THORN HFI Force LED
Features
Mounting instructions
Important notices. Please, read first! Keep the instructions safe! Specifications are subject to change without notice! If you have questions, please contact the manufacturer.
What is in the Box?
DIMENSIONS
IP66 IK10 MOUNTING OPTIONS (OVERVIEW)
OPTION SENSOR MWS
BC (Bluetooth® CASAMBI)
WEBSITE
www.tridonic.com/basicdim-wireless
HANDBOOK
PLANNING NOTES WIRELESS
WIRING CONFIGURATIONS
- HF / BC / MWBC / CORMBC
- HF E3 / BC E3 / MWBC E3 / CORMBC E3 / HF E3DBC / BC E3DBC
- HFI
- HF E3D / HFI E3 / HFI E3D / BC E3D / MWBC E3D / CORMBC E3D / HFI E3DBC
- 0.75mm2 – 1.0mm2 8-9mm
1.5mm2 – 2.5mm2 9-10mm
CHANGE BATTERY
OLD BATTERY
NEW BATTERY
Instructions for installation and operation!
The installation and commissioning of the luminaire as well as any modification to the luminaire may only be performed by authorized personnel (qualified electrician). National installation regulations must be observed. Before any work on the appliance is done, it must be disconnected from mains. Hot plug-in is not an option and may cause damage to the lamp or luminaire! The manufacturer is not liable for damages resulting from improper or faulty installation or operation or from unauthorized modifications to the luminaire. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person.
Caution, risk of electric shock!
Specifications are subject to change without notice! If you have questions, please contact the manufacturer.
INFO ON (NON-) REPLACEABILITY:
Customer Support
Thorn Lighting Limited
Durhamgate Spennymoor
Co. Durham DL16 6HL UK
Documents / Resources
 | THORN HFI Force LED [pdf] Owner's Manual 4000 840 BC, 4000 840 HFI QC5, 7000-840 HF, HFI Force LED, HFI, Force LED, LED |