IBELL Profesyonel Alet Seti TD13-100 Kullanım Kılavuzu

giriiş

Thank you for choosing the IBELL Professional Tool Kit TD13-100. This comprehensive kit is designed to assist you with a wide range of home improvement, repair, and DIY tasks. It includes a powerful 650W Impact Drill and 115 essential tools and accessories, providing versatility and efficiency for various applications.

This manual provides important information regarding the safe operation, proper use, and maintenance of your tool kit. Please read it thoroughly before using the product and keep it for future reference.

Genel Güvenlik Bilgileri

Yangın, elektrik çarpması ve kişisel yaralanma riskini azaltmak için elektrikli aletleri kullanırken her zaman temel güvenlik önlemlerine uyun.

• Çalışma Alanı Güvenliği: Çalışma alanınızı temiz ve iyi aydınlatılmış tutun. Dağınık veya karanlık alanlar kazalara davetiye çıkarır. Elektrikli aletleri yanıcı sıvılar, gazlar veya toz gibi patlayıcı ortamlarda çalıştırmayın.
• Elektriksel Güvenlik: Elektrikli aletlerin fişleri prize uygun olmalıdır. Fişte hiçbir şekilde değişiklik yapmayın. Borular, radyatörler, ocaklar ve buzdolapları gibi topraklanmış yüzeylerle vücut temasından kaçının.
• Kişisel Güvenlik: Always wear eye protection. Use dust mask, non-skid safety shoes, hard hat, or hearing protection for appropriate conditions. Dress properly; do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.
• Alet Kullanımı ve Bakımı: Elektrikli aleti zorlamayın. Uygulamanız için doğru elektrikli aleti kullanın. Herhangi bir ayarlama yapmadan, aksesuar değiştirmeden veya elektrikli aletleri saklamadan önce fişi prizden çekin.
• Bakım: Elektrikli aletlerin bakımını yapın. Hareketli parçaların yanlış hizalanması veya bağlanması, parçaların kırılması ve elektrikli aletin çalışmasını etkileyebilecek diğer tüm durumları kontrol edin. Hasarlı ise, elektrikli aleti kullanmadan önce tamir ettirin.

Paket İçeriği

Your IBELL Professional Tool Kit TD13-100 comes with a comprehensive set of tools and accessories neatly organized in a durable carrying case. Please verify all items are present upon unpacking.

Şekil 1: Üzeriview of the IBELL Professional Tool Kit TD13-100 contents.

The kit includes, but is not limited to, the following items:

• 1 x 650W Hammer Drill
• 1 x Yardımcı Sap
• 1 x Depth Gauge
• 3 x Tornavida
• 10 Tornavida Bits x
• 1 x Screwdriver Head
• 1 x Esnek Şaft
• 9 x Socket Wrenches
• 1 x Adjustable Knife
• 8 x Allen Key Set
• 3 x Steel Bits
• 3 x Wood Bits
• 3 x Cement & Concrete Bits
• 1 x Ölçüm Bandı
• 1 x Plier
• 1 x Adjustable Wrench
• 1 x Claw Hammer
• 1 x Su Terazisi
• 1 x Digital Tester
• 1 x Insulation Tape
• 1 x PVC Tape
• 60 x Screws & Fischers (assorted)

Ürün Bittiview: Impact Drill Components

Familiarize yourself with the key components of the IBELL 650W Impact Drill for safe and effective operation.

Figure 2: Key components of the IBELL 650W Impact Drill.

• Automatic Chuck: Holds drill bits securely. Keyless design allows for quick bit changes.
• Derinlik Ölçer: İstenilen delme derinliğini ayarlamak için kullanılır.
• Yardımcı Kulp: Çalışma sırasında ekstra kavrama ve kontrol sağlar.
• Açma / kapama düğmesi: Activates and deactivates the drill.
• Değişken Hız Kontrolü: Adjusts the drilling speed based on material and application.
• Switch Lock On Button: Locks the ON/OFF switch for continuous operation.
• Forward/Reverse Rotation Control Lever: Changes the direction of rotation for drilling or screw driving/removing.
• Drill/Hammer Function Selector: Switches between standard rotary drilling and hammer drilling modes.

Kurmak

1. Ambalajın Açılması ve Muayene

Carefully remove all components from the packaging. Inspect the tool kit for any signs of damage during transit. If any damage is found, do not use the tool and contact customer support.

2. Yardımcı Sapın Takılması

1. Yardımcı kolu saat yönünün tersine çevirerek gevşetin.
2. Slide the handle onto the front of the drill body, positioning it to your comfort and control.
3. Rotate the handle clockwise to tighten it securely. Ensure it is firmly attached before operation.

3. Inserting and Removing Drill Bits (Keyless Chuck)

1. Matkabın güç kaynağından çekildiğinden emin olun.
2. Rotate the chuck collar counter-clockwise until the jaws are open wide enough to insert the drill bit.
3. Matkap ucunu mandrene tam olarak yerleştirin.
4. Rotate the chuck collar clockwise to tighten the jaws firmly around the drill bit. Hand-tighten until the bit is secure and does not slip.
5. Çıkarmak için, çeneleri gevşetmek ve ucu dışarı çekmek için mandrenin yakasını saat yönünün tersine çevirin.

4. Setting the Depth Gauge

1. Derinlik ölçerini yardımcı tutamaktaki deliğe yerleştirin.
2. Adjust the depth gauge to the desired drilling depth by sliding it forward or backward. The tip of the drill bit should extend beyond the end of the depth gauge by the desired drilling depth.
3. Tighten the auxiliary handle to secure the depth gauge in place.

Kullanım Talimatları

1. Açma/Kapama ve Değişken Hız Kontrolü

1. To turn the drill ON, press the ON/OFF switch.
2. To turn the drill OFF, release the ON/OFF switch.
3. The drill features variable speed control. The harder you press the ON/OFF switch, the faster the drill will rotate. This allows for precise control over drilling speed.
4. For continuous operation, press the ON/OFF switch and then press the Switch Lock On Button. To release, press the ON/OFF switch again.

2. İleri/Geri Dönüş

The Forward/Reverse Rotation Control Lever is located above the ON/OFF switch.

• Push the lever to the left for forward rotation (clockwise), suitable for drilling and driving screws.
• Push the lever to the right for reverse rotation (counter-clockwise), suitable for removing screws or freeing a jammed drill bit.

Always ensure the drill has come to a complete stop before changing the rotation direction.

3. Drill/Hammer Function Selector

The selector switch is located on the top of the drill body.

• Drill Mode (Rotary): Select this mode for drilling into wood, metal, plastics, and for screw driving.
• Hammer Drill Mode (Rotary with Impact): Select this mode for drilling into masonry, concrete, and brick. The hammer action provides a pounding motion in addition to rotation, aiding in faster penetration of hard materials.

Always use appropriate drill bits for the selected mode and material.

4. Using Other Tools and Accessories

The kit includes a variety of hand tools and accessories. Refer to the specific application for each tool:

• Screwdrivers & Bits: Use for fastening and unfastening screws. Select the correct bit type (Phillips, flathead, Torx, etc.) and size for the screw head.
• Pliers & Wrenches: For gripping, bending, cutting wires, and tightening/loosening nuts and bolts.
• Çekiç: For driving nails or light demolition tasks.
• Measuring Tape & Spirit Level: For accurate measurements and ensuring surfaces are level.
• Digital Tester: For basic electrical circuit testing. Always exercise extreme caution when working with electricity.

Bakım

Regular maintenance ensures the longevity and optimal performance of your IBELL Tool Kit.

1. Temizlik

• Always unplug the drill before cleaning.
• Wipe down the exterior of the drill and other tools with a clean, damp bez. Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.
• Use compressed air to clear dust and debris from ventilation openings of the drill.
• Clean drill bits and accessories after each use to prevent rust and maintain sharpness.

2. Depolama

• Store the tool kit in its original carrying case in a dry, secure location, away from direct sunlight and moisture.
• Çocukların ve yetkisiz kişilerin erişemeyeceği yerde saklayın.
• Ensure all tools are clean and dry before storing to prevent corrosion.

3. Mandren Bakımı

Periodically inspect the chuck jaws for wear or damage. A small amount of light machine oil can be applied to the chuck jaws to ensure smooth operation, but avoid over-lubrication.

Sorun giderme

If you encounter issues with your IBELL Impact Drill, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact IBELL customer support.

Özellikler

The IBELL Professional Tool Kit TD13-100 features the following technical specifications for its impact drill:

Figure 3: Technical Parameters of the IBELL Impact Drill.

• Modeli: TD13-100
• Anma Hacmitage: 230V~50Hz
• Nominal Giriş Gücü: 650 B
• Rated No Load Speed: 0-2800 RPM
• Ayna Kapasitesi: 13mm Keyless Auto Chuck
• Delme Kapasitesi:
  • Ahşap: 25mm
  • Çelik: 12mm
  • Beton: 13mm
• Koruma Sınıfı: Sınıf II
• Ürün Ağırlığı: Yaklaşık 5.05 kg (11.11 pound)
• Ürün Ölçüleri: 16.54 x 4.33 x 13.78 inç

Garanti ve Destek

Specific warranty details for the IBELL Professional Tool Kit TD13-100 are not provided within this manual. For information regarding warranty coverage, terms, and conditions, please refer to the product packaging, any included warranty cards, or contact IBELL customer support directly.

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please reach out to the manufacturer's customer service department. Contact information can typically be found on the product packaging or the official IBELL webalan.