เรียวบิ P727

Ryobi P727 One+ 18 Volt 950 Lumen LED Work Light

คู่มือการใช้งาน

การแนะนำ

Thank you for choosing the Ryobi P727 One+ 18 Volt 950 Lumen LED Work Light. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new work light. Please read these instructions carefully before use and retain them for future reference.

ข้อมูลด้านความปลอดภัยที่สำคัญ

Always observe basic safety precautions when using electrical tools and equipment to reduce the risk of fire, electric shock, and personal injury.

  • อ่านคำแนะนำทั้งหมด: Familiarize yourself with the controls and proper use of the work light.
  • Use appropriate battery: This work light is designed for use with Ryobi 18V One+ batteries (sold separately). Do not attempt to use other battery types.
  • Avoid direct eye exposure: อย่าจ้องมองไฟ LED โดยตรง
  • ห้ามปฏิบัติงานในบรรยากาศที่อาจระเบิดได้: Do not use the light in the presence of flammable liquids, gases, or dust.
  • เก็บให้ห่างจากเด็ก: สินค้านี้ไม่ใช่ของเล่น ควรเก็บให้พ้นมือเด็ก
  • จัดเก็บอย่างถูกต้อง: When not in use, store the light in a dry, secure place away from moisture and extreme temperatures.

เนื้อหาแพ็คเกจ

ตรวจสอบว่ามีสิ่งของทั้งหมดอยู่ครบเมื่อแกะกล่อง:

  • Ryobi P727 One+ 18 Volt 950 Lumen LED Work Light (Light Only)

บันทึก: Ryobi 18V One+ batteries and chargers are sold separately.

การตั้งค่า

การติดตั้งแบตเตอรี่

  1. ตรวจสอบให้แน่ใจว่าได้ปิดไฟส่องสว่างในพื้นที่ทำงานแล้ว
  2. Align the ribs on the battery with the grooves in the work light's battery port.
  3. เลื่อนแบตเตอรี่เข้าไปในพอร์ตจนกระทั่งล็อคเข้าที่อย่างแน่นหนา
  4. To remove the battery, press the latch on the battery pack and slide it out.

The Ryobi P727 is compatible with all Ryobi 18V One+ batteries, including models such as P100, P101, P102, P103, P104, P105, P107, and P108.

คำแนะนำการใช้งาน

Turning On/Off and Adjusting Light Output

The work light features two LED banks for versatile illumination. A power button controls the light output.

  1. Press the power button once to illuminate one LED bank.
  2. Press the power button a second time to illuminate both LED banks for maximum brightness (950 lumens).
  3. Press the power button a third time to turn the light off.

การปรับหัวไฟ

The light head can rotate up to 270 degrees, allowing you to direct light precisely where needed. Gently pivot the light panels around the central axis to achieve the desired angle.

Ryobi P727 work light angled upwards

Image: The Ryobi P727 work light shown with its head angled upwards, demonstrating its rotational capability.

Ryobi P727 work light in a vertical position

Image: The Ryobi P727 work light standing upright with its head fully extended vertically.

Using Hanging Options

The work light includes multiple integrated hanging options for convenience:

  • Pull-out Hook: Located at the top of the light, this hook can be extended to hang the light from pipes, wires, or other suitable structures.
  • Nail Pegs: Integrated slots allow the light to be mounted on nails or screws.
  • Hanging Brackets: Additional brackets provide further mounting flexibility.
Man using Ryobi P727 work light under a car

Image: A man positioned under a car, using the Ryobi P727 work light to illuminate the underside of the vehicle, demonstrating its utility in tight spaces.

Man working on car engine with Ryobi P727 work light

Image: A man wearing safety glasses, leaning over a car engine, with the Ryobi P727 work light illuminating the engine bay from above.

Man working on electrical panel with Ryobi P727 work light

Image: A man working on an electrical panel in a dimly lit room, with the Ryobi P727 work light providing bright illumination to the work area.

อายุการใช้งานแบตเตอรี่

When using a 4AH Ryobi 18V One+ battery, the work light can provide illumination for up to 9 hours.

การซ่อมบำรุง

การทำความสะอาด

  • ควรถอดแบตเตอรี่ออกทุกครั้งก่อนทำความสะอาด
  • ใช้ของสะอาดดamp cloth to wipe down the exterior of the work light. Do not use harsh chemicals or abrasive cleaners.
  • Keep the LED lenses clean for optimal light output.

พื้นที่จัดเก็บ

  • Store the work light in a dry, cool place, away from direct sunlight and moisture.
  • Remove the battery from the light if storing for extended periods.

การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
ไฟไม่เปิดแบตเตอรี่ไม่ได้รับการติดตั้งอย่างถูกต้องหรือหมดประจุตรวจสอบให้แน่ใจว่าแบตเตอรี่เสียบแน่นดีแล้ว ชาร์จหรือเปลี่ยนแบตเตอรี่
แสงสว่างสลัวๆแบตเตอรี่ชาร์จจนหมดชาร์จหรือเปลี่ยนแบตเตอรี่
Light head does not rotate smoothly.Debris or obstruction in the pivot mechanism.Inspect and clear any obstructions. Do not force rotation.

ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
หมายเลขรุ่นP727
เล่มที่tage18 Volt (Ryobi One+ System)
เอาท์พุตแสงถึง 950 ลูเมนส์
การหมุน270 องศา
ประเภทแหล่งกำเนิดแสงนำ
วัสดุเหล็กอัลลอยด์
สีสีเขียว
Approximate Dimensions (Folded)ขนาด 16.25 นิ้ว สูง x 6 นิ้ว กว้าง x 3.88 นิ้ว ลึก
Ryobi P727 work light with dimensions labeled

Image: The Ryobi P727 work light shown with its approximate dimensions: 16.25 inches height, 6 inches width, and 3.88 inches depth.

การรับประกันและการสนับสนุน

For warranty information, service, or technical support, please refer to the warranty card included with your product or visit the official Ryobi webไซต์ โปรดเก็บใบเสร็จรับเงินไว้เป็นหลักฐานการซื้อสำหรับการเรียกร้องการรับประกัน

Webเว็บไซต์: www.ryobitools.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.