Instruction Manual for Automotion Plus models including: ES-SM450 Heavy Duty Surface Mount Electric Strike, ES-SM450, Heavy Duty Surface Mount Electric Strike, Surface Mount Electric Strike, Mount Electric Strike, Electric Strike

ES-SM450-UserManuel-Ydv02

yalcin

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 2 Pages, 103.87KB

Document Document

Heavy Duty Surface Mount Electric Strike (ES-SM450)
NO/NC Adjustable

Functions

· Surface mounted electric strike, no need to slot on door frame, easy to install; with door signal output
· Static strength rating of 450kg force · Solenoid valve has been tested 250,000 times
(UL laboratory) · More than 500,000 times aging test

· NC/NO adjustable (Adjustable Fail Safe or Fail Secure)
· Factory default: NC mode (Fail safe) · SS 304 stainless steel faceplate,
precision cast SS 304 high-strength strike keeper

Technical Parameters
D im en sio n s Keeper depth Keeper width Voltage Current Door signal output Installation method Application Applicable temperature Applicable humidity Material of housing Material of faceplate
Diagram (units mm)

L105 x W63 x H35 (mm) 12mm 50mm DC12V 12V /280m A (± 10% ) Door status signal output:NO/NC/COM contacts Surface mounted (use with mechanical locks) Wooden doors, metal doors, fire doors -20°C~+55°C ( -4-131 °F ) 0~95% relative humidity Zinc alloy (high temperature painted) SS 304 stainless steel (surface brushed)

Wiring Diagram

Red : + Black : -

DC 12V(Default)

Signal Output
Yellow: NC N.O. contact output closed status White: COM Common terminal Green: NO N.C. contact output : closed status

Conversion of NO and NC You can set the operation mode of Fail Safe or Fail Secure. Fail safe (NC mode): When power off, the door is in unlocked state Fail secure (NO mode): When power off, the door is in locked state
Remove screw 1 and loosen screw 2, slide screw 2 to the other end of the oblong hole, replace screw 1 to "Fail secure" position, conversion completed.

2

2

1

1

Fail Safe (NC)

Fail Secure (NO)

Tips: Please loosen and slide screw 2 carefully, do not take it out, otherwise it will cause the internal solenoid valve to fall off.