How to configure port forwarding？
Application introduction: By port forwarding, the data for Internet applications can pass through the firewall of the router or gateway. This article will show you how to forward ports on your router.
STEP-1: Connect your computer to the router
1-1. Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.1.1 into the address bar of your browser.
Note: The default IP address of TOTOLINK router is 192.168.1.1, the default Subnet Mask is 255.255.255.0. If you can’t log in, Please restore factory settings.
1-2. Please click Setup Tool icon 
to enter the router’s setting interface.
1-3. Please login to the Web Setup interface (the default user name and password is admin).
STEP-2:
Click Advanced Setup->NAT/Routing->Port Forwarding on the navigation bar on the left.
STEP-3:
Choose the Rule Type from the drop-down list, and then fill in the blank as below, and then click Add.
–Rule Type: User defined
–Rule Name: Set a name for rule (e.g. toto)
–Protocol: Selectable by TCP, UDP, TCP/ UDP
–External Port: open the external port
–Internal Port: open the internal port
STEP-4:
After last step, you can see the rule’s information and manage it.
DOWNLOAD
How to configure port forwarding – [Download PDF]
