JEYI I9-Seal

JEYI I9-Seal M.2 NVMe SSD Enclosure User Manual

Model: I9-Seal

การแนะนำ

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JEYI I9-Seal M.2 NVMe SSD Enclosure. This device converts an NVMe M.2 solid-state drive into a portable external storage solution with high-speed USB 3.2 Gen 2 connectivity.

เนื้อหาแพ็คเกจ

โปรดตรวจสอบว่ารายการทั้งหมดที่ระบุไว้ด้านล่างมีอยู่ในแพ็คเกจของคุณหรือไม่:

  • JEYI M.2 NVMe SSD Enclosure
  • แผ่นความร้อน
  • ไขควง
  • USB-A to USB-C Cable (10Gbps)
  • USB-C to USB-C Cable (10Gbps)
  • สายคล้องคอ
JEYI I9-Seal M.2 NVMe SSD Enclosure package contents
Image: Contents of the JEYI I9-Seal M.2 NVMe SSD Enclosure package, showing the enclosure, two cables, thermal pads, a screwdriver, and a lanyard.

คำแนะนำการตั้งค่า

Follow these steps to install your NVMe M.2 SSD into the JEYI I9-Seal enclosure:

  1. เตรียมสิ่งที่แนบมา: Gently slide open the enclosure to reveal the internal PCB.
  2. การใช้แผ่นระบายความร้อน: Peel off the protective films from both sides of a thermal pad and carefully place it onto the NVMe SSD chip area. This aids in heat dissipation.
  3. ใส่ SSD NVMe: Align your NVMe M.2 SSD (2280 form factor only) with the M-Key slot on the PCB. Insert the SSD firmly but gently into the slot at an angle.
  4. รักษาความปลอดภัย SSD: Once inserted, gently push down the SSD and secure it with the provided screw using the included screwdriver. Ensure the SSD is flat and securely fastened.
  5. ปิดสิ่งที่แนบมา: Carefully slide the enclosure cover back into place until it clicks securely.
ระเบิด view of JEYI I9-Seal M.2 NVMe SSD Enclosure showing internal components and thermal pad placement
Image: An exploded diagram illustrating the internal structure of the enclosure, including the aluminum alloy case, heat dissipation shell, thermal pad, and screw, demonstrating how to assemble the SSD within the enclosure.
Diagram showing compatibility with M.2 2280 NVMe SSDs only
Image: A visual guide indicating that the enclosure is compatible exclusively with M.2 2280 NVMe SSDs, with other sizes (2230, 2242, 2260) marked as incompatible.

คำแนะนำการใช้งาน

Once your NVMe SSD is securely installed, connect the enclosure to your device:

  1. เชื่อมต่อกับอุปกรณ์: Use either the provided USB-C to USB-C cable or the USB-A to USB-C cable to connect the enclosure to a compatible USB port on your computer, smartphone, tablet, or game console.
  2. ไฟแสดงสถานะพลังงาน: A small LED indicator on the enclosure will illuminate, signifying that the device is powered on and connected.
  3. Disk Recognition: Your operating system (Windows, macOS, Linux, Android, iOS) should automatically detect the new storage device. If it's a new SSD, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.
  4. การถ่ายโอนข้อมูล: You can now perform data backup, file transfers, disk upgrades, data recovery, or use it for storage expansion. The enclosure supports USB 3.2 Gen 2 speeds up to 10Gbps.
JEYI I9-Seal M.2 NVMe SSD Enclosure connected to various devices like laptop, smartphone, and tablet
Image: The JEYI I9-Seal enclosure connected to a laptop, smartphone, and tablet, demonstrating its wide compatibility with Windows, Linux, and Mac OS 8.0 and above systems, including Thunderbolt compatibility.
Comparison of USB data transfer speeds, highlighting 10Gbps for USB 3.2 Gen 2
Image: A graphic illustrating data transfer speeds, showing USB 2.0 at 480Mbps, USB 3.0 (USB 3.2 Gen 1) at 5Gbps, and USB 3.1 (USB 3.2 Gen 2) at 10Gbps, emphasizing the enclosure's high-speed capability for NVMe drives.

การซ่อมบำรุง

To ensure optimal performance and longevity of your JEYI I9-Seal enclosure:

  • การจัดการความร้อน: อลูมิเนียม casing and thermal pads are designed for efficient heat dissipation. During prolonged high-speed data transfers, the enclosure may become warm to the touch. This is normal and indicates effective heat transfer from the SSD.
  • การทำความสะอาด: ใช้ผ้านุ่มและแห้งเช็ดทำความสะอาดภายนอกตัวเครื่อง หลีกเลี่ยงการใช้น้ำยาทำความสะอาดหรือตัวทำละลาย
  • พื้นที่จัดเก็บ: เมื่อไม่ได้ใช้งาน ให้เก็บกล่องไว้ในที่แห้งและเย็น หลีกเลี่ยงแสงแดดโดยตรงและอุณหภูมิที่สูงหรือต่ำเกินไป
  • การดูแลสายเคเบิล: Handle the USB cables carefully. Avoid sharp bends or excessive pulling to prevent damage.

การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
คอมพิวเตอร์ตรวจไม่พบอุปกรณ์ดังกล่าว
  • การเชื่อมต่อสายเคเบิลหลวม
  • ไม่ได้ติดตั้ง SSD อย่างถูกต้อง
  • SSD ยังไม่ได้เริ่มต้นใช้งาน/ฟอร์แมต
  • พอร์ต USB หรือสาย USB มีปัญหา
  • ตรวจสอบให้แน่ใจว่าสายเคเบิลเชื่อมต่ออย่างแน่นหนา
  • Re-open enclosure and verify SSD is seated correctly and screwed in.
  • Check Disk Management (Windows) or Disk Utility (macOS) to initialize and format the SSD.
  • ลองใช้พอร์ต USB หรือสายเคเบิลอื่น
ความเร็วในการถ่ายโอนข้อมูลช้า
  • เชื่อมต่อกับพอร์ต USB ที่ความเร็วต่ำกว่า (เช่น USB 2.0)
  • Thermal throttling due to high temperature.
  • ข้อจำกัดด้านประสิทธิภาพของ SSD
  • Connect to a USB 3.2 Gen 2 (10Gbps) compatible port.
  • Ensure thermal pads are correctly installed. Allow the enclosure to cool if it becomes excessively hot.
  • ตรวจสอบความเร็วที่ระบุไว้ของ NVMe SSD ของคุณ
Enclosure gets very hot.
  • การทำงานปกติระหว่างการถ่ายโอนข้อมูลปริมาณมาก
  • Ineffective thermal pad contact.
  • This is expected as the aluminum casing ช่วยระบายความร้อน
  • Ensure thermal pads are correctly positioned and making good contact with the SSD and enclosure.

ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
แบบอย่างI9-Seal
ยี่ห้อเจยี
ฮาร์ดแวร์อินเตอร์เฟซพอร์ต USB 3.2 เจนเนอเรชั่น 2 (USB-C)
อัตราการถ่ายโอนข้อมูลสูงสุดถึง 10 Gbps
ประเภท SSD ที่ใช้งานร่วมกันได้NVMe M.2 (PCI-E M-Key)
Supported SSD Form Factor2280 (80mm) only
ความจุในการจัดเก็บสูงสุด4TB
ชิปเซ็ตJMS583 A3
คุณสมบัติUASP Support, TRIM Support, Win to Go (WTG) Support
วัสดุโลหะผสมอลูมิเนียม
สีเงิน
ขนาดสินค้า4.06 x 1.02 x 0.39 นิ้ว (103 x 26 x 10 มม.)
น้ำหนักสินค้า0.317 ออนซ์ (9 กรัม)
ระบบปฏิบัติการที่รองรับWindows, macOS, ลินุกซ์, iOS, Android
Diagram of the JMS583 A3 master chip
Image: A detailed illustration of the JMS583 A3 master chip, which is integrated into the enclosure for stable and high-speed data transmission up to 10Gbps.

การรับประกันและการสนับสนุน

For warranty information or technical support, please refer to the official JEYI webดูรายละเอียดเพิ่มเติมได้ที่เว็บไซต์หรือติดต่อฝ่ายบริการลูกค้าโดยตรง โดยปกติแล้วรายละเอียดเกี่ยวกับระยะเวลาการรับประกันและช่องทางการสนับสนุนจะระบุไว้ในเอกสารการซื้อหรือในเว็บไซต์ของผู้ผลิต webเว็บไซต์.

ผู้ผลิต: เจยี

Webเว็บไซต์: Visit the JEYI Store on Amazon

© 2025 JEYI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.