Magicshine Monteer 8000S V2.0 User Manual
Battery Features
The Monteer 8000S V2.0 features a high-capacity battery pack with 4x 21700 Li-ion cells (7.2V, 10Ah). It includes multiple circuit protections for safety and is housed in a fireproof PC material shell. The integrated Type-C interface supports 10W/18W fast charging and discharging.
Battery Indicator
When the light is off, press the power button to display the remaining power:
- FLASH RED: 0%-10%
- RED: 11%-30%
- GREEN: 31%-100%
Accessory/Structure
Included accessories:
- MONTEER 8000S V2.0 light unit
- M-REMOTE (remote control)
- Battery pack
- Handlebar mount
- USB-C Cable
- Nylon strap
- 3mm Hex wrench
How to Recharge
Connect the USB-C cable to the battery pack. Standard charging time is approximately 9.5 hours (5V 2A).
Charging status:
- Less than 30%: Red indicator
- Less than 70%: Yellow/Orange indicator
- 100% / Fully Charged: Green indicator
Switching the Lighting Mode
Power On/Off: Long press the power button.
The light remembers the last used mode (mode memory function).
Changing Modes:
- Single click: Cycle through brightness levels (ECO, LOW, MID, HIGH).
- Double click: Activate FLASH mode.
- Double click again: Return to previous mode.
A single click while the light is on also shows the battery indicator status.
How to Install Battery Pack
Follow these steps:
- Disconnect the lighthead from the battery.
- Connect the battery pack to the light unit.
- Secure the battery pack using the provided strap or mount.
- Connect USB-C cable for charging if needed.
- Ensure all connections are secure.
Lumens/Run Time
| MODE | BRIGHTNESS | ECO | LOW | MID | HIGH | FLASH |
|---|---|---|---|---|---|---|
| LUMENS | 400 | 900 | 1700 | 3200 | 0-900 | |
| h:min | 32:00 | 15:00 | 09:00 | 04:00 | 16:00 | |
| LUMENS | 600 | 1400 | 2600 | 4800 | 0-1400 | |
| h:min | 22:00 | 11:00 | 05:30 | 02:10 | 11:30 | |
| LUMENS | 1000 | 2400 | 4400 | 8000 | 0-2400 | |
| h:min | 12:00 | 06:30 | 03:25 | 01:30 | 07:00 |
How to Pair M-REMOTE
Pairing steps:
- Disconnect the lighthead from the battery.
- Press and hold both M-REMOTE buttons until the indicator light flashes.
- Reconnect the lighthead to the battery.
- Pairing is successful if the lighthead flashes once or the remote indicator stops flashing.
Note: The M-REMOTE pairs with only one device. Repeat steps to pair with a new device.
How to Use the M-REMOTE
Mode selection button:
- Long press: Turn on/off.
- Press: Activate max output.
- Double press: Change mode.
Brightness selection button:
- Long press: Turn on/off.
- Press: Change brightness.
- Double press: Activate flash mode.
Optional Parts
Additional mounting accessories (sold separately):
- Helmet mount
- TTA front mount
Warranty Information
The Magicshine lighting system has a 24-month warranty from purchase date. Registering on the Magicshine website adds 6 months. Battery packs and AC adapters have a 6-month warranty.
Warranty covers material and workmanship defects. It is void if tampered with or intentionally damaged. Proof of purchase is required.
For claims, contact the retailer or Magicshine:
- Tel: (+86) 755-295 536 69
- Fax: (+86) 755-275 897 77
- Email (online orders): support@magicshine.com
- Email (other channels): service@magicshine.com
Magicshine reserves the right to make technical modifications. Replacement devices will be of the same or equivalent model available at the time of replacement.
ANSI FL 1 Standard Compliance
- Light Output: 8000 Lumens
- Beam Distance: 315 meters
- Peak Beam Intensity: 25000 candela
- Impact Resistance: 1 meter
- Water Resistant: [Water resistant rating not specified]
The product is CE and RoHS compliant.
