SEBSON IR_ES_EA

SEBSON Recessed Ceiling Motion Detector (IR_ES_EA) - Anthracite

คู่มือการใช้งาน

1. บทนำ

Thank you for choosing the SEBSON Recessed Ceiling Motion Detector. This device is designed for indoor use to automatically control lighting based on motion and ambient light levels. Please read this manual carefully before installation and operation to ensure proper function and safety.

ด้านหน้า view of the SEBSON recessed ceiling motion detector with key specifications overlaid: 8m/360° detection, up to 1000W LED, IP20, 10sec-30min timer, 3-2000 LUX, 230V.
รูปที่ 1: เกินview of the motion detector and its main features.

2. คำแนะนำด้านความปลอดภัย

  • การติดตั้งจะต้องดำเนินการโดยช่างไฟฟ้าที่มีคุณสมบัติตามข้อบังคับเกี่ยวกับสายไฟในท้องถิ่น
  • ตัดกระแสไฟที่เบรกเกอร์หลักก่อนทำการติดตั้งหรือบำรุงรักษา
  • Do not exceed the maximum load capacity of the detector (2000W for incandescent, 1000W for LED).
  • ผลิตภัณฑ์นี้ได้รับการออกแบบสำหรับใช้ภายในอาคารเท่านั้น หลีกเลี่ยงการสัมผัสกับความชื้นหรืออุณหภูมิที่สูงเกินไป
  • ตรวจสอบให้แน่ใจว่ามีการระบายอากาศที่เหมาะสมรอบๆ อุปกรณ์

3. คุณสมบัติของผลิตภัณฑ์

  • Indoor motion detector for recessed ceiling mounting.
  • Wide detection range of 8 meters and 360 degrees.
  • Adjustable operating duration from 10 seconds to 30 minutes.
  • Adjustable ambient light sensitivity from 3 to 2000 lux.
  • Compatible with LED lighting (max 1000W) and incandescent bulbs (max 2000W).
  • 3-wire connection for reliable operation.

4. เนื้อหาบรรจุภัณฑ์

  • 1x SEBSON Recessed Ceiling Motion Detector (Anthracite)
  • 1x คู่มือการใช้งาน

5. การติดตั้ง

สำคัญ: Ensure power is disconnected at the main circuit breaker before starting installation.

  1. Prepare a mounting hole in the ceiling with a diameter of 63-66 mm. Ensure there is sufficient depth (minimum 45 mm) for the detector.
  2. Connect the wiring according to the diagram below. The detector requires a 3-wire connection (Live, Neutral, Switched Live).
  3. Insert the detector into the prepared hole. The spring clips will secure it in place.
  4. เปิดเครื่องอีกครั้งแล้วทดสอบการทำงาน

5.1. สินค้าหมดview และขนาด

ด้านหน้า view of the SEBSON recessed ceiling motion detector in anthracite color.
รูปที่ 2 : ด้านหน้า view of the motion detector. This image shows the anthracite-colored circular housing with the central infrared sensor dome.
Technical drawing showing the dimensions of the motion detector: 75mm diameter, 42mm height, 60mm internal width, 34mm internal height, 31mm spring length, 3mm bezel thickness.
Figure 3: Detailed dimensions of the motion detector. The overall diameter is 75mm, and the height is 42mm. The mounting hole diameter should be between 63-66mm.
ด้านข้าง view diagram illustrating the recessed installation, showing a minimum installation depth of 45mm and a ceiling thickness of up to 20mm.
Figure 4: Installation depth requirement. A minimum depth of 45mm is needed for proper recessed mounting.
หลัง view of the motion detector showing the wiring terminal block and spring clips.
รูปที่ 5: ด้านหลัง view showing the wiring terminal. This is where the Live, Neutral, and Switched Live wires are connected.

6. การใช้งานและการปรับแต่ง

The motion detector features two adjustable dials on the back for 'TIME' (duration) and 'LUX' (light sensitivity).

หลัง view of the motion detector showing the 'TIME' and 'LUX' adjustment dials. The TIME dial ranges from 10s to 30min, and the LUX dial from 3 to 2000 lux.
Figure 6: Adjustment dials for TIME and LUX settings.

6.1. TIME Adjustment

ปุ่มหมุน 'เวลา' จะควบคุมระยะเวลาที่ไฟที่เชื่อมต่อจะยังคงติดอยู่หลังจากตรวจจับการเคลื่อนไหวได้แล้วและไม่มีการตรวจจับการเคลื่อนไหวเพิ่มเติมอีก หมุนปุ่มเพื่อตั้งระยะเวลาที่ต้องการ:

  • 10วินาที: Minimum duration (10 seconds).
  • 30 นาที: Maximum duration (30 minutes).

6.2. LUX Adjustment

The 'LUX' dial determines the ambient light level at which the detector will activate. This allows the light to only turn on when it's dark enough.

  • 3: Activates only in very dark conditions (e.g., night).
  • 2000: Activates in all light conditions (day and night).

To set the LUX level, turn the dial to the sun symbol (2000 lux) for testing during daylight. Once satisfied with the detection, adjust the dial towards the moon symbol (3 lux) to the desired ambient light level for automatic operation.

6.3. ระยะการตรวจจับ

Diagram showing the 360-degree detection area of the motion detector, with a maximum range of 8 meters and an installation height between 1.8m and 4m.
Figure 7: Detection range and angle. The detector covers a 360-degree area with a maximum range of 8 meters when installed at a height between 1.8m and 4m.

The detector has a 360° detection angle and a maximum range of 8 meters. Optimal installation height is between 1.8m and 4m. Avoid installing near heat sources, direct sunlight, or areas with significant air movement (e.g., air conditioning vents) to prevent false triggers.

7. การบำรุงรักษา

The SEBSON motion detector requires minimal maintenance. Ensure the sensor lens is kept clean and free from dust or obstructions. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.

8 การแก้ไขปัญหา

ปัญหา สาเหตุที่เป็นไปได้ สารละลาย
ไฟไม่เปิด
  • ไม่มีแหล่งจ่ายไฟ
  • LUX setting too low (too dark).
  • ไม่พบการเคลื่อนไหวภายในระยะ
  • สายไฟชำรุด
  • Check circuit breaker and connections.
  • Adjust LUX dial towards the sun symbol.
  • Ensure motion occurs within the detection zone.
  • ตรวจสอบการเชื่อมต่อสายไฟ
ไฟจะเปิดอยู่ตลอดเวลา
  • Continuous motion in detection zone.
  • การตั้งค่าเวลานานเกินไป
  • Wiring error (e.g., switched live permanently connected).
  • Clear detection zone of constant movement.
  • ปรับปุ่ม TIME ให้สั้นลง
  • ตรวจสอบสายไฟว่าต่อถูกต้องหรือไม่
ไฟเปิดขึ้นโดยที่ไม่เห็นการเคลื่อนไหวใดๆ
  • Heat sources (e.g., heater, direct sunlight).
  • Air currents (e.g., open window, AC vent).
  • Small animals.
  • Relocate detector or remove interfering objects.
  • Ensure stable environment.
  • Adjust sensitivity if possible (this model does not have explicit sensitivity adjustment, but careful placement can help).

9. ข้อมูลจำเพาะ

ยี่ห้อ เซบสัน
หมายเลขรุ่น IR_ES_EA
สี แอนทราไซต์
ขนาด (กว้าง x ยาว x สูง) 7.5 x 7.5 x 7.5 ซม.
น้ำหนัก 110 กรัม
ประเภทการติดตั้ง แบบฝัง (ฝ้าเพดาน)
เส้นผ่านศูนย์กลางของรูยึด 63-66 มม.
แหล่งพลังงาน ไฟฟ้ากระแสสลับ
โหลดสูงสุด (หลอดไส้) 2000 วัตต์
Max Load (LED/Energy Saving) 1000 วัตต์
ระยะการตรวจจับ 8 เมตร
มุมการตรวจจับ 360°
Operating Duration (TIME) 10 วินาที - 30 นาที
Ambient Light Sensitivity (LUX) 3 - 2000 ลักซ์
อุปกรณ์ที่รองรับ Basic lighting controls
การใช้ที่แนะนำ Residential security, commercial security, automation, energy management
ประเทศต้นกำเนิด จีน

10. การรับประกันและการสนับสนุน

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official SEBSON webไซต์นี้ โปรดเก็บหลักฐานการซื้อไว้เพื่อใช้ยืนยันการรับประกัน

© 2026 SEBSON สงวนลิขสิทธิ์

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.