P27 Qi2 Magnetic Wireless Power Bank

Product Indication

This manual provides information for the P27 Qi2 Magnetic Wireless Power Bank.

Key Features:

• Wireless charging of mobile phone: 15W Max
• Compatible with Smart Phones with MagSafe or Magnetic Case
• Features a metal bracket
• 20W Max Input/Output

Operating Instructions

Power Display: Press once to turn ON and display LED power. Press twice to turn OFF.

Magnetic Charging Compatibility:

• For phones that do not natively support magnetic charging, use a magnetic case or attach a magnetic ring.
• Ensure the magnetic case or ring is aligned with the phone's charging receiver to avoid charging issues or overheating.

Note: Magnets may affect credit cards and metal cases.

Specifications

• Battery Capacity: 5000mAh (3.85V/19.25Wh)
• Input: 5V 3A, 9V 2.22A, 12V 1.65A (20W Max)
• Output Wireless: 15W Max
• Type C Output: 5V 3A, 9V 2.22A, 12V 1.65A (20W Max)

Compatible Devices

Mobile Phones:

• iPhone 12 / 12 mini / 12 Pro / 12 Pro Max
• iPhone 13 / 13 mini / 13 Pro / 13 Pro Max
• iPhone 14 / 14 Plus / 14 Pro / 14 Pro Max
• iPhone 15 / 15 Plus / 15 Pro / 15 Pro Max
• iPhone 16 / 16 Plus / 16 Pro / 16 Pro Max

Please use a magnetic case to charge your phone.

Other Devices:

• AirPods Pro 2nd Generation
• AirPods 4 / AirPods 3
• AirPods Pro (MagSafe compatible)
• AirPods Pro
• AirPods 2nd Generation
• All devices that support C port charging

Important Safety Instructions

• Disconnect the device from power before cleaning.
• A humming noise during charging is normal and indicates efficient temperature adjustment for optimal charging speed.
• If charging is incomplete, high environmental temperatures may be a factor. Allow the device to cool before recharging. The charger has built-in temperature control for device safety.
• Avoid storing the device in high-temperature environments, including direct sunlight or other heat sources.
• Do not expose the device to fire or excessively hot environments (temperatures above 100°C / 212°F may cause explosion).
• Do not use the wireless charger beyond its output rating to avoid fire or injury risks.
• Do not expose the wireless charger to rain or snow.
• Do not modify, repair, or disassemble the unit. Contact the manufacturer for assistance.
• Switch off the wireless charger when not in use. It will automatically switch off when disconnected from its power source.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Exposure Statement: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.