THRUNITE Ti2 Keychain Flashlight User Manual

Contents hide

Ti2 flashlight adopts a CREE XTE LED to make output up to 120 lumens.

Technical Parameters
LED		Reflector		Working Voltage	Material	Surface Finish	Dimension	Weight
CREE XTE*1		TIR Optical lens		0.9-3V	AL T6061-T6	Premium type III hard-anodized	60mm*14mm	7.2g Battery excluded
Accessories	Key Ring*1
ANSI/NEMA FL1 Parameters
			General Mode
Output			120 lumens
Run time			45 mins
Distance			48 meters (max.)
Intensity			600 cd (max.)
Impact Resistance			1 meter
Waterproof			IPX-8 (2M)

Notes: The above parameters tested by one AAA battery (900mAh) are approximate and may vary between lights, batteries and operating environment.

Turn ON/OFF
Simply twist the head to turn On/Off the light. Tighten the head for on and loosen for off.

Warranty

2-years free replacement: We will offer free replacement within 2 years of purchase if problems develop with normal use.
30-days refund by Amazon: You may return most new, unopened items sold and fulfilled by Amazon within 30 days of delivery for a full refund.
Lifetime limited maintenance: As to those exceed 2 years of the purchase date, we will still provide with maintenance service, but the cost of parts will be .

Warnings

THRUNITE flashlights are high-intensity lighting devices capable of causing eye damage or other harms, so please avoid shining our light directly into anyone’s eyes.
Please keep flashlights away from children.
To protect the battery, driver circuit and LED, we DO NOT recommend you run the light at max mode more than ten minutes.

+86-0755-26809357
service@thrunite.com
www.thrunite.com
Room 640, Tower A,
NO.168 Baoyuan Road, Xixiang, Baoan, Shenzhen 518102, China