SatelliteSale RC73-2
DIRECTV RC73 IR/RF Uzaktan Kumanda Kullanım Kılavuzu
Modeli: RC73-2
Marka: UyduSatışı
giriiş
This manual provides comprehensive instructions for the setup, operation, and maintenance of your SatelliteSale DIRECTV RC73 IR/RF Remote Control. Designed for compatibility with DIRECTV Genie HR44 and C41 clients, this remote offers both Infrared (IR) and Radio Frequency (RF) capabilities for versatile control of your entertainment system.

Figure 1: Two DIRECTV RC73 remote controls, showing the front face with buttons and the included AA batteries.
Neler Dahildir:
- Two (2) DIRECTV RC73 IR/RF Remote Controls
- Four (4) AA Batteries (two per remote)
Kurulum ve Programlama
1. Pil Kurulumu
The RC73 remote requires two (2) AA batteries for operation. Ensure correct polarity when inserting.
- Uzaktan kumandanın arkasındaki pil bölmesi kapağını bulun.
- Açmak için kapağı aşağı doğru kaydırın.
- Insert two (2) AA batteries, matching the positive (+) and negative (-) terminals as indicated inside the compartment.
- Kapağı güvenli bir şekilde yerine oturuncaya kadar yerine kaydırın.
2. Pairing with DIRECTV Receiver (RF Mode)
For optimal performance and to control your receiver without direct line-of-sight, pair your RC73 remote in RF (Radio Frequency) mode. This is typically done with Genie HR44 and C41 clients.
- Point the remote at your DIRECTV receiver.
- Basılı tutun SESSİZ Ve GİRMEK Kumandanın üst kısmındaki yeşil ışık iki kez yanıp sönene kadar düğmelere aynı anda basın.
- On your TV screen, a message should appear indicating that the remote is now programmed for RF.
- If no message appears, navigate to the receiver's menu: MENÜ > Settings & Help > Ayarlar > Uzaktan kumanda > Uzaktan ProgramlamaEkranda beliren yönergeleri izleyerek eşleştirme işlemini tamamlayın.
3. Programming for TV Control (IR Mode)
To control your television's power, volume, and input, you will need to program the remote using IR (Infrared) mode.
- Televizyonunuzu açın.
- Basılı tutun SESSİZ Ve SEÇME Kumandanın üst kısmındaki yeşil ışık iki kez yanıp sönene kadar düğmelere aynı anda basın.
- Enter the 5-digit code for your TV brand. Common codes can be found in your TV's manual or online. If you don't know the code, try common codes like 10000, 10001, etc.
- After entering the code, point the remote at your TV and press the GÜÇ button. If the TV turns off, the code is correct.
- If the TV does not turn off, repeat steps 2-4 with a different code.
- Televizyon kapandıktan sonra, tuşuna basın. SEÇME button to save the code. The green light will flash twice.
Uzaktan Kumandanızı Çalıştırma
The RC73 remote features a streamlined design with essential buttons for navigating DIRECTV content and controlling basic TV functions.

Figure 2: Top section of the RC73 remote, highlighting control buttons.
Düğme Fonksiyonları:
| Düğme | İşlev |
|---|---|
| RC73 AÇIK/KAPALI | Turns the DIRECTV receiver on or off. |
| REHBER | Program rehberini görüntüler. |
| MENÜ | Ayarlar ve özellikler için ana menüye erişim sağlar. |
| LİSTE | Displays your recorded programs (Playlist). |
| EXIT | Geçerli menüden veya ekrandan çıkar. |
| SEÇME | Bir seçimi onaylar. |
| Gezinme Okları | Navigates through menus and guide. |
| geri | Önceki ekrana veya menüye geri döner. |
| BİLGİ | Geçerli program veya seçime ilişkin bilgileri görüntüler. |
| VOL (Ses) | Adjusts the television volume (after TV programming). |
| CH (Kanal) | Changes the DIRECTV channel. |
| ÖNCEKİ | Önceki kanala döner. |
| R (Record) | Mevcut programı kaydeder. |
| Oynatma Kontrolleri | Rewind, Play/Pause, Fast Forward, Skip Back, Skip Forward, Stop. |
| Sayısal Tuş Takımı (0-9) | Doğrudan kanal girişi. |
| ENTER (input) | Confirms numeric input or changes TV input (if programmed). |
Uyumluluk
- The RC73 remote is designed to replace older RC71 and RC72 models, offering enhanced support for newer television models.
- It utilizes both Infrared (IR) and Radio Frequency (RF) technology. RF mode is primarily used for DIRECTV Genie HR44 and C41 clients, allowing control without direct line-of-sight.
- For older DIRECTV receivers, the remote will operate in IR mode only, requiring a direct line-of-sight to the receiver.
- TV control (power, volume, input) is achieved via IR mode and requires programming with your TV's specific code.
Sorun giderme
| Sorun | Olası Çözüm |
|---|---|
| Remote not responding to receiver. |
|
| Cannot control TV volume or power. |
|
| Green light on remote flashes but no action. |
|
| Remote feels sluggish or buttons are unresponsive. |
|
Özellikler
| Özellik | Detay |
|---|---|
| Model Numarası | RC73-2 |
| Ürün Boyutları | 9.7 x 4.6 x 1.9 inç |
| Ürün Ağırlığı | 9.6 ons |
| Güç Kaynağı | 2 x AA Batteries (per remote) |
| Bağlantı | Infrared (IR) and Radio Frequency (RF) |
| Uyumlu Cihazlar | DIRECTV Genie HR44, C41 clients, older DIRECTV receivers (IR mode), various Televisions, DVD/Blu-ray Players, home appliances (via IR programming) |
| Maksimum Desteklenen Cihaz Sayısı | 1 (DIRECTV receiver) + 1 (TV/Audio device) |
| Renk | Gri |
| Özel Özellik | Original DirecTV Equipment |
Bakım
- Keep the remote clean by wiping it with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials.
- Do not expose the remote to extreme temperatures, humidity, or direct sunlight.
- Uzaktan kumandayı uzun süre kullanmayacaksanız, pil sızıntısını önlemek için pilleri çıkarın.
Garanti Bilgileri
This product is covered by a standard manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims, please refer to the documentation provided with your purchase or contact SatelliteSale customer support.
Garanti işlemleri için satın alma belgenizi saklayın.
Müşteri Desteği
If you encounter any issues not covered in this manual or require further assistance, please contact SatelliteSale customer support.
For the most up-to-date contact information, please visit the official SatelliteSale webLütfen siteye bakın veya ürün ambalajınıza göz atın.
Sıkça sorulan sorulara yanıt bulmak için çevrimiçi kaynaklar ve SSS'ler de mevcut olabilir.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.