Home - CDVI Group
One moment, please...
User Guide for CDVI models including: A6U49, A6U49 Mid and Long Range UHF Reader, Mid and Long Range UHF Reader, Long Range UHF Reader, Range UHF Reader, UHF Reader, Reader
RECEPTOR / ANTENA UHF 6 METROS | ADISES
File Info : application/pdf, 24 Pages, 1.51MB
DocumentDocumentA6 U4 9 / A1 0 U4 9
Mid & Long- Range UHF Reader
Wireless Signal with
AES128 ENCRYPTION
www.cdvigroup.com
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
Thank you for purchasing our products and for the confidence you placed in CDVI.
1 ] PROD UCT PRESEN TATI ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 ] PACKAGE CON TEN TS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 ] M OUN TI N G I N STRUCTI ON S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 A6U49 m ount ing DI AGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 A10U49 m ount ing DI AGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 RF m odule m ount ing DI AGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4] W I RI NG DI AGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Side I nstallation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Over- Head I nst allat ion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5] PROGRAMMI NG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 1. Set the operating m ode ( output) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2. Adding UHF credent ial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 3. Delet ing UHF credent ial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 4. Adding Rem ot e ( Tx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 5. Delet ing Rem ot e ( Tx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6. Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 7. Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 8. Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 9. Opt ion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 10. Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 11. UHF Credent ial I nst allat ion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 12. Parking or Garage Applicat ion Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 13. Using and I nst alling UHF Credent ial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 14. Wiegand Out put Form at s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
W ARRAN TY AN D D ECLARATI ON OF CON FORM I TY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 3
Copyright ( C) 2019 CDVI . All right s reserved. ATRI UM Access Cont rol is prot ect ed by copyright law and int ernat ional t reat ies. Unaut horized reproduct ion or dist ribut ion of t his product , or any port ion of it , m ay result in severe civil and crim inal penalt ies, and will be prosecuted to the m axim um extent possible under law.
All other brand and product nam es are tradem arks or registered tradem arks of their respective com panies.
The inform at ion cont ained in t his publicat ion is subj ect t o change wit hout not ice.
2
cd v ig r ou p. com
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
1 ] PROD UCT PRESEN TATI ON
U4GO is a high-performance UHF (902-928 MHz) integrated system perfect for vehicle and people identification. There are two operating modes, standalone or Wiegand output. The U4GO system provides secure access for many applications such parking facility, gated community, campus and rolling stock. The U4GO readers are easy to install, versatile, and perfectly suited for access control systems (Wiegand output). The high security protocol (AES128) RF module can also manage up to 100 remote controls.
RF Module
· Works in t wo operat ing m odes, st and- alone ( relay act ivat ion) or Wiegand out put ( online access cont rol)
· St a nd- a lone m ode: Manage up t o 7560 UHF credent ials and 100 rem ot e keys
· W iegand m ode ( 2 6 - , 3 0 - or 4 4 - bit supported) :
Maxim um UHF credent ials and rem ot es m anagem ent depends on the capacity of the access control system
· Relay operat ing m odes ( 2 x 24 VA - 48 VDC rat ed relays) : Pulse, step, delayed (delay from 1 sec. to 23h:59min)
· Operat ing frequency range 433 MHz ( Rolling code whit AES128 encrypt ion)
4.85" (123 mm)
RXU4GO CDVI
· RS485 wiring bet ween t he UHF reader and RF m odule ( Two UHF readers support ed per RS485 port )
· Power requirem ent s: 12 VDC ( Universal 120V/ 240V plug- in power supply included)
· Current consum pt ion: 25 t o 50 m A ( m ax) @ 12 VDC · Operat ing t em perat ure: 14° F t o 140° F ( - 10° C t o 60° C)
3.21" (81,5 mm)
1.63" (41,5 mm)
· Weight: 0.15 lbs (65 g)
· I P55 enclosure prot ect ion
· Dem odulat ion GFSK
· Sensitivity ( for good signal) : - 115 dBm
UHF Readers
Wireless Signal with
AES128
ENCRYPTION
· Operat ing frequency range of 902 - 928 MHz · Detection range in open space:
A6U49: 20 ft ( 6 m ) and A10U49: 33 ft ( 10 m ) · Vehicle m oving speed: 50 m ph ( 80 Km / h) · Current consumption: 350 mA (max. 650 mA) · Operat ing t em perat ure: - 13° F t o 176° F ( - 25° C t o 80° C) · Weight: A6U49: 2 lbs (0.9 Kg) and A10U49: 5.3 lbs (2,4 Kg) · Prot ocol t ag support ed: I SO18000- 6B, I SO18000- 6C, EPC C1G2 · Transm ission t ype: FHSS · Dimensions: A6U49: 9.25 x 9.25 x 2.25 in (235 x 235 x 57 mm)
A10U49:17.5 x 17.5 x 2.15 in (445 x 445x 55 mm)
A1 0 U4 9 A6 U4 9
cd v ig r ou p. com
3
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
3 ] PACKAGE CON TEN TS
This chapt er det ails how t o inst all and set up t he U4GO A6U49 or A10U49.
The box cont ains: · One A6U49 or A10U49 ant enna · Universal power supply wit h AC power cord plug · Wireless Receiver · Fixing Bracket
Fixing bracket
Reader with power supply
Compatible UHF credential
P/N
Description
ATU48 ADHESIVE TAG U4GO
I/F with built-in receiver
Image
Suitable way Stick on the surface of windshield
CTU48 CARD TAG U4GO
PTU48
LICENSE PLATE TAG U4GO
1) Fixed with card holder 2) Handheld by user
Fix on the surface of license plate
cd v ig r ou p. com
4
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
4 ] M OUN TI N G I N STRUCTI ON S
A6 U49
MOUNTI NG DI AGRAM
Mounting pole
(Not included)
U-shaped bracket and counter-plate bracket
Fixing screws & nuts
RF Reader L-shaped bracket
5
cd v ig r ou p. com
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
A10 U49
MOUNTI NG DI AGRAM
RF Reader
Mounting bracket
Mounting pole
(Not included)
7.25 ft (2,2 M)
cd v ig r ou p. com
6
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
RF MODULE
MOUNTI NG DI AGRAM
Option A)
R4GXOU-128
2) Fix the support to the place where the RF module will be installed using the provided screws and anchors.
1) Make a hole at the bottom of the enclosure for the passage of the wires
Option B)
RXU4GO128
Use of PG7 cable glands (not provided)
7
cd v ig r ou p. com
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
5 ] W I RI NG DI AGRAM
Reader 1
Buzzer
Backlit LCD Display
CDVI U4Go
P1 P2 P3 P4
RS485 BUS
Orange
Purple Black Red
A
B GND 12 VDC
Optional Reader 2
Orange
Purple Black Red
A
B GND 12 VDC
Connector for backup memory
Pull-Up Wiegand
J2 ON = 9V J2 OFF = 5V
RG58
Optional Antenna (SEA433)
Relay #2 Relay #1
Wiegand BUS
D1 D0 GND
Access Cont rol Syst em
Description
RS485 BUS Wiegand BUS Power supply
12 VDC Universal plug-in power supply included (120V/240V)
NOTE: Indoor installations only.
Wire type 2 conductors (RS485 bus) 2 conductors (Power supply)
Optional extension size 24AWG (0.51 mm2 ) 18AWG (1.02 mm2 )
3 conductors Belden 9553
22AWG (0.64 mm2 ) to 18AWG (1.02 mm2 )
2 conductors
18AWG (1.02 mm2 )
Maximum length 1220 m L1= 32 m MAX 150 m
L1= 32 m MAX
8
cd v ig r ou p. com
Side I nstallation
Barrier
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
Ticket box
Reader Pole
Barrier
Control room
Over- Head I nstallation
Ticket box
Reader
Holder for overhead installation Barrier
cd v ig r ou p. com
9
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
6] PROGRAMMI NG
Menu Commands:
Press "P1" to scroll up Press "P2" to scroll down
CDVI U4Go
P1 P2 P3 P4
Press "P3" for 4 sec. to enter in programming mode or press once to confirm a selection
Press "P4" to exit
U4 GO Menus
RXU4Go CDVI
Menu Output
Menu Exit
Menu Add Tag
Menu Info
Menu Del Tag
Menu Option
Menu Add Tx
Menu Backup
Menu Del Tx
Menu Config
Menu Settings
The next steps explain in detail the different menus and their configurations.
1 . Set the operating m ode ( output)
Scroll to the "menu Output" then press "P3 "
menu Out pu t
The U4GO system work in two different operating mode "Output":
"RELAY" m ode ( st and- alone) : Manage up to 7560 UHF credentials and 100 remote keys in stand-alone (relay activation ONLY).
"W I EGAN D" m ode ( Conne ct t o online a cce ss cont r ol syst e m ) : Maximum UHF credentials and remotes management depends on the capacity of the access control system.
Select one then press "P3 " to confirm
I M PORTAN T: The relays will not work in "Wiegand" mode
10 cdvigroup.com
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
2 . Adding UHF credential
There are two ways to register a UHF credential:
· One at a time · In one block (batch).
2.1 Adding UHF credential one at a time
Scroll to the "Add Tag" menu then press "P3 "
menu A dd T ag
Press "P3 " again Add T ag
Wa i t Tag 0 000 0000
Present the UHF credential to the reader or type manually its serial number (Note: use "P4 " to shift left).
2.2 Add UHF credential in one block
You can also register multiple UHF credentials in one block. The serial numbers of each UHF credentials must follow each other in series. Simply confirm the number of UHF credentials to register and then present the first one in the series.
Scroll to the "Add Tag" menu then press "P3 "
menu A dd T ag
Scroll to "Add Tag Block", then press "P3 "
A dd T ag B loc k
H ow many T a g ? 000
1 0 0 T ag?
No
Yes
Wa i t Tag 0 000 0000
Type the number of UHF credential to register
Press "P1 " t o select t hen "P3 " to confirm
Present the first UHF credential of the series to the reader or type manually its serial number (Note: use "P4 " to shift left).
If you have 2 antennas on the same RF module, the same UHF tag will have to be added twice. Once added while being read by antenna # 1 and another time added while being read by antenna # 2.
cdvigroup.com 11
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
3 . Deleting UHF credential
3.1 Delete UHF credential one at a time
Scroll until "menu Del Tag" then press "P3 "
menu De l Tag
Scroll until "Delete Tag" then press "P3 "
De l e t e Tag
Present the UHF credential to the reader or type manually its serial number (Note: use "P4 " to shift left).
Wa i t Tag 0 000 0000
C o n f i r m ? Press "P1 " t o select
No
Y e s t hen "P3 " to confirm
3.2 Delete UHF credential in one block
You can also delete multiple UHF credentials in one block (batch). The serial numbers of each UHF credentials must follow each other in series. Simply confirm the number of UHF credentials to register and then present the first one in the series.
Scroll until "menu Del Tag" then press "P3 "
menu De l Tag
Scroll until "Delete Block" then press "P3 "
De l e t e Bl o ck
Wa i t Tag 0 000 0000
Present the first UHF credential of the series to the reader or type manually its serial number (Note: use "P4 " to shift left).
H ow many T a g ? 000
Type the number of UHF credential to delete
1 0 0 T ag?
No
Yes
Press "P1 " t o select t hen "P3 " to confirm
3.3 Delete remote from the list
This is useful when you do not have the remote control in your hand but only its serial number from a list.
Scroll until "menu Del Tx" then press "P3 "
menu Del Tx
Scroll until "Delete Tx" then press "P3 "
Dele te by Li st
Scroll until you find the serial number (red rectangle). Then press "P3 " to select.
Pos :0005 0 000 0 123
Press "P1 " to select, then press "P3 " to confirm.
C o n f i rm?
No
Yes
3.4 Delete ALL UHF credential at once
Scroll until "menu Del Tag" then press "P3 "
menu De l Tag
Scroll until "Delete All Tags" then press "P3 "
De l e t e A l l Tags
Press "P1 " t o select t hen "P3 " to confirm
C o n f i rm?
No
Yes
12 cdvigroup.com
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
4 . Adding Rem ote ( Tx)
The "Add Tx" menu is required in "Relay" mode ONLY. See "1 . Se t t h e ope r a t in g m ode ( ou t pu t ) ". You can add up to 100 remote controls. A remote control can activate either relay 1 or relay 2.
There are three ways to register a remote (Tx): one at a time, by associating a button to a specific relay or in one block (batch).
4.1 Add remote one at the time
Scroll until "menu Add Tx" then press "P3 "
Scroll until "Add Tx" then press "P3 "
Press any button of the remote or type manually its serial number. The serial number is printed in the back of the remote. (Note: use "P4 " to shift left).
menu A dd T x
A dd T x
Wa i t Tx 0 000 0000
Button A
Button A Button C
Once added, the button A will be associated to relay #1 and button B to relay #2
Button B
Button D Button B
4.2 Add remote and associate a button to a specific relay ("Relay" output mode ONLY)
Scroll until "menu Add Tx" then press "P3 "
menu A dd T x
Scroll until "Add to Relay 1" or "Add to Relay 2" then press "P3 "
A dd t o R el ay 1
A dd t o R el ay 2
Wa i t Tx 0 000 0000
Press the button you want to associate with the previously selected relay. or type manually its serial number. The serial number is printed on the back of the remote. (Note: use "P4 " to shift left).
4.3 Add remote in one block
You can also add many remote controls in one block (batch). The serial numbers of each remote control must follow each other in series. Simply confirm the number of remote controls to register and then present the first one in the series.
Scroll until "menu Add Tx" then press "P3 "
menu A dd T x
Scroll until "Add Block" then press "P3 "
A dd B lo ck
Type the number of remotes to add
H ow many
Tx?
000
Once added, the button A will be associated to relay #1 and button B to relay #2
Wa i t Tx 0 000 0000
Press any button of the first remote of the series. or The serial number is printed on the back of the remote. (Note: use "P4 " to shift left).
cdvigroup.com 13
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
5. Deleting Rem ote ( Tx)
5.1 Delete remote one at a time (will completely remove the remote)
Scroll until "menu Del Tx" then press "P3 "
menu Del Tx
Scroll until "Delete Tx" then press "P3 "
Dele te Tx
5.2 Delete remotes in one block
Wa i t Tx 0 000 0000
Press any button of the remote or type manually its serial number. The serial number is printed in the back of the remote. (Note: use "P4 " to shift left).
You can also delete multiple remotes in one block (batch). The serial numbers of each remote must follow each other in series. Simply confirm the number of remotes to delete and then present the first one in the series.
Scroll until "menu Del Tx" then press "P3 "
menu Del Tx
Scroll until "Delete Block" then press "P3 "
Dele te B lo ck
Wa i t Tx 0 000 0000
Press any button of the first remote of the series. or type manually its serial number. The serial number is printed on the back of the remote. (Note: use "P4 " to shift left).
H ow many T a g ? 000
Type the number of remotes to delete
1 0 0 T ag?
No
Yes
Press "P1 " t o select t hen "P3 " to confirm
5.3 Delete remote from a list
This way is useful when you do not have the remote control in your hand but only its serial number from a list.
Scroll until "menu Del Tx" then press "P3 "
menu Del Tx
Scroll until "Delete Tx" then press "P3 "
Dele te by Li st
5.4 Delete all remotes
Scroll until "menu Del Tx" then press "P3 "
menu Del Tx
Scroll until "Delete All Tx" then press "P3 "
Dele te A l l Tx
Pos :0005 0 000 0 123
Scroll using "P1 " or "P2 " until you find the right serial number (red rectangle). Then press "P3 " to select.
C o n f i rm?
No
Yes
Press "P1 " to select, then press "P3 " to confirm.
Press "P1 " t o select t hen "P3 " to confirm
C o n f i rm?
No
Yes
14 cdvigroup.com
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
6 . Settings
Scroll until "menu Settings" then press "P3 "
menu S et t i ngs
Scroll to desire selection then press "P3 "
S et t i ngs I nt er va l
The interval is the time between each reading of the same serial number which remains in the range of the reader.
Set to: 0, 5, 10, 20 or 30 sec. (default: 10 sec.)
S et t i ng s D ead T i me
The deadtime is the time that a tag must stay out of the detection zone before time to be re-detected at-once. Set to: 0, 1, 2, 3, 4, 5, 6, 7, 8 or 9 sec. (default 5 sec.)
S et t i ngs A nt e nna
A nt e nna1 A dd r e s s
A nt e nna1 C ode
A nt e nna2 A dd r e s s
See note (1) A dd r e s s1
0 0001
Set the Wiegand code of the antenna: 1 to 9 (default: 1). See note (2) W i e g and1
1
See note (1) A dd r e s s2
0 0002
A nt e nna2 C ode
Set the Wiegand code of the antenna: 1 to 9 (default: 2). See note (2)
W i e g and2 2
IMPORTANT NOTE:
(1) At the first power up, the antenna address is populated automatically with its serial number when the first UHF credential will be read by the antenna.
Read a UHF credential to know the address position (1 or 2) of an antenna. The RF module will display "A1" for address 1 and "A2" for address 2 of an antenna.
To replace a defective antenna, you must manually reset its address to "00000", connect the new antenna and then pass a UHF badge to automatically populate the new address.
(2) See section 14 for Wiegand format details.
Dele te S et t i ngs
Sets the receiver to the factory default settings.
cdvigroup.com 15
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
7. Configuration
7.1 Wiegand Output Settings
Scroll until "menu Config" then press "P3 "
menu C on f i g
Scroll to desire Wiegand setting then press "P3 "
W i e g and B it
B it 26 Bi t
Set the Wiegand protocol to: 26, 30 or 44 bit (default 26-bit).
W i e g and F i l ter
F i l ter A --D
Select the buttons that will be used to transmit the Wiegand data.
7.2 Relay Output Settings
Scroll until "menu Config" then press "P3 "
menu C on f i g
Scroll to desire relay setting then press "P3 "
C on f i g R el ay 1
Scroll to desire relay setting then press "P3 "
R el ay 1 Pul se
C on f i g R el ay 2
R el ay 1 S tep
R e l ay 1 T imed
R e l ay 1 D i s a b l ed
h h mm ss 0 0 : 0 0 : 00
Use "P1 " and "P2 " t o set t he values, then "P3 " to confirm and shift left, press "P4 " to go back.
7.3 Relay activation per remote buttons
Scroll until "menu Config" then press "P3 "
Scroll until "Edit Tx" (it display the total amount of memorized remotes, ex: 052). then press "P3 "
menu C on f i g
E di t Tx N# 052
P os 001 1 234 56 7 8
Le g e n d : · A, B, C or D= active button · - = inactive button · Press "P4 " to go back or exit menu
R e l ay 1 A-C -
R e l ay 2 -B-D
Button A Button B
Button A Button C Button D Button B
Use "P1 " and "P2 " t o set which buttons will activate "Re la y 1 ", t hen "P3 " to confirm and shift right.
At the end of the sequence of 4 buttons, press "P3 " to configure "Re la y 2 ". Repeat the same steps as for "Re la y 1 ". Press "P3 " t o
confirm.
16 cdvigroup.com
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
8 . Backup
Upload or download the full database using an external memory card
1) Plug-in the memory into the connector (Red Rubber Memory = 512 Kbit)
Scroll until "menu Backup" then press "P3 "
menu B ack up
!
Restoring from the external memory will overwrite ALL module database.
Scroll to desire backup option then press "P3 "
B ack up to Module to memory card
B ac k up f rom Memory card to module
cdvigroup.com 17
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
9 . Option
The menu "Option" allows you to enable ("ON" or "OFF") the "Auto-Install" feature. The "Auto-Install" feature allows you to register other remote controls from any remote control already memorized in the module.
I M PORTAN T N OTE: One remote must be memorized in the receiver.
9.1 Memorization of a new remote (Tx)
Place the two remotes ("M e m or ize d Tx " and the "N e w Tx ") next to each other then do the following:
LED Blinks
LED Blinks
LED turns off
LED blinks quickly
"Memorized Tx"
Press & hold A+B buttons simultaneously for 3 sec :
The LED blinks slowly See note #1
"New Tx"
Within 15 sec., press & hold A+B buttons simultaneously of the "NEW Tx" for 3 sec :
The LED blinks slowly
"Memorized Tx"
Within 15 sec. press & hold the "A" button of the
"Memorized TX" for 1 sec : The LED turns off
"New TX"
Receiver
"New Tx"
The LED of the "New Tx" blinks quickly : Auto-Install is authorized.
See note #2
Long Beep
Once the new remote has been "Au t h or ize d", stand next to the receiver and press button A for 1 sec. The receiver makes a long beep: The remote has been memorized and is ready for use.
It may take up to 6 seconds for the receiver before hearing the confirmation beep of a "N e w Tx ".
I MPORTAN T N OTES : 1. Must be a remote already memorized in the receiver. 2. If you press any button of the authorized "N e w Tx " out of reception range of the receiver more than 15
times, the Auto-Install property stops and the procedure must be restarted.
18 cdvigroup.com
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
10 . I nfo
Scroll until "menu Info" then press "P3 "
menu I nfo
Scroll to desire info then press "P3 "
I nfo Out p u t
Displays the current output settings: If output set in "Relay" mode, it will display relays operating settings; pulse, latched or timed
If output set in "Wiegand" mode, it will display system protocol; 26, 30 or 44 bits
I nfo N . Tags
Displays the number of UHF credential that are registered. (7680 max. in stand-alone, "Relay" mode)
I nfo N. Tx
Displays the number of remotes (Tx) that are registered. (100 max. in stand-alone, "Relay" mode)
T ag L ist
Displays the UHF credential memory position (Useful to delete a specific UHF credential from the list)
Tx L ist
Displays the remote control (Tx) memory position (Useful to delete a specific remote "Tx" from the list)
I nfo V e r s i on
Displays firmware version of the module
cdvigroup.com 19
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
1 1 . UH F Cr e de nt ia l I nst a lla t ion
Choose one of the six places (A-F) on the windshield as showed in the figure below to install. According to the European Standard, some vehicles with metalized windshield have a reserved area (not metalized) for RFID tags so choose position B.
B
Card or cardholder
A
Steering wheel
F
C
Rearview mirror
E
D
For optimum performance, install the UHF credential on the same side of the reader. (left side A or F, Right side C or D and overhead B or E).
N OTE: When there is a metalized windshield, the read range of the reader will be affected. Please test the performance before using it.
Reader
TAG
TAG
Reader
TAG
TAG
20 cdvigroup.com
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
1 2 . Parking or Garage Application Diagram Direction of traffic flow
Presence vehicle loop
Tag read zone
Gate Exit loop
Readers should be at least 4,5m apart
Reader
Reader
Exit loop Gate
Tag read zone
Presence vehicle loop
Direction of traffic flow
cdvigroup.com 21
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
1 3 . Using a nd I nst a lling UH F Cr e de nt ia l 13.1 Regular ISO or Clamshell UHF Credential
Use a card to test reader position for optimal performance. At t e n t ion : the card is very sensitive to the human hand. The performance of detection can drastically change according to the way of holding the card. Look at the following images to understand the best way to hold the card:
Hold the card with an outstretched arm, away from the body. If the card is held near the body the performances can decrease a lot. A card held in a wallet cannot be detected. A card in touch with the clothes cannot be read.
13.2 UHF Windshield Sticker Credential (ATU48)
The UHF windshield sticker position is similar to the card, as described above. Best use on the surface of a window or headlights. I M PORTAN T: Once fixed, the UHF windshield sticker cannot be ripped off and reused. Please test the performance before installation.
13.3 UHF License Plate UHF Credential (PTU48)
Use only for license plates. Use the screws to fix the tag on the bottom of the license plate. Please test the performance before installation.
22 cdvigroup.com
A6 U4 9 and A1 0 U4 9 Mid t o Long- Range UHF Readers
1 4 . W iegand Output Form ats
The wireless receiver converts the serial number of the UHF credentials and the remotes (Tx) in Wiegand format. The architecture of the Wiegand signal is different according to the number of bits set ( 26, 30 or 44 bit ).
14.1 Wiegand UHF Credential Format
Wiegand 26
Bit 1
Bit 2 - 5
Even Parity ( 1 bit ) [ 4 bit Address ] (*)
Bit 6 - 2 5 [ 20 bit S/N ]
Bit 2 6 Odd Parity ( 1 bit )
Wiegand 30
Bit 1
Even Parity ( 1 bit )
Bit 2 - 5 [ 4 bit Address ]
Bit 6 - 2 9 [ 24 bit S/N ]
Bit 3 0 Odd Parity ( 1 bit )
Wiegand 44
Bit 1 - 4
Bit 5 - 8
0000 ( fixed ) [ 4 bit Address ]
Bit 9 - 4 0 [ 32 bit S/N ]
Bit 4 1 - 4 4 LRC (**)
(*) Is the address of the receiver set in the settings sub-menu. (**) Longitudinal Redundancy Check
14.2 Wiegand Remotes (Tx) Format
Wiegand 26
Bit 1
Bit 2 - 5
Even Parity ( 1 bit ) [ 4 bit Button ] (*)
Wiegand 30
Bit 1
Bit 2 - 5
Even Parity ( 1 bit ) [ 4 bit Button ] (*)
Wiegand 44
Bit 1 - 4
0000 ( fixed )
Bit 5 - 8 [ 4 bit Button ] (*)
Bit 1 0 - 2 5 [ 20 bit S/N ]
Bit 6 - 2 9 [ 24 bit S/N ]
Bit 9 - 4 0 [ 32 bit S/N ]
Bit 2 6 Odd Parity ( 1 bit )
Bit 3 0 Odd Parity ( 1 bit )
Bit 4 1 - 4 4 LRC (**)
Button A B C D
Code 1010 1011 1100 1101
(*) The 4 buttons remote are in hexadecimal format. See the table beside.
(**) Longitudinal Redundancy Check
W ARRAN TY AN D D ECLARATI ON OF CON FORM I TY
Hereby, CDVI Wireless Spa, declares that the radio equipment types A6U49 and A10U49 complies with the Standard 47 CFR FCC Part 15, subpart B. The full text of the Declaration of conformity is available at the following internet address: www.erone.com.
WARRANTY The warranty period for this product is 10 years, beginning from the manufacturer date. During this period, if the
product does not work correctly, due to a defective component, the product will be repaired or substituted at our discretion. The guarantee does not cover the plastic container integrity. After-sale service is supplied at the factory.
IS-A10U49EN, Rev.5 on 19/4/2020
cdvigroup.com 23
CD VI AM ERI CAS
[CANADA - USA - LATIN AMERICA]
www.cdvi.ca
CD VI BEN ELUX
[BELGIUM - NETHERLAND - LUXEMBOURG]
www.cdvibenelux.com
CD VI FRAN CE www.cdvi.com
CD VI I BÉRI CA
[SPAIN - PORTUGAL]
www.cdviberica.com
CD VI I TALI A www.cdvi.it
CD VI M AROC www.cdvi.ma
CD VI POLSKA www.cdvi.com.pl
CD VI SUI SSE
[SWITZERLAND]
www.cdvi.ch
CD VI SW ED EN
[SWEDEN - DENMARK - NORWAY - FINLAND]
www.cdvi.se
CD VI UK
[UNITED KINGDOM - IRELAND - SOUTH AFRICA]
www.cdvi.co.uk
www.cdvi.ca
All the inform ation contained within this docum ent ( pictures, drawing, features, specifications and dimensions) could be perceptibly different and can be changed without prior notice.
Reference manual: CDVI_U4GO_IM_01_EN_A4_CMYK.pdf - Printed in Canada - April 2020