SB-011 Digital Miter Saw Protractor

1 Description of Symbols

The following symbols are on the product/appliance or are used in the text:

• ⚠️[Warning Symbol]: This symbol warns of hazards that can lead to personal injury.

2 Safety Instructions

Read this document and the accompanying operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

2.1 General

• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
• If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
• Maintenance, modifications, and repairs must only be completed by a technician or an authorised repair centre.

2.2 Handling

• Handle the product carefully. Jolts, impacts, or a fall even from a low height can damage the product.

2.3 Operating Environment

• Do not place the product under any mechanical stress.
• Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam, and solvents.
• Protect the product from high humidity and moisture.
• Protect the product from direct sunlight.
• Do not switch the product on immediately after it has been taken from a cold to a warm environment. The condensation that forms might destroy the product. Allow the product to reach room temperature before you use it.

2.4 Operation

• Consult an expert when in doubt about the operation, safety, or connection of the product.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
  • is visibly damaged,
  • is no longer working properly,
  • has been stored for extended periods in poor ambient conditions, or
  • has been subjected to any serious transport-related stresses.

2.5 Battery

• Correct polarity must be observed while inserting the battery.
• The battery should be removed from the device if it is not used for a long period of time to avoid damage through leaking. Leaking or damaged batteries might cause acid burns when in contact with skin; therefore, use suitable protective gloves to handle corrupted batteries.
• Batteries must be kept out of reach of children. Do not leave batteries lying around, as there is a risk that children or pets may swallow them.
• Batteries must not be dismantled, short-circuited, or thrown into fire. Never recharge non-rechargeable batteries. There is a risk of explosion!

3 Replacing Batteries

The device uses a CR2032 battery.

To replace the battery:

• Locate the battery compartment on the device.
• Open the compartment (usually by sliding or unscrewing a cover).
• Remove the old battery, observing correct polarity.
• Insert the new CR2032 battery, ensuring correct polarity (+/-).
• Close the battery compartment securely.

Note: The image shows the digital protractor with buttons labeled CROWN, NEXT/SEL, S/M CUT, SET, HOLD, REV. The display shows measurements such as "120 mm".

4 Disposal

Important: Dispose of WEEE (Waste from Electrical and Electronic Equipment), used batteries/rechargeable batteries, and packaging in accordance with the laws and regulations in force in your country. WEEE and used batteries/rechargeable batteries not only contain valuable raw materials but sometimes also hazardous substances which, if released, can adversely affect the environment.

Check the dealer's website, the website of your local service provider, or your municipal waste management authority to learn how to dispose of WEEE, used batteries/rechargeable batteries, and packaging correctly. Proper disposal ensures compliance with legal regulations and contributes to a cleaner environment.

4.1 Product

Any electrical and electronic equipment placed on the European market shall bear the following symbol [WEEE symbol], indicating that the equipment must be disposed of separately from unsorted municipal waste at the end of its useful life.

• Owners of WEEE shall dispose of it separately from unsorted municipal waste.
• Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE before it is handed over to a collection point.
• Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. You can also hand in old devices to the collection points of the public waste management authorities or to the take-back points set up by manufacturers or distributors as defined by the Electrical and Electronic Equipment Act (ElektroG).
• End users are responsible for deleting personal data from the WEEE to be disposed of.

4.2 Batteries/Akkus

• Batteries or rechargeable batteries that are not permanently installed in the old device (e.g., with a battery compartment or similar) must be removed beforehand and disposed of separately.
• According to the Battery Directive, end users are legally obliged to return all spent batteries/rechargeable batteries; they must not be disposed of in normal household waste.
• Batteries/rechargeable batteries containing hazardous substances are labelled with the following symbol ?[Hazardous Waste Symbol] to indicate that disposal in household waste is forbidden. The following abbreviations are used for heavy metals found in batteries: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable) batteries, e.g., below the trash icon on the left [trash icon]).
• You can return used batteries to a local recycling point or battery retailer.
• Batteries/rechargeable batteries that are disposed of should be protected against short circuits, and their exposed terminals should be covered completely with insulating tape before disposal. Even empty batteries/rechargeable batteries can contain residual energy that may cause them to swell, burst, catch fire, or explode in the event of a short circuit.

5 Technical Data