1. Ürün Bittiview
The Einhell TC-TC 800 Tile Cutter is designed for precise and efficient cutting of wall and floor tiles. This robust tool is suitable for various home renovation projects, offering clean cuts with minimal dust thanks to its water cooling system.
Temel Özellikler:
- Robust Stainless Steel Table: Measuring 395 x 385 mm, it is easy to clean and features an angular scale up to 45° with non-slip feet for stable operation.
- Precise Cutting Guide: Ensures exact and straight cuts. The angle stop is adjustable from -45° to +45° for miter cuts.
- Integrated Water Reservoir: Provides necessary water cooling for the saw blade, protecting it from heat damage.
- Kesme Kapasitesi: Maximum cutting height of 14 mm at 45° and 34 mm at 90°.
- Güvenlik Görevlisi: A protective guard for the cutting disc ensures user safety from chips and dust.
2. Güvenlik Talimatları
Bu elektrikli aletle birlikte verilen tüm güvenlik uyarılarını, talimatları, çizimleri ve teknik özellikleri mutlaka okuyun ve anlayın. Aşağıda listelenen tüm talimatlara uyulmaması elektrik çarpmasına, yangına ve/veya ciddi yaralanmaya neden olabilir.
Genel Güvenlik Uyarıları:
- Güvenlik gözlüğü, işitme koruyucu ve eldiven dahil olmak üzere uygun kişisel koruyucu ekipman (KKD) kullanın.
- Çalışma alanının temiz, iyi aydınlatılmış ve engellerden arındırılmış olduğundan emin olun.
- Aleti çalıştırırken çocukları ve etraftaki kişileri uzak tutun.
- Never operate the tool if the power cord or plug is damaged.
- Always disconnect the power supply before making any adjustments, changing accessories, or performing maintenance.
- Kesilen malzeme için doğru bıçağı kullanın.
- Ensure the water reservoir is adequately filled before operation to prevent overheating of the blade.
3. Bileşenler Bittiview
Familiarize yourself with the main components of your Einhell TC-TC 800 Tile Cutter:
- Cutting Table (Stainless Steel)
- Diamond Cutting Disc (180 mm diameter)
- Motor Ünitesi
- Su deposu
- Cutting Guide with Scale
- Angle Stop (-45° to +45°)
- Bıçak Koruması
- Açma/Kapama Anahtarı
- Taşıma Sapı
Şekil 1: Üzeriview of the Einhell TC-TC 800 Tile Cutter with its main parts.
4. Kurulum
Before operating the tile cutter, ensure proper setup for safety and optimal performance.
4.1 Paketin Açılması ve Muayene
- Tüm bileşenleri dikkatlice ambalajından çıkarın.
- Inspect the tool for any signs of damage during transit. Do not operate if damaged.
- Listelenen tüm bileşenlerin mevcut olduğundan emin olun.
4.2 Su Deposunun Doldurulması
The integrated water reservoir is essential for cooling the diamond cutting disc and reducing dust.
- Locate the water reservoir beneath the cutting table.
- Fill the reservoir with clean water to the indicated level. Ensure the water pump is submerged.
- Regularly check the water level during operation and refill as needed.
Figure 2: Filling the water reservoir for wet cutting.
4.3 Adjusting the Cutting Guide and Angle Stop
For accurate cuts, adjust the cutting guide and angle stop as required.
- The cutting guide with scale ensures straight cuts. Position it according to your desired measurement.
- For miter cuts, adjust the angle stop between -45° and +45°. Secure it firmly before cutting.
Figure 3: Adjustable angle stop for miter cuts.
5. Kullanım Talimatları
Follow these steps for safe and effective tile cutting.
5.1 Açma/Kapatma
- Connect the tile cutter to a suitable power outlet (240 Volts).
- Açmak için yeşil 'AÇIK' düğmesine basın.
- Kapatmak için kırmızı 'KAPAT' düğmesine basın.
Figure 4: Power switch for turning the machine on and off.
5.2 Kesim Yapma
- Place the tile firmly on the stainless steel cutting table, aligning it with the cutting guide or angle stop as desired.
- Ensure the water pump is active and water is flowing to the blade.
- Turn on the tile cutter.
- Slowly and steadily push the tile through the rotating diamond blade. Avoid excessive force.
- Once the cut is complete, turn off the tile cutter and wait for the blade to stop before removing the tile.
Figure 5: Demonstrating a tile being cut with the machine.
5.3 Resmi Ürün Videosu: Nasıl Kullanılır
Video 1: This video demonstrates the basic operation and usage of a tile cutter, including setup and cutting techniques.
6. Bakım
Regular maintenance ensures the longevity and performance of your tile cutter.
6.1 Su Deposunun Temizlenmesi
After each use, clean the water reservoir to prevent buildup of tile dust and debris.
- Elektrik beslemesini kesin.
- Remove the cutting table or access panel to reach the reservoir.
- Empty the dirty water and thoroughly clean the reservoir with fresh water.
- Bileşenleri yeniden birleştirin.
6.2 Bıçak Değişimi
Replace the diamond cutting disc when it becomes dull or damaged.
- Aletin fişinin çekili olduğundan emin olun.
- Use the provided tool to loosen the blade retaining nut.
- Carefully remove the old blade and install the new 180 mm diamond cutting disc, ensuring it is correctly oriented.
- Tighten the retaining nut securely.
7. Sorun Giderme
This section addresses common issues you might encounter with your tile cutter.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Poor cut quality (chipping, uneven edges) | Dull or incorrect blade; insufficient water cooling; pushing too fast. | Replace blade with a suitable diamond disc; ensure water reservoir is full and pump is working; reduce feeding speed. |
| Water overflow from table | Water channels blocked; reservoir too full; uneven surface. | Clean water channels; do not overfill reservoir; ensure the machine is on a level surface. |
| Makine başlamıyor | Güç kaynağı yok; arızalı anahtar; motor sorunu. | Check power connection and circuit breaker; test the power outlet; contact customer support if switch or motor is faulty. |
| Rusted screws/components | Lack of proper drying/maintenance after wet use. | Regularly clean and dry all metal components after use. Apply a rust preventative lubricant (e.g., WD-40) to screws and moving parts. |
8. Özellikler
| Özellik | Detay |
|---|---|
| Marka | Einhell |
| Model Numarası | 4301185 |
| Güç | 800 Watt |
| Cilttage | 240 Volt |
| Hız | 2950 RPM |
| Diamond Cutting Disc Diameter | 180 mm |
| Maksimum Kesme Yüksekliği (90°) | 34 mm |
| Maksimum Kesme Yüksekliği (45°) | 14 mm |
| Angle of Cut | 45 Derece |
| Masa Ölçüleri (Uzunluk x Genişlik) | 39.6 cm x 38.5 cm |
| Ürün Boyutları (U x G x Y) | 39.6l. x 38.5an. x 25.5al. centimeters |
| Ürün Ağırlığı | 9.1 Kilogram |
| Güç Kaynağı | Kablolu elektrik |
| Özel Özellikler | Adjustable angle stop, parallel stop with scale |
9. Garanti ve Destek
9.1 Garanti Bilgileri
This Einhell product comes with a 2 yıllık sınırlı garantiHerhangi bir garanti talebi için lütfen satın alma belgenizi saklayın.
9.2 Müşteri Desteği
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell webEn güncel iletişim bilgileri için lütfen sitenize veya ürün ambalajınıza bakın.