GARDENA smart SILENO free Quick Guide

What's in your box

Robotic lawn mower
Charging station baseplate
Charging top & charging module
Power supply & low-voltage cable
Screws & allen key to attach the charging station
GARDENA smart Gateway, LAN-cable & power supply
Installation aid

What else you need

Mobile device: Use the app to control and make settings for your robotic lawn mower.

Getting started with the GARDENA robotic lawn mower

For more information, read the operator's manual supplied with the product.

Before the installation

For an easy installation make sure that the grass is not higher than 4 cm when you install the robotic lawn mower. Good to know: The robotic lawn mower is rainproof and does not need a garage or other shelter.

Criteria for placing the charging station:

On level ground.
Near an electrical outlet.
Obstacle-free 6 m space in front of the charging station.
The docking point will be placed in front of the charging station and needs to have unimpeded sky view.

To connect the charging station

Connect the charging station baseplate to the charging station top.
Connect the charging station to the power supply.
Push the On/Off button for 3 seconds to set the robotic lawn mower to ON and to charge the battery.

To download and pair with the GARDENA smart system App

Install the GARDENA smart Gateway and read the instruction for the GARDENA smart system.
Use the QR code or visit your app store to download the GARDENA smart system App.
Open the app and register as a user.
Select "Include product" on the overview page in the app.
Push the On/Off button for 3 seconds to set the robotic lawn mower to ON.
Enter the factory PIN code 1234 with the keypad on the robotic lawn mower.
Push the Connectivity button on the robotic lawn mower to enable the pairing operation mode.
Follow the instructions and enter the factory pin code 1234. Change to a new pin code in the app's settings.

System description

The system contains a robotic lawn mower, a charging station and the GARDENA smart Gateway. For installation of virtual boundaries, the product uses satellites and correction data to navigate. The correction data is received through the GARDENA smart Gateway. To make an installation the product is operated with Remote control in the GARDENA smart system App. Waypoints are added to make a map in the app. The virtual boundary is installed around an area to specify where the product can operate. The product only cuts grass in the mowing areas. The No-go zones are areas where the product cannot enter. The product uses the docking point in front of the charging station to navigate to and from the charging station.

Connectivity overview

A diagram showing the layout of a garden with the robotic lawn mower system components:

1. Virtual boundary
2. No-go zones
3. Mowing areas
4. Robotic lawn mower
5. Charging station
6. Docking point

Operating modes for the robotic lawn mower and LED status lights

Start the robotic lawn mower with the app or use the On/Off button and enter the PIN code on the robotic lawn mower. Push the Start button and then the OK button. Push the STOP button to stop the robotic lawn mower. There are 4 light modes on the LED indicator: the light flashes quickly (A), the light is solid (B), the light is out (C), and the light pulsates (D).

While the robotic mower is parked, you may set it to idle and select a different operating mode by pushing the STOP button.

Operating Modes:

Standby.
Waiting for PIN code.
Cutting according to the set Schedule or in operating mode Override schedule.
Cutting, in operating mode SpotCut.
The product operates remotely by the app.
Error.
Error after 3 minutes.
Charging.
Parked until the next schedule or Parked until further notice.

	GARDENA SILENO minimo Robotic Lawn Mower Quick Guide A quick guide to getting started with the GARDENA SILENO minimo robotic lawn mower, covering installation of the charging station, boundary wire, guide wire, and basic operation.
	GARDENA smart system Quickstart Guide: Installation and App Integration Get started with your GARDENA smart system. This quickstart guide provides essential information on installation, integrating your robotic mower with the GARDENA smart system app, product disposal, and battery replacement. Includes CE Declaration of Conformity.
	GARDENA SILENO city / smart SILENO city Robotic Lawn Mower Quick Start Guide Quick start guide for setting up and operating the GARDENA SILENO city and smart SILENO city robotic lawn mowers, covering installation, wiring, and basic functions.
	GARDENA SILENO city & SILENO life Operator's Manual Comprehensive operator's manual for GARDENA SILENO city and SILENO life robotic lawn mowers, covering installation, operation, maintenance, safety, and troubleshooting.
	GARDENA SILENO+ & smart SILENO+ Operator's Manual: Robotic Lawn Mower Guide Comprehensive operator's manual for GARDENA SILENO+ and smart SILENO+ robotic lawn mowers. Covers installation, operation, safety, maintenance, and troubleshooting for efficient lawn care.
	GARDENA SILENO Robotic Lawnmowers: Smart Lawn Care Explore the GARDENA SILENO range of robotic lawnmowers, offering smart and effortless lawn care. Discover features like AI-PRECISE navigation, PRO-SILENT operation, and full connectivity with the GARDENA smart system and Bluetooth® app. Find the perfect model for your lawn size, from small to large areas.
	GARDENA SILENO City & Life Robotic Lawn Mower Quick Start Guide Get started quickly with your GARDENA SILENO city or SILENO life robotic lawn mower. This guide covers base station and wire installation, starting, stopping, and basic settings.
	GARDENA SILENO minimo Robotic Lawn Mower Quick Start Guide Concise guide to installing and starting your GARDENA SILENO minimo robotic lawn mower, covering charging station setup, boundary wire installation, guide wire connection, operation, and app pairing.