1. สินค้าหมดview
The SentrySafe P021E Portable Digital Keypad Safe Box is designed to provide secure storage for small valuables. Its robust steel construction, digital keypad, and backup key access offer reliable protection. The integrated carrying handle and compact design make it ideal for on-the-go security needs or discreet placement in various environments.

Image: SentrySafe P021E Portable Safe Box with its carrying handle extended, highlighting its portability.
This safe box is suitable for storing items such as cell phones, cash, passports, and other small, important documents or valuables.
2. การตั้งค่า
2.1 การแกะกล่องและการตรวจสอบเบื้องต้น
- Carefully remove the safe box from its packaging.
- Inspect the safe for any signs of damage. If damage is present, contact customer support.
- Verify that all included components are present: 1 security box, 2 keys, and 1 tethering cable.
2.2 การติดตั้งแบตเตอรี่
The digital keypad requires 4 AA alkaline batteries for operation. For optimal performance and longevity, SentrySafe recommends using high-quality, name-brand alkaline AA batteries with an expiration date 8-10 years from the current year. Generic and rechargeable batteries may not provide sufficient power for long-term usage.
- Open the safe box using one of the provided keys.
- ค้นหาช่องใส่แบตเตอรี่ที่ด้านล่างของฝาปิด
- Slide the battery compartment cover to open it.
- ใส่แบตเตอรี่ AA จำนวน 4 ก้อน โดยให้แน่ใจว่าขั้วถูกต้อง (+/-)
- Replace the battery compartment cover securely. Note: A loose battery cover can cause batteries to fall out, leading to loss of digital access.
2.3 การตั้งค่าชุดค่าผสมส่วนตัวของคุณ
With the safe door open, you can set your personal digital combination.
- With the safe door open, locate the red programming button on the inside of the door, near the hinge.
- Press the red programming button. The yellow light on the keypad will illuminate.
- ป้อนรหัส 3-8 หลักที่คุณต้องการลงบนแป้นพิมพ์
- Press the '#' button to confirm your new combination. The yellow light will flash and then turn off.
- Test your new combination with the door open before closing it.

Image: SentrySafe P021E Portable Safe Box with digital keypad and backup key in the lock mechanism.
3. Operating the Safe Box
3.1 Opening with Digital Combination
- Enter your personal 3-8 digit combination on the keypad.
- Press the '#' button. The green light will illuminate.
- ภายใน 5 วินาที ให้หมุนปุ่มตามเข็มนาฬิกาเพื่อเปิดประตูตู้เซฟ
3.2 Opening with Backup Key
In case of forgotten combination or dead batteries, the safe can be opened with the backup key.
- ค้นหาฝาครอบรูกุญแจบนแผงแป้นพิมพ์
- Remove the keyhole cover.
- Insert one of the provided keys into the keyhole and turn it clockwise.
- Turn the knob clockwise to open the safe door.
3.3 การปิดและการล็อค
- ปิดประตูตู้เซฟให้แน่น
- Turn the knob counter-clockwise to lock the safe. The red light will flash once to confirm locking.
Video: Demonstrating the operation of the SentrySafe P021E Portable Safe Box, including opening with the key and digital code, and showing the battery compartment.
4. การบำรุงรักษา
4.1 การเปลี่ยนแบตเตอรี่
When the batteries are low, the red light on the keypad will flash rapidly when attempting to open the safe. Replace all four AA batteries promptly following the instructions in section 2.2. Always use new, high-quality alkaline batteries.
4.2 การทำความสะอาด
Clean the exterior of the safe box with a soft, damp ใช้ผ้าเช็ดทำความสะอาด หลีกเลี่ยงการใช้น้ำยาทำความสะอาดที่มีฤทธิ์กัดกร่อนหรือตัวทำละลาย เนื่องจากอาจทำให้พื้นผิวหรือชิ้นส่วนอิเล็กทรอนิกส์เสียหายได้
4.3 การจัดเก็บกุญแจ
Store your backup keys in a secure location away from the safe box. Do not store them inside the safe, as they are essential for emergency access.
5 การแก้ไขปัญหา
5.1 Safe Does Not Open with Digital Code
- การใส่รหัสไม่ถูกต้อง: Ensure you are entering the correct 3-8 digit combination.
- แบตเตอรี่ต่ำ: If the red light flashes rapidly, replace the batteries as described in section 4.1.
- Time Limit Exceeded: After entering the code, you have 5 seconds to turn the knob. Try again, ensuring you turn the knob promptly.
5.2 Loose Battery Cover
If the battery cover inside the lid is loose, the batteries may dislodge, causing loss of power to the digital keypad. Ensure the cover is securely fastened after battery installation. If the cover is damaged, contact customer support.
5.3 Lost Keys or Forgotten Combination
If you have lost your keys and forgotten your combination, contact SentrySafe customer support for assistance. Proof of ownership may be required.
6. ข้อมูลจำเพาะ
| คุณสมบัติ | รายละเอียด |
|---|---|
| หมายเลขรุ่น | พี021อี |
| ขนาดภายนอก (กว้าง x ลึก x สูง) | 13 นิ้ว x 10 นิ้ว x 4.4 นิ้ว (33 ซม. x 25.4 ซม. x 11.2 ซม.) |
| ขนาดภายใน (กว้าง x ลึก x สูง) | 12 นิ้ว x 8.9 นิ้ว x 4.3 นิ้ว (30.5 ซม. x 22.6 ซม. x 10.9 ซม.) |
| ความจุ | 0.23 ลูกบาศก์ฟุต |
| น้ำหนักสินค้า | 4.6 ปอนด์ (2.09 กก.) |
| วัสดุ | เหล็กอัลลอยด์ |
| ประเภทล็อค | Digital Keypad Lock, Key |
| แหล่งพลังงาน | แบตเตอรี่อัลคาไลน์ขนาด AA 4 ก้อน (ไม่รวม) |
| คุณสมบัติพิเศษ | Portable, Carrying Handle |

Image: Diagram illustrating the exterior and interior dimensions of the SentrySafe P021E Portable Safe Box.
7. การรับประกันและการสนับสนุน
The SentrySafe P021E Portable Digital Keypad Safe Box comes with a manufacturer's limited warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the official SentrySafe webไซต์หรือติดต่อฝ่ายสนับสนุนลูกค้าโดยตรง
For technical assistance, replacement parts, or any other inquiries, please visit the SentrySafe support page or contact their customer service department.