1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your JBL Vibe 100 TWS True Wireless In-Ear Headphones. Please read this manual thoroughly before using your device to ensure optimal performance and longevity.
The JBL Vibe 100 TWS earbuds deliver JBL Deep Bass Sound, offering a rich audio experience. They feature Dual Connect technology for flexible use and an ergonomic design for comfort during extended listening sessions.
2. What's in the Box
- JBL VIBE 100 TWS Headphones (Left and Right earbuds)
- USB-C Charging Cable
- Charging Case
- 2 Pairs of Ear Tips (in addition to the pre-installed pair, total 3 sizes)
- Quick Start Guide (QSG)
Image: JBL Vibe 100 TWS earbuds shown with their charging case.
3. Setup
3.1 Charging the Earbuds and Case
Before first use, fully charge the earbuds and the charging case. The charging case provides additional battery life for your earbuds.
- Insert the earbuds into the charging case.
- Connect the USB-C charging cable to the charging port on the back of the case and to a power source.
- The LED indicator on the case will show charging status.
- A full charge for the earbuds provides approximately 5 hours of playback. The charging case provides an additional 15 hours, totaling up to 20 hours of battery life.
Image: The charging case with earbuds inserted, ready for charging.
3.2 Pairing with a Bluetooth Device
The JBL Vibe 100 TWS earbuds utilize Bluetooth 5.0 for wireless connectivity.
- Ensure the earbuds are charged and placed in the charging case.
- Open the charging case. The earbuds will automatically enter pairing mode.
- On your Bluetooth-enabled device (e.g., smartphone, tablet), go to the Bluetooth settings.
- Select "JBL Vibe 100 TWS" from the list of available devices.
- Once connected, you will hear an audible confirmation, and the LED indicator on the earbuds may change.
Video: Official overview of JBL Vibe 100 TWS Wireless Earbuds, demonstrating key features and connectivity.
3.3 Selecting the Right Ear Tips
For optimal sound clarity and comfort, choose the ear tips that provide a secure seal in your ear canal. The earbuds come with three sizes of ear tips.
- Gently pull off the pre-installed ear tips.
- Select a different size and push it onto the earbud nozzle until it clicks into place.
- Test different sizes to find the best fit for your ears. A good fit enhances bass performance and noise isolation.
Image: The ergonomic design of the JBL Vibe 100 TWS earbuds, emphasizing comfort.
4. Operating the Earbuds
4.1 Basic Controls
The JBL Vibe 100 TWS earbuds feature intuitive touch controls for managing your audio and calls.
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap on the right earbud.
- Previous Track: Double tap on the left earbud.
- Answer/End Call: Single tap on either earbud.
- Reject Call: Press and hold on either earbud.
- Activate Voice Assistant: Triple tap on either earbud.
4.2 Dual Connect Technology
The Dual Connect feature allows you to use either the left or right earbud independently, or both together.
- To use a single earbud, simply take one out of the charging case. The other earbud can remain in the case or be used simultaneously.
- This feature is useful for making calls or listening to audio while keeping one ear free.
Image: A user demonstrating hands-free calling with a single JBL Vibe 100 TWS earbud.
5. Maintenance
5.1 Cleaning
Regular cleaning helps maintain sound quality and hygiene.
- Gently wipe the earbuds and charging case with a soft, dry, lint-free cloth.
- Remove ear tips and clean them with mild soap and water, then dry thoroughly before reattaching.
- Avoid using harsh chemicals or abrasive materials.
5.2 Water Resistance
The JBL Vibe 100 TWS earbuds are water resistant. This means they can withstand splashes and light rain, but they are not designed for submersion in water.
- Do not expose the earbuds or charging case to excessive moisture.
- Ensure the charging port is dry before connecting the charging cable.
6. Troubleshooting
If you encounter issues with your JBL Vibe 100 TWS earbuds, try the following steps:
- No Sound/Intermittent Sound:
- Ensure earbuds are charged.
- Check Bluetooth connection on your device. Try disconnecting and reconnecting.
- Ensure earbuds are within range of your device.
- Clean any debris from the earbud nozzles and ear tips.
- Earbuds Not Pairing:
- Place both earbuds back in the charging case, close the lid, then open it again to re-enter pairing mode.
- Forget "JBL Vibe 100 TWS" from your device's Bluetooth settings and attempt to pair again.
- Ensure no other Bluetooth devices are interfering with the pairing process.
- Charging Issues:
- Verify the USB-C cable is securely connected to both the case and the power source.
- Try a different USB-C cable or power adapter.
- Ensure the charging contacts on the earbuds and inside the case are clean and free of debris.
If problems persist, refer to the official JBL support website or contact customer service for further assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | JBL |
| Model Name | JBL Vibe 100 TWS Black |
| Connectivity Technology | Wireless (Bluetooth) |
| Wireless Communication Technology | Bluetooth 5.0 |
| Audio Driver Size | 8 Millimeters |
| Sensitivity | 105.5 dB |
| Battery Life (Earbuds) | 5 Hours |
| Total Battery Life (with Case) | 20 Hours |
| Charging Time | 5 Hours (for full charge, likely case + earbuds) |
| Item Weight | 1.62 ounces (46 Grams) |
| Product Dimensions | 3.35 x 1.18 x 4.72 inches |
| Water Resistance Level | Water Resistant |
| Special Feature | Lightweight, Microphone Included |
| Control Type | Voice Control |
| Earpiece Shape | In Ear |
| Material | Plastic |
8. Warranty and Support
This product is an Amazon Renewed item, which means it has been professionally inspected and tested to work and look like new. It is eligible for replacement or refund under the Amazon Renewed Guarantee if you are not satisfied with your purchase.
For further support, including detailed warranty information or technical assistance, please visit the official JBL support website or contact Amazon Renewed customer service.
