SPLATRBALL SRB370

SPLATRBALL SRB370 Water Bead Blaster Kit Instruction Manual

Model: SRB370

1. บทนำ

The SPLATRBALL SRB370 Full Auto Water Bead Blaster is designed for outdoor recreational use, firing 7.5mm Splat-R-Ball water bead ammunition. This blaster features a 375-round internal reservoir and can shoot up to 7 rounds per second at a velocity of up to 135 feet per second. The water balls are soft, non-staining, and require virtually no cleanup, as they disintegrate on impact. This manual provides essential information for the safe and effective operation of your blaster.

Important Safety Note: Do not aim for eyes.

2. สิ่งที่รวมอยู่

Your SPLATRBALL SRB370 Blaster Kit includes the following components:

3. การตั้งค่า

  1. Prepare Water Beads:
    Place the 2,500 SplatRBall water beads in a container with plenty of water. Allow them to soak for at least 4 hours, or until they expand to 7.5mm in diameter. Ensure they are fully hydrated for optimal performance and to prevent jamming.
  2. ชาร์จแบตเตอรี่:
    Locate the USB charging port on the blaster. Connect the provided USB charging cable to the blaster and to a compatible USB power source (e.g., wall adapter, computer USB port). The battery is a rechargeable 7.4V 500 mAh unit. Allow sufficient time for a full charge before first use.
  3. Load Water Beads:
    Unscrew the cap from the internal reservoir on top of the blaster. Use the foldable water ball loading funnel to carefully pour the hydrated water beads into the reservoir. Ensure the reservoir is securely closed after loading.
  4. Attach Sling Clip (Optional):
    If desired, attach the sling clip to the designated attachment points on the blaster for easier carrying during play.
  5. สวมแว่นตานิรภัย:
    Always wear the provided safety glasses before operating the blaster to protect your eyes from stray water beads.
Image showing the ammo loading port on the SplatRBall SRB370 Blaster.

รูปที่ 1: ระยะใกล้ view of the ammo loading port on the SplatRBall SRB370 Blaster. The green tab indicates the opening for pouring water beads into the internal reservoir.

Image showing the rechargeable 7.4V 500mAh battery and USB charging cable.

Figure 2: The rechargeable 7.4V 500mAh battery and its accompanying USB charging cable, essential for powering the blaster.

Image showing the safety glasses included with the kit.

Figure 3: The safety glasses provided in the kit, crucial for eye protection during blaster operation.

4. คู่มือการใช้งาน

  1. เปิด/ปิดเครื่อง:
    Locate the power switch on the blaster. Slide the switch to the 'ON' position to activate the blaster.
  2. เลือกโหมดการยิง:
    The blaster features a two-position selector switch: 'Safe' and 'Full Auto'. Move the switch to 'Full Auto' for continuous firing. Ensure the switch is in 'Safe' mode when not in use.
  3. ยิง:
    Once powered on and in 'Full Auto' mode, press the trigger to fire water beads. The blaster will shoot approximately 7 water balls per second.
Image showing the selector switch on the SplatRBall SRB370 Blaster.

Figure 4: The selector switch on the side of the blaster, allowing users to choose between 'Safe' and 'Full Auto' firing modes.

5. การบำรุงรักษา

6 การแก้ไขปัญหา

7. ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
หมายเลขรุ่น950007
ประเภทกระสุน7.5mm SplatRBall Water Beads
ความจุของอ่างเก็บน้ำ375 Rounds (Internal)
อัตราการยิงสูงสุด 7 รอบต่อวินาที
ความเร็วUp to 135 feet per second
แบตเตอรี่Rechargeable 7.4V 500 mAh Lithium Ion
การชาร์จไฟUSB Charging Cable (Included)
โหมดการทำงานอัตโนมัติเต็มรูปแบบ
วัสดุพลาสติก
สีสีขาว
น้ำหนักสินค้า2 ปอนด์
ขนาดรายการ (ยาว x กว้าง x สูง)ยาว 16 นิ้ว x กว้าง 2.63 นิ้ว x สูง 8.5 นิ้ว

8. คำเตือนด้านความปลอดภัย

9. การรับประกันและการสนับสนุน

For warranty information, product support, or to purchase additional accessories and water beads, please visit the official SPLATRBALL webหรือติดต่อฝ่ายบริการลูกค้าโดยตรง โปรดเก็บหลักฐานการซื้อไว้เพื่อใช้ในกรณีที่ต้องการเคลมประกัน

SPLATRBALL Official Store: Visit the SPLATRBALL Store