T.I.P. Maxima 350 IPX DUO 30274

T.I.P. Maxima 350 IPX DUO 30274 Dirty Water Pump Instruction Manual

Model: Maxima 350 IPX DUO 30274 | Brand: T.I.P.

1. บทนำ

The T.I.P. Maxima 350 IPX DUO is a powerful and versatile combination submersible pump designed for various water drainage tasks. Its extendable pump base allows for quick conversion between a high-performance dirty water pump and a clean water pump with ultra-flat suction. This manual provides essential information for safe and efficient operation, setup, and maintenance of your pump.

T.I.P. Maxima 350 IPX DUO Dirty Water Pump

Image: The T.I.P. Maxima 350 IPX DUO pump, showcasing its robust design and components.

2. คำแนะนำด้านความปลอดภัย

โปรดอ่านและทำความเข้าใจคำแนะนำด้านความปลอดภัยทั้งหมดก่อนใช้งานปั๊ม การไม่ปฏิบัติตามคำแนะนำเหล่านี้อาจส่งผลให้เกิดไฟฟ้าช็อต ไฟไหม้ การบาดเจ็บร้ายแรง หรือความเสียหายต่อทรัพย์สิน

  • ควรตัดการเชื่อมต่อปั๊มออกจากแหล่งจ่ายไฟทุกครั้งก่อนดำเนินการบำรุงรักษาหรือทำความสะอาดใดๆ
  • Ensure the power cable and plug are in perfect condition. Do not use if damaged.
  • The pump is designed for pumping water only. Do not use it for flammable, corrosive, or explosive liquids.
  • Do not operate the pump in swimming pools or areas where people are in the water.
  • ให้เด็กและบุคคลที่ไม่ได้รับอนุญาตอยู่ห่างจากพื้นที่ปฏิบัติงาน
  • ตรวจสอบให้แน่ใจว่ามีการระบายอากาศที่เหมาะสมเมื่อทำงานในพื้นที่ปิด
  • The maximum liquid temperature for operation is 35 °C.

3. เนื้อหาบรรจุภัณฑ์

ตรวจสอบว่ามีรายการทั้งหมดอยู่ในแพ็คเกจ:

  • T.I.P. Maxima 350 IPX DUO Submersible Pump with connection cable
  • Connection elbow with union nut
  • Multi-dimensional connection piece
  • คู่มือการใช้งาน

4. การตั้งค่า

4.1 การต่อท่อระบายน้ำ

The pump features a 47.80 mm (1.5 inch external thread) pressure connection. Use the provided connection elbow and multi-dimensional connection piece to attach your discharge hose.

  • ตัวเลือกที่ 1: Hose with Ø 40 mm. Secure with a hose clamp.
  • ตัวเลือกที่ 2: Hose with 1 1/4" internal thread. Remove the upper part of the connector.
  • ตัวเลือกที่ 3: Hose with Ø 32 mm. Secure with a hose clamp.
  • ตัวเลือกที่ 4: Hose with 1" internal thread. Remove the upper part of the connector.
  • ตัวเลือกที่ 5: Hose with 1 1/2" internal thread. Use the supplied connection elbow.
Connection sizes for T.I.P. Maxima 350 IPX DUO pump

Image: Diagram showing various hose connection options and sizes for the pump.

Connection elbow for T.I.P. Maxima 350 IPX DUO pump

Image: The supplied connection elbow for attaching a 1 1/2" internal thread hose.

An optional C-Storz coupling can also be used for the discharge hose (not included).

4.2 Adjusting the Pump Base for Water Type

The Maxima 350 IPX DUO features an extendable pump base to switch between dirty water and clean water modes.

  • Dirty Water Mode: For water with particle sizes up to 30 mm. The pump base is extended, allowing for a residual water level of 35 mm.
  • Clean Water Mode (Flat Suction): For clear water with particle sizes up to 1 mm. The pump base is retracted, enabling an ultra-flat suction down to 1 mm residual water level.
T.I.P. Maxima 350 IPX DUO pump with extendable base

Image: The T.I.P. Maxima 350 IPX DUO pump, highlighting its extendable pump base for different water types.

T.I.P. Maxima 350 IPX DUO pump in dirty water

Image: The pump operating in dirty water, showing the water level at 125 mm for activation.

T.I.P. Maxima 350 IPX DUO pump with 35mm residual dirty water

Image: The pump after draining dirty water, showing a residual water level of 35 mm.

T.I.P. Maxima 350 IPX DUO pump in clean water

Image: The pump operating in clean water, showing the water level at 100 mm for activation.

T.I.P. Maxima 350 IPX DUO pump with 1mm residual clean water

Image: The pump after draining clean water, showing an ultra-flat residual water level of 1 mm.

T.I.P. Maxima 350 IPX DUO pump particle size

Image: Illustration of the maximum particle sizes the pump can handle: 1 mm for clear water and 30 mm for dirty water.

4.3 การปรับสวิตช์ลูกลอย

The pump is equipped with a variable adjustable float switch for automatic operation. The switch points depend on whether the pump is configured for clean or dirty water.

  • Clean Water Mode: Switch-on point at 24 cm, switch-off point at 14 cm.
  • Dirty Water Mode: Switch-on point at 27.5 cm, switch-off point at 17.5 cm.
T.I.P. Maxima 350 IPX DUO clean water float switch settings

Image: Diagram illustrating the float switch activation and deactivation points for clean water pumping.

T.I.P. Maxima 350 IPX DUO dirty water float switch settings

Image: Diagram illustrating the float switch activation and deactivation points for dirty water pumping.

5. การใช้งานปั๊ม

Once the pump is set up with the correct hose and pump base configuration for your application, plug it into a suitable power outlet (230V). The float switch will automatically activate the pump when the water level reaches the switch-on point and deactivate it when it drops to the switch-off point.

ปั๊มเหมาะสำหรับ:

  • Pumping and draining clear water.
  • Pumping dirty water with particle sizes up to 30 mm.
  • Dry drainage down to 1 mm.
  • Emergency dewatering during floods.
T.I.P. Maxima 350 IPX DUO pump in construction site and flooded basement

Image: The pump being used in a construction pit and for draining a flooded basement, demonstrating its versatility.

5.1 เส้นโค้งประสิทธิภาพ

The transport curve illustrates the relationship between the delivery head (Opvoerhoogte [m]) and the flow rate (Stroomsnelheid Q [m³/u]). This helps in understanding the pump's performance under different conditions.

T.I.P. Maxima 350 IPX DUO pump performance curve

Image: Graph showing the pump's performance curve, detailing flow rate versus head height.

5.2 Vortex Impeller

The pump is equipped with a vortex impeller, which helps prevent clogging and ensures low-maintenance operation, especially when handling dirty water.

T.I.P. Maxima 350 IPX DUO pump vortex impeller details

ภาพ: รายละเอียด view of the pump's components, including the vortex impeller designed to prevent clogging.

6. การบำรุงรักษา

Regular maintenance ensures the longevity and optimal performance of your T.I.P. Maxima 350 IPX DUO pump.

  • การทำความสะอาด: After each use, especially with dirty water, rinse the pump with clean water to remove any debris.
  • การตรวจสอบ: Periodically check the power cable, plug, and float switch for any signs of damage.
  • พื้นที่จัดเก็บ: ควรเก็บปั๊มไว้ในที่แห้งและปราศจากน้ำแข็งเมื่อไม่ได้ใช้งานเป็นเวลานาน
  • การตรวจสอบใบพัด: If performance drops, check the impeller for blockages or wear.

7 การแก้ไขปัญหา

หากคุณพบปัญหาเกี่ยวกับปั๊ม โปรดดูขั้นตอนการแก้ไขปัญหาทั่วไปต่อไปนี้:

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
ปั๊มไม่ทำงานNo power supply; Float switch not activated; Impeller blocked.Check power connection; Ensure water level is above switch-on point; Clean impeller.
กำลังสูบน้ำลดลงHose kinked or blocked; Impeller partially blocked; Pump base clogged.Check and clear hose; Clean impeller and pump base.
ปั๊มทำงานอย่างต่อเนื่องFloat switch stuck or faulty; Water level not dropping below switch-off point.Check float switch for obstructions; Ensure proper water drainage.

If the problem persists, contact T.I.P. customer support or a qualified technician.

8. ข้อมูลจำเพาะ

คุณสมบัติค่า
ผู้ผลิตT.I.P.
หมายเลขรุ่น30274
ขนาดสินค้า16.9 x 19.8 x 39.1 ซม.
น้ำหนัก7 กก.
วัสดุStainless Steel (Acier inoxydable)
แหล่งพลังงานสายไฟ
เล่มที่tage230 โวลต์
วัดtage800 วัตต์
อัตราการไหลสูงสุด20,000 ลิตรต่อชั่วโมง
ความสูงสูงสุดของศีรษะ8 เมตร
ความลึกการจมน้ำสูงสุด7 เมตร
ขนาดอนุภาคสูงสุด30 mm (dirty water) / 1 mm (clean water)
Minimum Suction Height35 mm (dirty water) / 1 mm (clean water)
อุณหภูมิกลางสูงสุด35 องศาเซลเซียส
ความยาวของสายเคเบิลเชื่อมต่อ10 m, H07RN8-F
การเชื่อมต่อแรงดัน47.80 mm (1.5 inch external thread)

9. วิดีโอผลิตภัณฑ์อย่างเป็นทางการ

Watch these official videos for additional guidance on using your T.I.P. pump.

T.I.P. Extrema 300/10 Pro Waste Water Submersible Pump

Video: This video demonstrates the features and operation of the T.I.P. Extrema 300/10 Pro, a similar waste water submersible pump, providing a visual guide to handling and usage.

10. การรับประกันและการสนับสนุน

T.I.P. provides high-quality and durable products. For any issues or questions regarding your Maxima 350 IPX DUO pump, please refer to the warranty information provided with your purchase or contact T.I.P. customer support.

T.I.P. offers a 10-year guarantee on the availability of spare parts, ensuring long-term support for your product.

10 year spare parts availability guarantee

Image: T.I.P. guarantees 10 years of spare parts availability for their products.

© 2024 T.I.P. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.