A&D Waterproof Interval Timer AD-5709TL User Manual

1. Giriş

Satın aldığınız için teşekkür ederizasing the A&D Waterproof Interval Timer AD-5709TL. This versatile timer is designed for various applications, from kitchen use to sports training, offering precise timing and robust features. Its IPX7 waterproof rating ensures durability in wet environments, while its multi-timer and repeat functions provide flexibility for complex timing needs. Please read this manual carefully to ensure proper use and maintenance of your device.

Şekil 1.1: Ön view of the A&D Waterproof Interval Timer AD-5709TL, displaying its digital screen and control buttons.

2. Temel Özellikler

• IPX7 Fully Waterproof: Designed to withstand splashes and submersion, ideal for kitchen and outdoor use.
• Çoklu Zamanlayıcı Fonksiyonu: Capable of memorizing and running up to 8 individual timer settings sequentially.
• Tekrarlama İşlevi: Set the timer to repeat from 1 to 999 times, or for an indefinite duration.
• Çift Alarm Bildirimi: Alerts with both a red LED light (blinks for approx. 30 seconds) and a buzzer sound (5 or 30 seconds duration).
• Countdown & Count-up Modes: Functions as a countdown timer for set intervals and a count-up timer from zero.
• Hafıza Fonksiyonu: Stores frequently used timer settings for quick recall.
• Manyetik Destek: Equipped with a magnet for convenient attachment to metal surfaces.

Figure 2.1: The timer's magnetic backing allows for easy attachment to metal surfaces, as shown with paper clips.

Figure 2.2: The timer is shown submerged in water, highlighting its IPX7 waterproof rating for use in wet environments.

3. Kurulum

3.1. Paket İçeriği

• A&D Waterproof Interval Timer AD-5709TL
• Kullanım Kılavuzu
• CR2032 Lithium Battery (for monitor use)

3.2. Pil Kurulumu

The timer uses one CR2032 lithium battery. A battery is included for initial monitoring purposes. For long-term use, it is recommended to replace it with a new battery.

1. Zamanlayıcının arka tarafında bulunan pil bölmesini bulun.
2. Use a coin or a flat tool to twist the battery cover counter-clockwise to open.
3. CR2032 pili pozitif (+) tarafı yukarı bakacak şekilde yerleştirin.
4. Pil kapağını yerine takın ve saat yönünde çevirerek sabitleyin.

Şekil 3.1: Arka view of the timer, illustrating the battery compartment and the CR2032 battery for installation.

3.3. İlk Güç Açma

Once the battery is correctly installed, the timer will automatically power on and display '00:00'.

4. Operasyon

4.1. Düğme Fonksiyonları

4.2. Setting a Countdown Timer

1. Ensure the timer display is '00:00'. If not, press the Durmak sıfırlamak için düğmeye basın.
2. Kullanın 1分, 10秒, Ve 10分 buttons to set your desired countdown time. The maximum setting is 99 minutes 50 seconds, and the minimum is 10 seconds.
3. Basın スタート/ポーズ Geri sayımı başlatmak için düğmeye basın.
4. Geri sayımı durdurmak için basın. スタート/ポーズ Tekrar basın. Devam etmek için bir kez daha basın.
5. When the timer reaches zero, the alarm will sound (buzzer for 5 or 30 seconds) and the red LED will blink for approximately 30 seconds.
6. Basın Durmak button to silence the alarm and reset the timer to the last set time.

4.3. Using Multiple Timers (Sequential Operation)

The AD-5709TL can store and run up to 8 sequential timer settings. This is ideal for interval training or multi-step processes.

1. Set the first timer duration using the 1分, 10秒, Ve 10分 düğmeler.
2. Basın メモリ button to save this setting as Step 1. The display will show '00:00' or the next step number.
3. Repeat the process to set and save up to 8 steps. Each time you press メモリ, it saves the current setting and moves to the next step number.
4. Once all steps are set, press スタート/ポーズ to begin the sequence. The timer will count down each step consecutively.
5. The alarm will sound after each step completes, and the timer will automatically proceed to the next step.

Şekil 4.1: Ör.ample of sequential timer operation with multiple steps and repeat functionality.

4.4. Tekrarlama Fonksiyonu

After setting your sequential timers (or a single timer), you can set the number of times the sequence should repeat.

1. After setting your timer steps (as described in 4.3), press the メモリ button repeatedly until the display shows the repeat count setting (e.g., 'RPT 001').
2. Kullanın 1分, 10秒, Ve 10分 buttons to adjust the repeat count from 1 to 999.
3. To set for permanent (infinite) repeat, continue pressing the buttons until 'RPT INF' or similar is displayed.
4. Basmak スタート/ポーズ to start the repeating timer sequence.

4.5. Count-up Function

To use the count-up function:

1. Ensure the timer display is '00:00'.
2. Basın スタート/ポーズ button. The timer will immediately start counting up from 00 minutes 00 seconds.
3. Basmak スタート/ポーズ again to pause the count-up.
4. Basın Durmak button to stop the count-up and reset the display to '00:00'.

5. Bakım

5.1. Temizlik

Zamanlayıcıyı temizlemek için yumuşak bir bezle silin.amp cloth. Do not use abrasive cleaners, solvents, or immerse the device in water beyond its IPX7 rating. Ensure the battery compartment is securely closed before cleaning with moisture.

5.2. Pil Değişimi

When the display becomes dim or the timer functions erratically, it's time to replace the battery. Follow the steps in Section 3.2 for battery installation. Always use a new CR2032 lithium battery.

5.3. Depolama

Store the timer in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, it is recommended to remove the battery to prevent leakage.

6. Sorun Giderme

7. Özellikler

Figure 7.1: Visual representation of the timer's dimensions, weight, battery information, and alarm features.

8. Garanti ve Destek

This product is covered by a standard manufacturer's warranty. For warranty claims, technical support, or inquiries, please contact A&D customer service through their official webÜrünü satın aldığınız site veya perakendeci ile iletişime geçin. Garanti geçerliliği için lütfen satın alma belgenizi saklayın.

For more information, visit the official A&D webalan: www.aandd.co.jp