giriiş
Thank you for choosing the WOLTU Adjustable Swivel Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before use and retain them for future reference.
Güvenlik Talimatları
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or faulty.
- Assemble the stools on a soft, clean surface to prevent scratches.
- Always remove the protective cap from the gas lift before assembly.
- 120 kg'lık (264 lbs) maksimum yük kapasitesini aşmayın.
- Çocukları montaj alanından uzak tutun. Küçük parçalar boğulma tehlikesi yaratabilir.
- Tüm vidaların ve bağlantıların sıkılığını düzenli olarak kontrol edin.
- Avoid standing on the stool or using it as a ladder.
- Use the stool only on a flat, stable surface.
Paket İçeriği
Lütfen aşağıda listelenen tüm bileşenlerin paketinizde bulunduğundan emin olun:
- 2 x Seat with backrest (White Faux Leather)
- 2 x Gazlı Kaldırma Silindiri
- 2 x Base Plate (Chrome Metal)
- 2 x Footrest Ring (Chrome Metal)
- Montaj Donanımı (vidalar, rondelalar, Allen anahtarı)
- Kullanım Kılavuzu
Image: Two WOLTU white faux leather bar stools, showcasing the complete product. These stools feature a comfortable seat, backrest, and a chrome-plated base with a footrest.
Montaj Talimatları
Follow these steps to assemble your WOLTU bar stools. It is recommended to have two people for assembly.
- Tabanı Hazırlayın: Place the chrome base plate on a soft, flat surface. Insert the gas lift cylinder into the central hole of the base plate. Ensure the anti-slip rubber ring is securely attached to the bottom of the base.
- Ayak dayanağını takın: Slide the chrome footrest ring over the gas lift cylinder.
- Koltuğu hazırlayın: Carefully place the seat upside down on a soft surface. Attach the mounting plate (usually pre-attached to the seat) to the top of the gas lift cylinder. Ensure the lever for height adjustment is facing the back of the seat.
- Yerinizi ayırtın: Align the holes and use the provided screws and Allen key to firmly attach the seat to the gas lift cylinder. Do not overtighten.
- Son Kontrol: Once assembled, gently test the stability of the stool before full use. Ensure all connections are secure.
Resim: Patlamış view of the bar stool components, highlighting the practical footrest, the maximum load capacity (120 kg), and the anti-slip rubber ring on the base. This image aids in understanding the assembly process. Note: Some visual elements in the image may indicate 150kg, but the product specifications confirm 120kg.
Önemli Not: Before inserting the gas lift into the seat mechanism, ensure you remove the small black protective cap from the top of the gas lift cylinder. Failure to do so will prevent the height adjustment mechanism from functioning.
Kullanım Talimatları
- Yükseklik Ayarı: To raise the seat, lift the lever while standing up. To lower the seat, lift the lever while seated. The seat height is adjustable between 62 cm and 84 cm.
- Döner Fonksiyon: The seat can rotate 360 degrees for ease of movement and access.
- Ayak dayama yeri: Utilize the integrated footrest for added comfort and support.
Image: This diagram visually explains the 360-degree swivel capability and the height adjustment range of the stool. The seat height can be adjusted by 22 cm, from a minimum of 62 cm to a maximum of 84 cm.
Bakım
- Temizlik: Wipe the faux leather seat with a soft, damp Bez kullanın. İnatçı lekeler için hafif bir sabun çözeltisi kullanın ve hemen kurulayın. Aşındırıcı temizleyicilerden veya sert kimyasallardan kaçının.
- Metal parçalar: Clean chrome metal parts with a soft, dry cloth. Do not use abrasive materials that could scratch the finish.
- Denetleme: Periodically check all screws and connections for tightness. Retighten if necessary to maintain stability and safety.
- Zemin Koruması: Ensure the anti-slip rubber ring on the base remains intact to protect your floor from scratches.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Taburenin yüksekliği ayarlanmamaktadır. | Protective cap still on gas lift. | Disassemble the seat from the gas lift and remove the black protective cap from the top of the gas lift cylinder. Reassemble. |
| Stool is wobbly or unstable. | Gevşek vidalar veya düz olmayan yüzey. | Check and tighten all assembly screws. Ensure the stool is on a flat, level floor. |
| Scratching noise when moving. | Anti-slip ring damaged or missing. | Inspect the anti-slip rubber ring on the base. Replace if damaged. Ensure the floor is clean. |
Özellikler
- Marka: WOLTU
- Model Numarası: 9108
- Renk: Beyaz
- Malzeme: Faux Leather (seat), Chrome Metal (frame, base)
- Ürün Ölçüleri (U x G x Y): 38 x 44 x 114 cm (yaklaşık 15 x 17.3 x 44.9 inç)
- Ayarlanabilir Koltuk Yüksekliği: 62 - 84 cm (yaklaşık 24.4 - 33.1 inç)
- Taban Çapı: 39 cm (yaklaşık 15.4 inç)
- Ürün Ağırlığı: 15 kg (approx. 33 lbs) per stool
- Maksimum Yük Kapasitesi: 120 kg (yaklaşık 264 lbs)
- Özellikler: 360° Swivel, Height Adjustable, Ergonomic Backrest, Footrest, Anti-slip Base
Image: A comprehensive diagram illustrating the key dimensions of the WOLTU bar stool, including overall height (93-114cm), adjustable seat height (62-84cm), seat width (44cm), seat depth (37cm), and backrest height (32cm). Note: Some visual elements in the image may indicate 150kg, but the product specifications confirm 120kg.
Garanti ve Destek
WOLTU products are designed for quality and durability. For warranty information or customer support, please refer to the purchase documentation or contact your retailer. Keep your proof of purchase for any warranty claims.
For further assistance, you may visit the official WOLTU brand store: WOLTU Mağazası