Instruction Manual for HORNETPRO models including: DS-HORNETPRO-5 FM Remote Control, DS-HORNETPRO-5, FM Remote Control, Remote Control, Control
HORNETPRO DS-HORNETPRO-5 Features: • Up to 150m Range • 868MHz FM Technology • Outputs Momentary or Latching • Any Switch Map to Any Relay • Systems supplied ’ready to Go’ • Maximum 30 Button Pairings • Waterproof Receiver (IP68) • High Security RF Protocol • CE Compliant Low Voltage Receiver (6-32Vdc/ac) • 4 Changeover Relays Contacts
RF Receiver, Transmitter, and Transceiver Finished Units | Electronic Components Distributor DigiKey
HORNETPRO-8S2 | RF and Wireless-RF Receiver, Transmitter, and Transceiver Finished Units -acme-chip.com | Acme Chip
HORNETPRO FM Remote Control Features: · Up to 150m Range · 868MHz FM Technology · Outputs Momentary or Latching · Any Switch Map to Any Relay · Systems supplied 'ready to Go' · Maximum 30 Button Pairings · Waterproof Receiver (IP68) · High Security RF Protocol · CE Compliant Low Voltage Receiver (6-32Vdc/ac) · 4 Changeover Relays Contacts Rated 5A @ 230Vac High Voltage Receiver (230Vac) · 2 Changeover Relays Contacts Rated 5A @ 230Vac, or, High Voltage Receiver (230Vac) · 1 Channel Direct 230Vac output Rated 20A (N/O only) Intended Use · Commercial/Industrial Remote Control · Electric Gates · Roller Shutter Doors · Garden Lighting, Sports Grounds Description A versatile Remote Control System for many different applications. Housed in a rugged IP68 weatherproof enclosure, HORNETPRO is available as either low voltage powered 4 changeover relays, mains powered receiver with 2 changeover relays, or a single direct 230Vac switching output. Installation is by screw terminals to the power supply and the output relay contacts. Outputs are activated by the button press on the remote transmitter. Remote Transmitters may be added to a receiver using the same `easy-learn' process without opening the enclosure. DS-HORNETPRO-5 HORNETPRO Complete Systems Part Numbers (Transmitter and Receiver) Part Number HORNETPRO-8S1 HORNETPRO-8S2 HORNETPRO-8S3 HORNETPRO-8S4 Description 1 channel System 2 channel System 3 channel System 4 channel System Power Supply 6-32Vac/dc Part Number HORNETPRO-8S1M HORNETPRO-8S2M Description 1 channel System 2 channel System Power Supply 230Vac Remote Transmitter Part Numbers Receivers Part Numbers Part Number FOBBER-8T1 FOBBER-8T2 FOBBER-8T3 FOBBER-8T4 FOBBER-8T6 FOBBER-8T8 FOBBER-8TL1 FOBBER-8TL2 Description 1 Sw 2 Sw 3Sw 4 Sw 4 ch 6 Sw 8 Sw 2 button 1ch ON/OFF 4 button 2ch ON/OFF Part Number HORNETPRO-8R4 HORNETPRO-8R2M HORNETPRO-8R1M20A Description 4ch Receiver 2ch Receiver 5A Relays 1ch Receiver O/P 230V@20A Power Supply 6-32Vdc 230Vac 230Vac DS-HORNETPRO-5 HORNETPRO Technical specifications Transmitters: FOBBER Transmitter Enclosure Rating: Standard IP68 Battery Type: CR2032 (supplied) Battery Life: 2 years @ approx. 50 1/2second presses p/day Dimensions: 59 x 33 x 9 mm Electrical Characteristics Min Typical Supply Voltage 2.9 3 Supply Current 17 Frequency: 869.50 RF Output Power (ERP) - RF Bandwidth 60 Max 3.3 10 Units V mA MHz mW KHz Receiver Unit Enclosure Rating: Dimensions: Operating Temperature: IP68 130 x 112 x 42 mm (not including antenna) -10 to +50o Celsius. Electrical Characteristics MIN TYPICAL MAX DIMENSION Supply Voltage for Low Voltage version Supply Voltage for high Voltage version Relay Rating* HORNETPRO-8R4 HORNETPRO-8R2M HORNETPRO-8R1M20A Supply Current : Quiescent All (4) relays operating* 6 32 Vdc or ac 230 Vac 5 12 5 12 A 20 30 25 140 mA Time delay from Tx on Switch to Rx Relay operation 30 mS Time delay from Tx sw relax to Rx Relay release 30 mS *The relay contacts in this unit are for functional use only and must not be used for isolation purposes Custom Systems Fobber keyfobs can be customised with logo, colour or complete custom plastic housing for unique Branding. Please contact Sales for further info. DS-HORNETPRO-5 HORNETPRO Mechanical Dimensions All Dimensions in mm 50.00 3 x slots 4.5 x 13mm 80 76 4 100 96 20 46.00 59.00 10.00 Image shows HORNETPRO-8R4 82.00 Measurements in mm drawing not to scale RF Solutions Ltd. Recycling Notice Waste Batteries and Accumulators Directive Meets the following EC Directives: 2006/66/EC DO NOT Where the batteries are fitted, before recycling Discard with normal waste, please recycle. the product, the batteries must be removed ROHS Directive 2011/65/EU and amendment 2015/863/EU and disposed of at a licensed collection point. Specifies certain limits for hazardous substances. RF Solutions battery producer number WEEE Directive 2012/19/EU BPRN00060. Waste electrical & electronic equipment. This product must be disposed of through a licensed WEEE collection point. RF Solutions Ltd., fulfils its WEEE obligations by membership of an approved compliance scheme. Environment agency registration number WEE/JB0104WV Disclaimer: Whilst the information in this document is believed to be correct at the time of issue, RF Solutions Ltd does not accept any liability whatsoever for its accuracy, adequacy or completeness. No express or implied warranty or representation is given relating to the information contained in this document. RF Solutions Ltd reserves the right to make changes and improvements to the product(s) described herein without notice. Buyers and other users should determine for themselves the suitability of any such information or products for their own particular requirements or specification(s). RF Solutions Ltd shall not be liable for any loss or damage caused as a result of user's own determination of how to deploy or use R F Solutions Ltd's products. Use of RF Solutions Ltd products or components in life support and/or safety applications is not authorised except with express written approval. No licences are created, implicitly or otherwise, under any of RF Solutions Ltd's intel lectual property rights. Liability for loss or damage resulting or caused by reliance on the information contained herein or from the use of t he product (including liability resulting from negligence or where RF Solutions Ltd was aware of the possibility of such loss or damage arising) is excluded. This will not operate to Limit or restrict RF Solutions Ltd's liability for death or personal injury resulting from its negligence.Microsoft Publisher for Microsoft 365