1. บทนำ
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Partayoza 1204 Series Motor Controller. Please read this manual thoroughly before attempting any installation or operation. Retain this manual for future reference.
2. ข้อมูลด้านความปลอดภัย
Always observe the following safety precautions to prevent personal injury or damage to the controller or vehicle:
- Disconnect the vehicle's battery pack before performing any work on the controller or wiring.
- Ensure proper polarity when connecting the battery and motor leads. Incorrect wiring can cause severe damage.
- สวมใส่อุปกรณ์ป้องกันส่วนบุคคล (PPE) ที่เหมาะสม รวมถึงแว่นตานิรภัยและถุงมือกันความร้อน
- Avoid touching electrical components while the system is powered.
- Only qualified personnel should attempt installation or service.
- Do not operate the controller if it shows signs of damage or malfunction.
3. สินค้าหมดview
The Partayoza 1204 Series Motor Controller is a high-performance DC series motor controller designed for electric vehicles, specifically compatible with Club Car DS golf carts (1996-Up models). It is pre-set for a 5K-0Ω throttle type and operates at 48V with a current rating of 325A. This controller is a direct replacement for Curtis 1204-410 (225A 48V 5K-0Ω) and Curtis 1204-412 (300A 48V 5K-0Ω) models.
The controller features a rugged anodized aluminum extruded housing, meeting IP65 environmental sealing standards, making it suitable for use in harsh environments.
Figure 1: Partayoza 1204 Series Motor Controller. This image displays the robust design of the controller, highlighting its suitability for various applications.
รูปที่ 2: ด้านบน view of the Partayoza 1204 Series Motor Controller, showing the product label with specifications. The label indicates a part number of 17720713, voltage range of 36-48V, current of 325A, model P124M-5305, and serial number 22033C.013973.
รูปที่ 3: ระยะใกล้ view of the controller's terminals, showing the connection points for power and motor leads.
4. ข้อมูลจำเพาะ
| คุณสมบัติ | ข้อมูลจำเพาะ |
|---|---|
| แบบอย่าง | 1204 Series (Model 1204M:173) |
| แทนที่หมายเลขชิ้นส่วน | 1204, 1204-410, 1204-411, 101840201, 1204-412 |
| รุ่นที่ใช้งานได้ | Club Car DS (Years 1996-Up) |
| ปริมาณแบตเตอรี่tage | 48V (default setting), compatible with 36V systems |
| คะแนนปัจจุบัน | 325A (การตั้งค่าเริ่มต้น) |
| ประเภทคันเร่ง | 5K-0Ω (default setting), adjustable to 0-5KΩ or 0-5V |
| การปิดผนึกสิ่งแวดล้อม | IP65 |
| วัสดุที่ใช้ทำตัวเรือน | อลูมิเนียมอโนไดซ์ |
| ขนาด (กว้าง x ยาว x สูง) | 146มม. x 133.3มม. x 77มม. |
Figure 4: Dimensional drawing of the Partayoza 1204 Series Motor Controller in millimeters.
5. การตั้งค่าและการติดตั้ง
Proper installation is crucial for the safe and reliable operation of the motor controller. Refer to the wiring diagram below and follow these steps:
- ถอดแบตเตอรี่: Before starting, ensure the vehicle's battery pack is completely disconnected to prevent electrical shock or damage.
- ตัวควบคุมการติดตั้ง: Securely mount the controller in a location that allows for adequate ventilation and protection from physical damage.
- การเชื่อมต่อสายไฟ: Carefully connect all wires according to the provided wiring diagram. Pay close attention to polarity for battery (B+, B-) and motor (A1, A2, F1, F2) connections. Ensure all connections are tight and secure.
- การเชื่อมต่อคันเร่ง: Connect the throttle input wires to the appropriate terminals. The controller is pre-set for a 5K-0Ω throttle.
- การเชื่อมต่ออุปกรณ์เสริม: Connect any auxiliary components such as the keyswitch, interlocks, and pedal microswitch as shown in the diagram.
- ตรวจสอบการเชื่อมต่อ: Double-check all wiring against the diagram before reconnecting the battery.
- เชื่อมต่อแบตเตอรี่อีกครั้ง: Once all connections are verified, carefully reconnect the battery pack.
Figure 5: General wiring diagram for the 1204 Series Motor Controller. This diagram illustrates the connections for the battery, motor, throttle, keyswitch, interlocks, and pedal microswitch. Note the precharge resistor and polarity protection diode in the power wiring circuit.
6. คู่มือการใช้งาน
The controller is factory-set to 48V / 325A / 5K-0Ω throttle. For basic operation, no further adjustments are typically needed if your vehicle matches these specifications.
6.1 การเพิ่มพลังเริ่มต้น
- Ensure all safety precautions are followed and the battery is connected.
- Turn the vehicle's keyswitch to the ON position.
- Slowly depress the accelerator pedal to test motor response. The vehicle should move smoothly.
6.2 การปรับค่าพารามิเตอร์
The controller's parameters, such as acceleration, High Pedal Disable (HPD), voltage, plugging, and throttle input type, can be adjusted using a Curtis 1313-3301 handheld programmer. This allows for customization to suit specific vehicle requirements or different throttle inputs (e.g., 8 other throttle inputs).
บันทึก: If your motor controller is not 48V / 5K-0Ω / 200A (or 300A), or if you are unsure about compatibility, please consult a qualified technician or contact customer support before making any modifications.
7. การบำรุงรักษา
Regular maintenance ensures the longevity and optimal performance of your motor controller:
- รักษาความสะอาด: Periodically clean the exterior of the controller to remove dirt, dust, and debris. Use a dry, soft cloth. Do not use harsh chemicals or solvents.
- ตรวจสอบการเชื่อมต่อ: Regularly check all electrical connections for tightness and corrosion. Loose or corroded connections can lead to overheating and poor performance.
- ตรวจสอบสายไฟ: Inspect wiring for any signs of wear, fraying, or damage. Replace damaged wires immediately.
- การระบายอากาศ : Ensure the controller's mounting location allows for proper airflow to prevent overheating.
- การปกป้องสิ่งแวดล้อม: While the controller is IP65 rated, avoid prolonged exposure to extreme moisture or direct water spray if possible.
8 การแก้ไขปัญหา
If you experience issues with your motor controller, refer to the following common troubleshooting steps:
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| คอนโทรลเลอร์ไม่ตอบสนอง | No power, faulty keyswitch, loose connections | ตรวจสอบปริมาณแบตเตอรี่tage, inspect keyswitch, verify all wiring connections. |
| มอเตอร์ทำงานเป็นระยะ | Loose motor connections, faulty throttle, overheating | Inspect motor wiring, test throttle output, ensure adequate ventilation. |
| รถเคลื่อนที่ช้าหรือกำลังไม่เพียงพอ | ปริมาณแบตเตอรี่ต่ำtage, incorrect controller settings, motor issue | Charge batteries, verify controller settings with a programmer, inspect motor. |
| Controller gets excessively hot | Overload, poor ventilation, loose connections | Reduce load, improve ventilation, tighten all power connections. |
For complex issues or if troubleshooting steps do not resolve the problem, it is recommended to consult a certified technician or contact Partayoza customer support.
9. การรับประกันและการสนับสนุน
For warranty information, technical support, or to inquire about replacement parts, please contact Partayoza customer service through the retailer where the product was purchased or visit the official Partayoza website. When contacting support, please have your product model (1204 Series) and serial number (e.g., 22033C.013973) available.