การแนะนำ
This manual provides essential instructions for the installation, operation, and maintenance of your Cisa Astral S Euro Cylinder 40-40 NP. Please read these instructions carefully before proceeding with installation or use to ensure proper function and security.
ข้อมูลด้านความปลอดภัย
- สวมอุปกรณ์ป้องกันภัยส่วนบุคคล (PPE) ที่เหมาะสมเสมอในระหว่างการติดตั้ง เช่น แว่นตานิรภัยและถุงมือ
- Ensure the door and frame are in good condition and properly aligned before installing the cylinder.
- Do not attempt to modify the cylinder or its components, as this may compromise security and void the warranty.
- Keep keys in a secure location and do not leave them unattended.
เนื้อหาแพ็คเกจ
ตรวจสอบว่ามีรายการทั้งหมดอยู่ในแพ็คเกจ:
- 1 x Cisa Astral S Euro Cylinder 40-40 NP
- กุญแจ 3 ดอก
- 1 x สกรูยึด
Image: The Cisa Astral S Euro Cylinder, showing its nickel-plated finish and the three accompanying keys.
คำแนะนำในการติดตั้ง
Follow these steps to install the Cisa Astral S Euro Cylinder:
- เตรียมประตู: Ensure the existing lock case is clear and free of debris. If replacing an old cylinder, remove it by unscrewing the retaining screw located on the door edge, usually below the latch or bolt.
- Measure the Cylinder: The Cisa Astral S Euro Cylinder has a length of 79mm (40-40 NP, meaning 40mm from the center of the cam to one end, and 40mm to the other, with a 1mm cam). Verify this matches your door's requirements.
- ใส่กุญแจ: Insert one of the supplied keys into the cylinder and turn it slightly (approximately 15-20 degrees) to align the cam with the cylinder body. This allows the cam to retract into the cylinder, enabling insertion into the lock case.
- ใส่กระบอกเข้าไป: Slide the cylinder into the lock case from the side of the door where the retaining screw was removed. Ensure it sits flush with the door handles or escutcheons on both sides.
- ยึดกระบอกให้แน่น: Insert the fixing screw through the screw hole on the door edge and tighten it into the threaded hole in the center of the cylinder. Do not overtighten, as this can damage the cylinder or lock case.
- การดำเนินการทดสอบ: With the door open, insert the key from both sides and turn it to ensure the lock mechanism operates smoothly. The clutch cam allows operation even if a key is left in the other side.
คำแนะนำการใช้งาน
To lock or unlock the Cisa Astral S Euro Cylinder:
- ใส่รหัส: Insert the correct key fully into the keyway on either side of the cylinder.
- เทิร์นคีย์: Turn the key clockwise or counter-clockwise to engage or disengage the lock mechanism. The direction depends on whether you are locking or unlocking and the orientation of your lock case.
- ลบกุญแจ: Once the lock is engaged or disengaged, return the key to its vertical position before removing it.
บันทึก: The Astral S features a clutch cam, allowing the cylinder to be operated from the outside even if a key is left inserted on the inside.
การซ่อมบำรุง
Proper maintenance ensures the longevity and smooth operation of your cylinder:
- การทำความสะอาด: Clean the exterior of the cylinder with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- การหล่อลื่น: If the key becomes stiff or difficult to turn, apply a small amount of graphite-based lubricant or a specialized lock lubricant into the keyway. Do not use oil-based lubricants, as they can attract dirt and cause blockages.
- การดูแลที่สำคัญ: Avoid bending or damaging the keys. Store spare keys securely.
การแก้ไขปัญหา
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| Key difficult to insert or turn | Dirt or debris in keyway; lack of lubrication; bent key. | Apply lock lubricant. Check key for damage. Do not force the key. |
| Cylinder does not turn after installation | Cylinder not properly aligned; retaining screw overtightened. | Loosen retaining screw slightly and re-test. Ensure cam is aligned. |
| กุญแจหมุนได้ แต่ตัวล็อกไม่ทำงาน/ไม่ปลดล็อก | Internal lock mechanism issue (not cylinder); incorrect cylinder size. | Consult a locksmith or qualified professional. Verify cylinder length. |
ข้อมูลจำเพาะ
- แบบอย่าง: 0A3S1-18-12
- พิมพ์: Euro Double Cylinder
- ความยาว: 79mm (40-40 NP)
- เสร็จ: ชุบนิกเกิล
- วัสดุ: Alloy Steel, Nickel
- Key Bitting System: 10 พิน
- คุณสมบัติความปลอดภัย: Snap resistant core, hardened steel pins, pick protection, BKP Bump resistant device, clutch cam.
- มาตรฐาน: First to attain TS 007 Kitemark security standard.
- น้ำหนัก: 0.4 กิโลกรัม
การรับประกันและการสนับสนุน
Cisa products are manufactured to high standards and are covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Cisa webเว็บไซต์.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Cisa customer service or your authorized dealer. Contact information can typically be found on the product packaging or the official Cisa webเว็บไซต์.