Flagpole Holder
Instruction Manual
Easy to Stall
 |
|||
| 1. Mark the drilling position first | 2. Drill holes about 1.6° depth and 0.24″wldth | 3. Fix flagpole holder by installing in the flagpole installing screws and anchors into the holes. | 4. Insert the flagpole into the hole and use butterfly screw to fix flagpole |
- Rod and rod rotate connection
- Use the flagpole rotaion to adjust the flag to the appropriate length
- Fix the mount and plug in the flagpole
Documents / Resources
 | Flagpole Holder |
References
- User Manualmanual.tools
Published: April 4, 2025