tp-link Deco AX1800 WiFi 6 Mesh System
Product Information
Specifications
- Manufacturer: TP-Link
- Model: Deco
- Compatibility: iOS and Android
- Connectivity: Wi-Fi or mobile data
LED Status
Each Deco device has an LED light that changes color according to its status. The following table explains the LED status:
| LED | DECO STATUS |
|---|---|
| Pulse Yellow | Deco is resetting. |
| Solid Yellow | Deco is starting up. |
| Pulse Blue | Deco is ready for setup. |
| Solid Blue | Deco is setting up. |
| Pulse White | Deco is upgrading firmware. |
| Solid White | Deco is all set up and connected to the internet. |
| Pulse Red | The satellite Deco is disconnected from the main Deco. |
| Solid Red | Deco has an issue. |
Product Usage Instructions
Step 1: Download and Login to the TP-Link Deco App
To get started, please ensure you are connected to the internet (Wi-Fi or mobile data) and follow the steps below:
- Download the TP-Link Deco app from the App Store (for iOS) or Google Play Store (for Android).
- Launch the app and log in using your TP-Link ID.
Step 2: Set up the Deco Router
The Deco Router is the main device that connects to your internet connection. Follow these steps to set it up:
- Locate the Deco labeled “Router”.
- Open the Deco app and follow the on-screen instructions to set up the Deco Router for your internet connection.
Step 3: Set up the Satellite Decos
Satellite Decos help extend the Wi-Fi coverage in your home. Follow these steps to set them up:
- Locate the Decos labeled “Satellite”.
- Once the Deco Router setup is complete, open the Deco app again and follow the on-screen instructions to set up the Satellite Decos for additional coverage.
Frequently Asked Questions (FAQ)
- Q: What should I do if the LED on my Deco is solid red?
A: If the LED on your Deco is solid red, it means there is an issue with the device. Try restarting the Deco and if the issue persists, please consult the troubleshooting section in the user manual or contact TP-Link support for further assistance. - Q: How do I know if my Deco is connected to the internet?
A: When the LED on your Deco is solid white, it indicates that the Deco is set up and connected to the internet. - Q: What should I do if my satellite Deco is disconnected from the main Deco?
A: If the LED on your satellite Deco is pulsing red, it means it is disconnected from the main Deco. Try moving the satellite Deco closer to the main Deco or follow the troubleshooting steps in the user manual to re-establish the connection.
Getting Started
Please remain online (Wi-Fi or mobile data) for Step 1.
- Download the TP-Link Deco app for iOS or Android and log in with your TP-Link ID.
- Find the Deco labeled “Router.” Follow the app to set it up first for your internet connection.
- Find the Decos labeled “Satellite.” Follow the app to set them up later for more coverage.
LED Status
Each Deco has an LED light that changes color according to its status. See the explanation below.
| LED | DECO STATUS |
| Pulse Yellow | Deco is resetting. |
| Solid Yellow | Deco is starting up. |
| Pulse Blue | Deco is ready for setup. |
| Solid Blue | Deco is setting up. |
| Pulse White | Deco is upgrading firmware. |
| Solid White | Deco is all set up and connected to internet. |
| Pulse Red | The satellite Deco is disconnected from main Deco. |
| Solid Red | Deco has an issue. |
Documents / Resources
 | tp-link Deco AX1800 WiFi 6 Mesh System [pdf] Instructions Deco AX1800 WiFi 6 Mesh System, Deco AX1800, WiFi 6 Mesh System, Mesh System, System |
