TIBO Harmony Series Speakers User Guide

Contents hide

1 TIBO Harmony Series Speakers

2 Introduction

3 In the Box

4 Wiring the speakers

5 Positioning loudspeakers

6 Available in black and white

11 Documents / Resources

12 Related Posts

TIBO Harmony Series Speakers

Introduction

Thank you for purchasing the TIBO Harmony Series. We are confident that it will provide reliable, high-performance sound for many years to come. Please read this manual fully before you attempt any connection to the Harmony series. Please do not compromise on your amplifier and audio cabling. We recommend you purchase an excellent quality speaker cable to ensure your system reaches it’s full potential. TIBO’s range of Smart Amplifiers and experience great new features.

Smart Amp
Presets

App Control
Multiplay & Place

Bluetooth
TuneIn

Deezer
Spotify

In the Box

Harmony 2 / 4 / 8

Speaker x 2

Speaker grill x 2

Harmony 5 Pack

Front speaker x 2
Centre speaker x 1

Rear speaker x 2

Wiring the speakers

All Harmony speakers use screw terminals. Unscrew the terminal insert the bare end of the cable into the hole in the base of the terminal, tighten securely. Ensure positive + and negative – are matched with the amplifier/receiver.

Positioning loudspeakers

The listener should be as far from the loudspeaker as they are from each other. The speaker should ideally be positioned so the treble units (tweeter) are roughly at ear level to the seated listener. As personal taste plays a large role, experiment with different configurations using a wide range of music, before finalizing the position of your loudspeakers.