1. บทนำ
Thank you for choosing the Srliya TA881A Induction Electric Pen. This non-contact voltage tester is designed for safe and efficient detection of AC voltage in electrical circuits, helping you identify live and null wires without direct contact. Please read this manual thoroughly before use to ensure proper operation and safety.
ข้อมูลด้านความปลอดภัย
- ควรสันนิษฐานเสมอว่าวงจรไฟฟ้ายังมีกระแสไฟอยู่ จนกว่าจะมีหลักฐานพิสูจน์เป็นอย่างอื่น
- ห้ามใช้งานอุปกรณ์หากพบว่าชำรุดเสียหายหรือทำงานผิดปกติ
- This device is intended for non-contact voltage detection only. Do not attempt to use it for direct contact measurements.
- เก็บอุปกรณ์ให้ห่างจากน้ำและอุณหภูมิที่สูงหรือต่ำเกินไป
- เปลี่ยนแบตเตอรี่ทันทีเมื่อไฟแสดงสถานะแบตเตอรี่อ่อนปรากฏขึ้นเพื่อให้แน่ใจว่าการอ่านค่าแม่นยำ
2. สินค้าหมดview
ส่วนประกอบและคุณสมบัติ
The Srliya TA881A is a compact and user-friendly non-contact voltage tester. It features a digital display, LED indicators, and a built-in flashlight for convenience.

รูปที่ 2.1: มุม view of the Srliya TA881A Induction Electric Pen, highlighting its ergonomic design and control buttons.
- แบบไม่สัมผัส Voltagการตรวจจับ: ตรวจจับปริมาณไฟฟ้ากระแสสลับได้อย่างปลอดภัยtagจาก 12V ถึง 1000V
- จอแสดงผลดิจิตอล: Provides clear visual feedback.
- สัญญาณเสียงและแสง: Rapid audible and visual alerts for voltagการตรวจจับอี
- ฟังก์ชั่นไฟฉาย: Integrated LED light for working in dimly lit environments.
- ปิดเครื่องอัตโนมัติ: Conserves battery life by powering off after 3 minutes of inactivity.
- ไฟแสดงสถานะแบตเตอรี่ต่ำ: แจ้งเตือนเมื่อระดับแบตเตอรี่ลดลงtagอีอยู่ในระดับต่ำ
3. การตั้งค่า
การติดตั้งแบตเตอรี่
The TA881A requires two 1.5V AAA batteries (not included) for operation.
- Unscrew the cap at the top of the pen.
- ใส่แบตเตอรี่ AAA ขนาด 1.5 โวลต์ สองก้อน โดยตรวจสอบให้แน่ใจว่าขั้วถูกต้อง (+/-)
- หมุนฝาปิดกลับให้แน่นสนิท

Figure 3.1: Top section of the TA881A, indicating the removable cap for battery access.
4. คู่มือการใช้งาน
เปิด/ปิดเครื่อง
- To power on, press the red power button. The device will emit a short beep and the display will activate.
- To power off, press and hold the red power button until the device shuts down.
แบบไม่สัมผัส Voltagการตรวจจับ e (NCV)
The TA881A can detect both live (firing) and null (ground) wires.
- ตรวจสอบให้แน่ใจว่าอุปกรณ์เปิดอยู่
- Bring the tip of the electric pen close to the wire or outlet you wish to test.
- การตรวจจับสายไฟที่มีกระแสไฟฟ้า: If a live wire is detected, the analog bar on the display will show three red segments, accompanied by a rapid sound and light alarm.
- Null/Ground Wire Detection: If a null or ground wire is detected, the analog bar on the display will show three green segments.

รูปที่ 4.1 : ด้านหน้า view of the TA881A, illustrating the digital display and control buttons for operation.
ฟังก์ชั่นไฟฉาย
To activate the built-in flashlight, long-press the blue button. This is useful for illuminating work areas in low-light conditions. Press the blue button again to turn off the flashlight.
ปิดเครื่องอัตโนมัติ
The tester will automatically shut down after approximately 3 minutes of no induction or button activity to conserve battery life.
5. ข้อมูลจำเพาะ
| คุณสมบัติ | ข้อมูลจำเพาะ |
|---|---|
| แบบอย่าง | TA881A |
| แบบไม่สัมผัส Voltagอี เรนจ์ | แรงดันไฟฟ้า 12-1000 โวลต์ 50/60 เฮิรตซ์ |
| อุณหภูมิในการทำงาน | 0-40 ℃ (32-104 ℉) |
| อุณหภูมิในการจัดเก็บ | -10-50℃ (14-122℉) |
| ความชื้นในการเก็บรักษา | ≤95% |
| ระดับความสูง | ≤2000 เมตร |
| แหล่งจ่ายไฟ | แบตเตอรี่ AAA ขนาด 2 x 1.5V (ไม่รวม) |
| ขนาดแพ็คเกจ | 6.69 x 1.18 x 1.18 นิ้ว |
| น้ำหนักสินค้า | 1.8 ออนซ์ |
6. การบำรุงรักษา
การดูแลรักษาและการเก็บรักษา
- ทำความสะอาดอุปกรณ์ด้วยผ้านุ่มและแห้ง ห้ามใช้น้ำยาทำความสะอาดหรือสารละลายที่มีฤทธิ์กัดกร่อน
- Store the electric pen in a cool, dry place, away from direct sunlight and moisture.
- หากจะไม่ใช้อุปกรณ์เป็นเวลานาน ควรถอดแบตเตอรี่ออกเพื่อป้องกันการรั่วไหล
การเปลี่ยนแบตเตอรี่
When the low battery indicator illuminates, replace the batteries as described in the "Battery Installation" section (Section 3.1) to ensure continued accurate performance.
7 การแก้ไขปัญหา
ปัญหาทั่วไปและแนวทางแก้ไข
- อุปกรณ์ไม่เปิด: ตรวจสอบการติดตั้งแบตเตอรี่และให้แน่ใจว่าแบตเตอรี่ยังใหม่
- No detection or inconsistent readings: Ensure the device is powered on and batteries are not low. Make sure the tip is close enough to the conductor.
- ไฟฉายใช้งานไม่ได้: Check battery level. Ensure the blue button is pressed and held correctly.
8. การรับประกันและการสนับสนุน
ข้อมูลการรับประกัน
This product is covered by a standard manufacturer's warranty. Please refer to the product packaging or your point of purchase for specific warranty terms and conditions.
การสนับสนุนลูกค้า
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Srliya customer support through the retailer where you purchased the product.