilgi ve ürün güncellemeleri için.