VEVOR Adjustable Workbench FGM6022V Instruction Manual

สินค้าเกินview

This manual provides instructions for the VEVOR Adjustable Workbench, Model FGM6022V. This 60-inch heavy-duty workbench features a 1.2-inch thick oak wood top, adjustable height, an integrated power outlet, and options for both stationary use with rubber feet or mobile use with universal wheels. It also includes a side pegboard for tool organization.

ข้อมูลด้านความปลอดภัย

• Read all instructions thoroughly before assembly and use.
• Ensure all components are securely fastened before placing items on the workbench.
• ห้ามเกินขีดความสามารถในการรับน้ำหนักสูงสุด 2000 ปอนด์ (907.2 กก.)
• Use the built-in power outlet only with compatible devices and ensure the workbench is properly grounded by plugging its power cord into a suitable wall outlet.
• Keep children and pets away from the workbench during assembly and use.
• When moving the workbench, ensure the path is clear and casters are unlocked. Lock casters to secure the workbench in its desired position.
• Avoid exposing the oak wood top to excessive moisture or extreme temperatures to preserve its integrity.

เนื้อหาแพ็คเกจ

ตรวจสอบให้แน่ใจว่าชิ้นส่วนทั้งหมดครบถ้วนและไม่เสียหายก่อนเริ่มประกอบ หากมีชิ้นส่วนใดขาดหายหรือเสียหาย โปรดติดต่อฝ่ายบริการลูกค้าของ VEVOR

• Oak Wood Desktop (1)
• Carbon Steel Frame Components (Legs, Support Beams)
• Power Outlet Strip (with 2 USB ports, 4 AC outlets, 9.8 ft cable)
• Universal Swivel Casters (4)
• เท้ายาง (4)
• Side Pegboard Panels
• ตะขอแขวนแผ่นไม้
• Assembly Hardware (bolts, nuts, washers, adjustment knobs)
• คู่มือการใช้งาน

การติดตั้งและการประกอบ

Assembly typically requires two people due to the weight and size of the components. Follow these steps carefully:

Step 1: Prepare the Desktop

Place the oak wood desktop upside down on a clean, soft surface (e.g., a blanket or cardboard) to prevent scratches during assembly.

Step 2: Attach Frame Components

Secure the carbon steel frame components (legs and support beams) to the underside of the desktop using the provided hardware. Ensure all bolts are finger-tightened initially to allow for minor adjustments.

ภาพ: ด้านล่าง view of the VEVOR workbench frame during assembly, showing the carbon steel legs and support beams attached to the oak desktop.

Step 3: Install Feet or Casters

Decide whether to use the rubber feet for stationary use or the universal swivel casters for mobility. Attach the chosen components to the bottom of the leg frames. If using casters, ensure two are lockable for stability when the workbench is in position.

Image: A person standing next to the VEVOR workbench, highlighting the interchangeable rubber feet for stability and swivel casters for mobility. The workbench is rated for a 2000 lbs load capacity.

Step 4: Attach Power Outlet Strip

Mount the power outlet strip to the designated area on the side of the workbench frame using the provided screws. Connect the power cable to the strip.

ภาพ: ภาพระยะใกล้ view of the workbench's integrated power strip, featuring two USB ports and four three-prong AC outlets, with a power cable extending from it.

Step 5: Install Side Pegboard and Hooks

Attach the side pegboard panels to the frame using the appropriate hardware. Insert the provided hooks into the pegboard holes to organize tools as desired.

Image: The side of the VEVOR workbench featuring a pegboard panel with various wrenches and a power cord hanging on hooks, demonstrating tool organization.

ขั้นตอนที่ 6: การขันขั้นสุดท้าย

Once all components are in place and the workbench is upright, securely tighten all bolts using the appropriate tools. Do not overtighten.

คำแนะนำการใช้งาน

การปรับความสูงของโต๊ะทำงาน

The workbench height can be adjusted from 28 to 39.5 inches (711 mm to 1003 mm) using 6 distinct settings. To adjust, loosen the adjustment knobs on each leg, raise or lower the desktop to the desired height, and then securely tighten the knobs. No additional tools are required for height adjustment.

Image: The VEVOR workbench illustrating its 6-level adjustable height feature, ranging from 28 to 39.5 inches. A hand is shown adjusting a knob on the leg for height modification.

Using Casters and Rubber Feet

If universal swivel casters are installed, unlock them to move the workbench freely. Lock the casters to secure the workbench in a stationary position. If rubber feet are installed, the workbench will remain stationary and provide stability.

Using the Built-in Power Outlet

Plug the workbench's power cable into a standard 125V 15A wall outlet. Use the integrated power strip to power tools and charge devices via the 4 AC outlets and 2 USB ports. The power strip is ETL certified for safety. Always ensure the power strip's control switch is in the 'ON' position for power delivery.

Organizing Tools with Pegboard

Utilize the side pegboard and included hooks to keep frequently used tools organized and easily accessible, helping to maintain a tidy workspace.

การซ่อมบำรุง

• การตรวจสอบปกติ: Periodically inspect all bolts, fasteners, and adjustment knobs for tightness and re-tighten as needed to ensure stability.
• การทำความสะอาดเดสก์ท็อป: Clean the oak wood top with a damp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals that could damage the wood finish.
• การดูแลไม้: For prolonged wood life and to maintain its appearance, consider applying a wood conditioner or sealant periodically, especially in dry environments.
• Power System Check: Regularly check the power cord and outlet strip for any signs of damage, such as frayed wires or cracked housing. Discontinue use immediately if damage is found and contact customer support.
• Pegboard Load: Avoid placing excessive weight on the pegboard or hooks to prevent damage to the panels or the workbench frame.

การแก้ไขปัญหา

Workbench is unstable or wobbly

• Ensure all assembly bolts and leg adjustment knobs are securely tightened.
• If using casters, verify that the locking mechanisms on at least two casters are fully engaged.
• If using rubber feet, ensure they are evenly adjusted on a level surface to eliminate any rocking.

ปลั๊กไฟไม่ทำงาน

• Check if the workbench's main power cable is securely plugged into a functional wall outlet.
• Verify that the power strip's main control switch is in the 'ON' position.
• Ensure the device you are trying to power is working correctly by testing it in another outlet.
• If the issue persists after checking these points, there may be an internal fault. Discontinue use and contact VEVOR customer support.

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

VEVOR products are designed for durability and performance. For technical support or to register for an e-warranty certificate, please visit the official VEVOR webไซต์ที่ www.vevor.com/support.

This product typically includes a 30-day easy return policy. Refer to your purchase documentation for specific warranty terms and conditions applicable to your region.