Furman P-8 PRO C

Furman P-8 PRO C Güç Düzenleyici Kullanım Kılavuzu

Model: P-8 PRO C | Brand: Furman

1. Giriş

The Furman P-8 PRO C is a professional-grade power conditioner designed to provide advanced protection and clean power for your valuable audio, video, and electronic equipment. It incorporates Furman's exclusive Series Multi-Stage Koruması (SMP), Doğrusal Filtreleme Teknolojisi (LiFT) ve Aşırı Hacimtage Shutdown (EVS) to safeguard against power surges, spikes, and AC line noise, ensuring optimal performance and longevity of your connected devices.

2. Güvenlik Bilgileri

WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not remove cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.

  • Always connect the P-8 PRO C to a properly grounded 20-amp elektrik prizi.
  • Do not overload the unit. The total current draw of all connected equipment must not exceed 20 amps.
  • Ünitenin çevresinde yeterli havalandırma olduğundan emin olun. Havalandırma açıklıklarını hiçbir şekilde kapatmayın.
  • Keep liquids away from the unit.
  • Öneri 65 Uyarısı: Bu ürün, Kaliforniya Eyaleti tarafından kansere ve doğum kusurlarına veya üremeyle ilgili diğer zararlara neden olduğu bilinen kimyasallar içerebilir.

3. Ürün Özellikleri

3.1. Advanced Protection Technologies

  • Seri Çoklu Stage Protection (SMP): Furman's SMP circuit provides superior surge suppression, absorbing and dissipating damaging transient voltages without sacrificing itself. This ensures continuous protection for your equipment.
  • Linear Filtering Technology (LiFT): LiFT significantly reduces AC line noise across a wide frequency range, delivering cleaner power to your sensitive electronics. This results in improved audio clarity and video resolution.
  • Aşırı Hacimtage Shutdown (EVS): The EVS circuit continuously monitors incoming voltage. If it detects an unsafe overvoltage condition (exceeding 137 volts), it automatically shuts down the connected equipment to prevent damage, then restores power once voltage güvenli seviyeye geri döner.

3.2. Outlets and Power

  • Toplam Satış Noktaları: 9 (1 front-panel convenience outlet, 8 rear-panel outlets).
  • Rear Outlets: İle tasarlandı ample spacing to accommodate 'wall wart' power supplies and feature security strapping to prevent accidental disconnections.
  • Güç Kablosu: Integrated 10-foot, 12-gauge power cord.
  • Ampöfke: 20-amp capacity, requiring a 20-amp female receptacle or a Furman ADP-1520B adapter for connection.

3.3. Ek Özellikler

  • BNC Konnektörü: A BNC connector is located on the rear panel for optional GN-LED or GN-I gooseneck lights (sold separately) to illuminate the rear of your rack.
  • Rafa Monte Edilebilir Tasarım: Standard 1U rack-mount chassis for easy integration into professional setups.

4. Kurulum ve Kurulum

4.1. Raf Montajı

The P-8 PRO C is designed for standard 1U rack installation. Secure the unit using appropriate rack screws (not included) through the mounting ears on both sides of the front panel. Ensure sufficient space for ventilation.

4.2. Güç Bağlantısı

  1. Connect the integrated 10-foot, 12-gauge power cord from the P-8 PRO C to a dedicated 20-amp, 120-volt AC grounded electrical outlet. If a 20-amp receptacle is not available, use a Furman ADP-1520B adapter.
  2. Ensure the main power switch on the front panel of the P-8 PRO C is in the OFF position before connecting any equipment.

4.3. Ekipmanların Bağlantısı

Plug your audio, video, or electronic equipment into the 8 rear-panel outlets and the 1 front-panel convenience outlet. Utilize the wide spacing of the rear outlets for larger power adapters. For critical equipment, consider using the security strapping to prevent accidental unplugging.

Arka view of the Furman P-8 PRO C Power Conditioner showing 8 rear outlets and power input.
Şekil 1: Rear panel of the Furman P-8 PRO C, illustrating the 8 spaced outlets for connecting various equipment and the main power input.
Ön view of the Furman P-8 PRO C Power Conditioner showing the front convenience outlet and indicator lights.
Şekil 2: Front panel of the Furman P-8 PRO C, featuring the convenience outlet, power switch, and protection indicator lights.

4.4. Optional Gooseneck Lights

If desired, connect optional Furman GN-LED or GN-I gooseneck lights to the BNC connector on the rear panel for rack illumination.

5. Operasyon

5.1. Açma/Kapama

Once all equipment is connected, flip the main power switch on the front panel to the ON position. The P-8 PRO C will power on, and connected equipment will receive conditioned and protected power.

5.2. Gösterge Işıkları

  • Protection OK (Green LED): This indicator illuminates green when the SMP circuit is active and providing surge protection. If this light is off, the unit's surge protection has been compromised, and the unit should be serviced.
  • Aşırı Hacimtage (Red LED): This indicator illuminates red when the incoming voltage exceeds safe operating levels (above 137 volts). The EVS circuit will shut down power to connected equipment until the voltage returns to a safe range.

6. Bakım

The Furman P-8 PRO C is designed for reliable, maintenance-free operation. No user-serviceable parts are inside. For cleaning, disconnect the unit from the power source and wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents.

7. Sorun Giderme

7.1. No Power to Outlets

  • Check the main power switch on the front panel to ensure it is in the ON position.
  • Verify that the P-8 PRO C is securely plugged into a functioning 20-amp duvar prizi.
  • Check the circuit breaker on the P-8 PRO C (usually located near the power cord input) and reset if tripped.
  • If the 'Extreme Voltage' indicator is lit, the incoming voltage is too high. The unit will automatically restore power when conditions normalize.
  • If the 'Protection OK' indicator is off, the surge protection circuit may be compromised. Discontinue use and contact Furman support.

7.2. Audio/Video Noise

  • Tüm ekipmanın uygun şekilde topraklandığından emin olun.
  • Gevşek kablo bağlantılarını kontrol edin.
  • The LiFT technology in the P-8 PRO C is designed to reduce AC line noise. If noise persists, try isolating the source of the noise by unplugging devices one by one.

8. Özellikler

ÖzellikŞartname
ÖrnekP-8 PRO C
Giriş Voltage120V AC (Nominal)
Çıkış Hacmitage120V AC (Nominal)
Mevcut Kapasite20 Amps
Netage2400 Watt
Çıkışlar9 (1 Ön, 8 Arka)
Güç Kablosu10 ft, 12 AWG
Boyutlar (Y x G x D)1.75" x 19" x 11" (1U Rackmount)
AğırlıkApproximately 0.01 ounces (Note: This weight is from provided data and may be a placeholder or error.)
Koruma ModlarıLine to Neutral, Neutral to Ground, Line to Ground
FiltrelemeLinear Filtering Technology (LiFT)
aşırı sestage KapatmaAşırı Hacimtage Shutdown (EVS) at >137V AC
Rear IlluminationBNC connector for optional gooseneck lights

9. Kutuda Neler Var?

  • 1 x Furman P-8 PRO C Power Conditioner

10. Garanti ve Destek

Furman products are backed by a limited warranty. For detailed warranty information, product registration, and technical support, please visit the official Furman webSite üzerinden satın alabilir veya müşteri hizmetleriyle iletişime geçebilirsiniz. Garanti talepleriniz için satın alma belgenizi saklayın.