TOZO NC7 Hybrid Active Noise Cancelling Wireless Earbuds Instruction Manual
TOZO NC7 Hybrid Active Noise Cancelling Wireless Earbuds

Product description

Product description

Wearing Steps

Step 1: Ensure the earbud tip facing downwards, then place earbuds into ear.
Step 2: Rotate earbuds back to auricle side to fit snugly.

Wearing Steps

Wearing Steps

Operation of earbuds

How to pair

  1. Take out the 2 earbuds from charging case, they will power on automatically and will connect each other automatically within 10 seconds.
  2. The two earbuds flash red and blue alternately.( Pairing Mode
  3. Search for pairing name (TOZO NC7) and select it .

Operation of earbuds

Poweron/off

Power on :

  1. Turn over the lid, the earbuds will turn on automatically.
  2. Press & hold both earbuds’ MFB Touch Pannel for over 3 seconds.

Power off :

  1. Put the earbuds back into the case and close the lid, the earbuds will power off automatically.
  2. When earbuds are not playing music, long press MFB Touch Pannel for 5 seconds to turn off.
  3. The earbuds will turn off automatically after it Is disconnected for more than 5 minutes.

Reset
In case only one earbud works or two earbuds cannot be connected, please consider to reset by following the below steps:

  1. Delete all TOZO•NC7 records on the phone, then turn off the Bluetooth.
  2. Holding both earbuds button for 5 seconds till red lights on to turn off earbuds.
  3. Holding the MFB Touch Pannel oneach of earbuds for another 5 secondstill blue light turn on and off,and then clicking the MFB Touch Pannel on each of earbuds twice quickly, the reset process will be done when the Purple light on for 1s, then two earbuds flash red and blue alternately.

Optical sensors
Automatically monitor whether the earphone is worn on the ear.The music will pause automatically once the earbuds (or one of earbuds) is took off; The music starts automatically when wearing the earbuds on.

NOTE: Simply tap to play music if you’ve paused music manually.

Switch between noise-control modes

Tap the left earbud’s MFB Touch Pannel to switch between the Active Noise Cancellation (ANC) & Transparency Mode.The ANC function are not available when using single earbud.

NOTE: If the electromagnetic interference signal is strong in your area, it may affect the Bluetooth connection, please reconnect it or change the place of use.

Switch between noise-control modes

Active Noise Cancellation Mode (ANC Node)
With Active Noise Cancellation, an outward-facing microphone detects external sounds, which your TOZO NC7 earbuds then counter with anti-noise, canceling the external sounds before you hear them. An inward-facing microphone listens inside your ear for unwanted internal sounds, which your TOZO NC7 earbuds also counter with anti-noise.

ANC

Transparency Mode
Transparency mode can enhance the voice frequency band and improve the perception of the surrounding sound, so you can hear what’s going on around you with out taking off the earbuds.

Active Noise Cancellation and Transparency mode work best when your TOZO NC7 fit well and wearing correctly.

Transparency Mode

BOX Wireless Charging (Wireless charger is not included)

Designed for the modern life, never be strangled by headphone cables.

BOX Wireless Charging
Place the charging case vertically for wireless charging

Detailed Function List

Turn on

  1. Manually Turn On: After the earbud is in close status, tap and hold the touch control for 3 seconds and release it the blue light will turn on.Then looking for the phone with the last connect connection memory within 105 after the headset is turned on. lf it is not found, enter the pairing state (the red and blue lights flash alternately).
  2. Auto Turn On: When the earbuds are in the charging case, you can pick it up and it will automatically turn on. Then finding the phone with the last connect connection memory within 10s after the earbud is turned on. If it is not found, enter the pairing state ( the red and blue lights flash alternately ).

Turn off

  1. Manually Turn Off: Tap the MFB touch pannel 5 seconds for turn off in not playing status, and then release it, the red light will turn off after one second.
  2. Auto Turn Off: Put the earbuds back into the case and close the lid, then the earbuds will power off automatically.

Phone Pairing
When the earbuds are turned off. tap and hold the MFB touch pannel simultaneously for 5 econds and release them to pairing mode (the red blue light flashes alternately), then searching for pairing name”TOZO-NC7″ and select it in your mobile phone.

  1. Take out the 2 earbud from charging base, they will power on automatically and will connect each other automatically within 10 seconds.
  2. The two earbuds flash red and blue alternately (Pairing mode)
  3. Search for pairing name”TOZO-NC7″ and select it In your mobile phone.

Auto Turn Off
Automatically Turn Off after no connection for more than 5 minutes. Auto Turn Off After the earbud is disconnected from the phone at a long distance, it will automatically turn off after more than 5 minutes.(Normal mode)

Restore Factory Settings
In case reset step not reslove your issue, please restore to factory setting:

  1. Pick up two earbuds from charging case. then holding both earbuds button for 5 seconds till red lights on to turn off earbuds.
  2. Holding the MFB Touch Panne! on each of earbuds for 5 seconds till blue light turn on and off, and then clicking the MFB Touch Pannel on each of earbuds 3 times quickly, the Restore Factory Settings process will be done when the redlight.
  3. Put earbuds into charging case, and then take them out to connect records of “TOZO-NC7” on your phone.

Icons NOTE:
After Restore Factory Settings successfully, please delete all connection records of “TOZO-NC7” on your phone, then research again.

Turn on for re-connection

  1. Tap the MFB touch pannel for 3 seconds and release to turn on the earbuds—wait for a few seconds for the earbuds to automatically interconnect with each other — wait for a few seconds for the earbuds to connect with the paired phone — the connection is successful.
  2. Take out the earbuds from charging case—wait for a few seconds for the earbuds to automatically interconnect with each other —wait for a few seconds for the earbuds to connect with the paired phone — the connection is successful.

Over distance for re-connection
After the earbud is disconnected from the phone at a long distance, it can automatically reconnect when It returns to the close distance with the phone within 5 minutes. More than 5 minutes, the headset will automatically turn off.

Answer Phone Call
Tap the MFB touch panne! once to answer the incoming call.

Hang up Phone Call
Tap and hold the MFB touch pannel for 2 seconds to hand up the phone.

Reject Incoming Call
Tap and hold the MFB touch pannel for 2 seconds to reject the incoming call.

Cancel dialing
Tap and hold the MFB touch panne! for 2 seconds to cancel dialing before dialing out and the other party fails to answer.

Play/Pause
When playing music, tap the Right MFB touch pannel once to pause/play (The left headset cannot switch to play/pause).

Next Track
Double Tap the Right MFB touch pannel twice for backward when playing music.

Previous Track
Double-Tap the Left MFB touch pannel twice for previous when playing music.

Volume up
Tap and hold the MFB touch pannel on Right earbud when playing music.

Volume down
Tap and hold the MFB touch pannel on Left earbud when playing music.

Voice interaction of Siri
In standby mode, quickly tap the MFB touch pannel 3 times to turn on voice interaction of mobile phone.

Primary / Secondary switch automatically ail
When listening to music, put either headset back into the charging case, and the other headset will not be affected.

Function List

Left earbud

Turn On Pick up the earbuds from the case it will turn on automatically.
Tap the MFB Touch Pannel for 3 seconds to turn on.
Turn Off Put back into the charging case, it will turn off & charge automatically.
Tap the MFB Touch Pannel for 5 seconds to turn off when not playing.
Automatically turn off after no conncetion for more than 5 minutes.
Previous Track Tap the MFB Touch Pannel to play backward.
Volume down Tap and hold the MFB Touch Pannel to reduce volume.
ANC Mode Tap the MFB Touch Pannel Once.
Transparent mode Tap the MFB Touch Pannel Once.
Answer Phone Call Tap the MFB Touch Pannel Once.
Hang up Phone Call Long press the MFB Touch Pannel for 2 seconds.
Reject incoming Call Long press the MFB Touch Pannel for 2 seconds.
Cancel! Phone Call Long press the MFB Touch Panne! for 2 seconds.

Right earbuds

Turn On Pick up the earbuds from the case it will turn on automatically.
Tap the MFB Touch Pannel for 3 seconds to turn on.
Turn Off Put back into the charging case, it will turn off & charge automatically.
Tap the MFB Touch Pannel for 5 seconds to turn off when not playing. Automatically turn off after no conncetion for more than 5 minutes.
Next Track Tap the MFB Touch Pannel twice to play backward.
Volume up Tap and hold the MFB Touch Pannel to increase volume.
Play/Pause Tap the MFB Touch Pannel Once.
Answer Phone Call Tap the MFB Touch Pannel Once.
Hang up Phone Call Long press the MFB Touch Pannel for 2 seconds.
Reject Incoming Call Long press the MFB Touch Pannel for 2 seconds.
Cancel Phone Call Long press the MFB Touch Pannel for 2 seconds.

SPECIAL REMINDER:

Wipe the hardware contacts of the headset and charging box when the headset is not charging.

Icons Note:
If your problem is not answered above, please contact us via email, we will respond within 24 hours.

Icons Email: [email protected]

IconsBattery Warning!
This product has built-in lithium battery. Do not expose the product to strong sunlight fire or throw it into the fire to avoid explosion.

QR Code
[email protected]

QR Code
www.tozostore.com

Thank you for purchasing the TOZO authentic product.
For more latest products, parts and accessories,
please visit: www.tozostore.com
For any assistance please contact Email: [email protected]

Icons

Documents / Resources

TOZO NC7 Hybrid Active Noise Cancelling Wireless Earbuds [pdf] Instruction Manual
NC7, Hybrid Active Noise Cancelling Wireless Earbuds, NC7 Hybrid Active Noise Cancelling Wireless Earbuds