APC BR1500GI

APC Back-UPS Pro 1500VA 230V Power Saving UPS Instruction Manual

Model: BR1500GI | Brand: APC

การแนะนำ

Welcome to your APC Back-UPS Pro 1500VA 230V Power Saving Uninterruptible Power Supply. This manual provides essential information for the safe and efficient operation of your UPS, designed to protect your electronic equipment from power outages, surges, and fluctuations. Please read this manual thoroughly before installation and use.

ข้อควรระวังเพื่อความปลอดภัย

  • อันตรายจากไฟฟ้าช็อต: เครื่องสำรองไฟนี้บรรจุสารอันตรายtagห้ามถอดชิ้นส่วนเครื่องด้วยตนเอง การซ่อมบำรุงควรดำเนินการโดยบุคลากรที่มีคุณสมบัติเหมาะสมเท่านั้น
  • การต่อสายดินที่ถูกต้อง: Always connect the UPS to a grounded outlet. Do not remove the grounding prong from the power cord.
  • สำหรับใช้ภายในอาคารเท่านั้น: This product is intended for indoor use only. Do not install the UPS in direct sunlight, near heat sources, or in areas with excessive moisture.
  • การระบายอากาศ : ตรวจสอบให้แน่ใจว่ามีการระบายอากาศที่เพียงพอรอบๆ เครื่องสำรองไฟ (UPS) อย่าปิดกั้นช่องระบายอากาศ
  • ความปลอดภัยของแบตเตอรี่: Batteries can present a risk of electrical shock and high short-circuit current. Observe all precautions when replacing batteries. Use only APC-approved replacement batteries (RBC154).
  • ระบบป้องกันการโอเวอร์โหลด: อย่าใช้งาน UPS เกินกำลัง ตรวจสอบให้แน่ใจว่ากำลังไฟรวมที่อุปกรณ์ที่เชื่อมต่อใช้ไม่เกินความจุของ UPS

เนื้อหาแพ็คเกจ

ตรวจสอบว่ารายการทั้งหมดที่ระบุไว้ด้านล่างนี้รวมอยู่ในแพ็คเกจของคุณ:

  • APC Back-UPS Pro 1500VA 230V UPS Unit
  • คู่มือการใช้งาน (เอกสารนี้)
  • สายไฟ
  • สายสื่อสาร USB

สินค้าเกินview

The APC Back-UPS Pro 1500VA 230V is a tower form factor UPS providing reliable battery backup and surge protection for your critical electronic equipment.

คุณสมบัติแผงด้านหน้า

ด้านหน้า view of APC Back-UPS Pro 1500VA

ด้านหน้า view of the APC Back-UPS Pro 1500VA unit, showing the LCD display and control buttons.

  • จอแสดงผล LCD: Provides real-time status information including input/output voltage, load level, battery charge, and estimated runtime.
  • ปุ่มเปิด/ปิด: Turns the UPS unit on or off.
  • ปุ่มแสดงผล: Cycles through various display screens to show different operational parameters.
  • Mute/Setup Button: Mutes audible alarms or enters setup mode for configuration.
  • USB-A and USB-C Charging Ports: ตั้งอยู่ในตำแหน่งที่สะดวกสำหรับการชาร์จอุปกรณ์พกพา

คุณสมบัติแผงด้านหลัง

หลัง view of APC Back-UPS Pro 1500VA

หลัง view of the APC Back-UPS Pro 1500VA unit, showing the power outlets, data ports, and main power input.

  • แบตเตอรี่สำรองและเต้ารับป้องกันไฟกระชาก: Provide power from the battery during outages and protect against surges. Connect critical equipment here.
  • ช่องจ่ายไฟกระชากเท่านั้น: Provide surge protection only. Connect non-critical equipment here.
  • ช่องเสียบไฟหลัก: Connects the UPS to the wall outlet.
  • เบรกเกอร์: Provides overload protection for the UPS. Press to reset if tripped.
  • พอร์ตสื่อสาร USB: Connects the UPS to a computer for power management software.
  • Ethernet/Network Protection Ports: Protects network connections from surges.

การตั้งค่า

  1. แกะกล่องและตรวจสอบ: Carefully unpack the UPS and all accessories. Inspect for any shipping damage.
  2. เชื่อมต่อแบตเตอรี่ภายใน: The UPS battery may be disconnected for shipping. Refer to the battery compartment access panel (usually at the bottom or rear) and connect the battery terminals as indicated.
  3. จัดวางเครื่องสำรองไฟ (UPS) ให้อยู่ในตำแหน่งที่เหมาะสม: Place the UPS in a location with adequate ventilation, away from direct sunlight, excessive heat, or moisture. Ensure the front and rear vents are unobstructed.
  4. เชื่อมต่อกับเต้ารับไฟฟ้า: Plug the UPS power cord directly into a grounded 230V wall outlet. Avoid using extension cords or surge protectors with the UPS input.
  5. ค่าใช้จ่ายเริ่มต้น: Allow the UPS to charge for at least 24 hours before connecting any equipment to ensure maximum battery runtime. The battery indicator on the LCD will show charging status.
  6. เชื่อมต่ออุปกรณ์:
    • Plug critical equipment (e.g., computer, monitor, router) into the ระบบสำรองไฟแบตเตอรี่และระบบป้องกันไฟกระชาก เต้าเสียบ
    • เสียบอุปกรณ์ที่ไม่สำคัญ (เช่น เครื่องพิมพ์ เครื่องสแกน) เข้ากับ... ไฟกระชากเท่านั้น เต้าเสียบ
  7. เชื่อมต่อสายส่งข้อมูล (ไม่บังคับ): Connect your USB communication cable from the UPS to your computer to enable power management software features. Connect network cables to the Ethernet protection ports if desired.

คำแนะนำการใช้งาน

การเปิด/ปิด

  • เปิด: Press and hold the Power button on the front panel until you hear a beep and the LCD display illuminates.
  • วิธีปิด: Press and hold the Power button until the LCD display turns off.

การนำทางด้วยจอแสดงผล LCD

  • Press the Display button repeatedly to cycle through various information screens, including: Input Voltage, ปริมาณการส่งออกtage, Load in Watts, Load in VA, Battery Charge Percentage, and Estimated Runtime.

การจัดการสัญญาณเตือน

  • ระหว่างที่ไฟฟ้าดับtage, the UPS will emit an audible alarm. Press the Mute/Setup button briefly to temporarily silence the alarm.
  • To permanently disable or enable alarms, refer to the detailed instructions in the full user manual or power management software.

การซ่อมบำรุง

การเปลี่ยนแบตเตอรี่

  • The typical battery life is 3-5 years, depending on usage and environmental conditions.
  • When the battery needs replacement, the UPS will indicate this on the LCD display and may emit an alarm.
  • Use only genuine APC replacement battery cartridges (RBC154) to ensure optimal performance and safety. Refer to the full user manual for detailed battery replacement instructions.

การทำความสะอาด

  • Regularly clean the exterior of the UPS with a dry cloth.
  • Ensure ventilation openings are free from dust and debris to prevent overheating.

พื้นที่จัดเก็บ

  • If storing the UPS for an extended period, ensure the battery is fully charged.
  • Store the unit in a cool, dry location with adequate ventilation.
  • Recharge the battery every 3-6 months to prevent permanent damage.

การแก้ไขปัญหา

ด้านล่างนี้คือปัญหาที่พบบ่อยและแนวทางแก้ไขที่เป็นไปได้:

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
UPS จะไม่เปิดขึ้นBattery disconnected or low charge; UPS not plugged in.Ensure battery is connected. Plug UPS into a live wall outlet and allow to charge.
แบตเตอรี่ใช้งานได้สั้นOverloaded; battery old or not fully charged.Reduce connected load. Allow battery to charge for 24 hours. Replace battery if old.
UPS emits continuous alarmในโหมดใช้แบตเตอรี่; โหลดเกิน; แบตเตอรี่มีปัญหาCheck power source. Reduce load. Check battery status on LCD.
ไม่มีไฟฟ้าเข้าร้านUPS off; circuit breaker tripped; battery fault.Turn UPS on. Reset circuit breaker. Check battery status.

ข้อมูลจำเพาะทางเทคนิค

คุณสมบัติข้อมูลจำเพาะ
หมายเลขรุ่นBR1500GI
ขนาดสินค้า4.41 x 15.04 x 11.89 นิ้ว
น้ำหนักสินค้า27.9 ปอนด์
เล่มที่tage230 โวลต์
แบตเตอรี่ต้องใช้แบตเตอรี่ 12V จำนวน 1 ก้อน (มีให้ในชุด)
ส่วนประกอบของเซลล์แบตเตอรี่กรดตะกั่ว
สีสีดำ
วัสดุโลหะ
ฟอร์มแฟกเตอร์หอคอย

การรับประกันและการสนับสนุน

For detailed warranty information, product registration, and technical support, please visit the official APC by Schneider Electric webหรือติดต่อฝ่ายบริการลูกค้า โปรดเก็บใบเสร็จรับเงินไว้เป็นหลักฐานการซื้อสำหรับการเรียกร้องการรับประกันใดๆ

You can find additional resources and contact information at the APC by Schneider Electric Store on Amazon.