Eliwell Manuals & User Guides

Eliwell has been a global leader in the HVAC/R industry for over 35 years, delivering advanced control systems and services for commercial and industrial refrigeration units. As a brand of Schneider Electric, Eliwell develops innovative solutions ranging from programmable controllers and sensors to complete monitoring systems for supermarkets and cold storage facilities.

Their product lines, such as Coldface and IDPlus, are renowned for reliability, energy efficiency, and ease of integration into complex automation environments.

• How do I change the Set Point on my Eliwell controller?

  To modify the Set Point, press and release the SET key. The display will show 'SEt'. Press SET again to view the current value, then use the UP and DOWN keys to adjust it. Press SET or ESC to confirm and exit.

• What does the E1 alarm indicate?

  On many Eliwell controllers, the E1 error code indicates a fault with the cold room temperature probe (Pb1). Check the probe connection and sensor integrity.

• How do I switch between NTC and PTC probes?

  Parameter H00 is typically used to configure the probe input type (0 for PTC, 1 for NTC). After changing this parameter, you must switch the instrument off and on again for the setting to take effect.

• How do I manually defrost the system?

  Manual defrost can usually be activated by pressing and holding the UP or ESC key (depending on the specific model, such as the EWRC series) for several seconds.