User Manual for BLUSTREAM models including: SW41AB-8K 4 Way 8K HDMI Switch, SW41AB-8K, 4 Way 8K HDMI Switch, 8K HDMI Switch, HDMI Switch, Switch
File Info : application/pdf, 12 Pages, 625.13KB
DocumentDocumentSW41AB-8K User Manual SW41AB-8K_REVA7_Manual Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment. Safety And Performance Notice Do not substitute or use any other power supply other than the enclosed unit, or a Blustream approved replacement. Do not disassemble the unit for any reason. Doing so will void the manufacturer's warranty. SW41AB-8K USER MANUAL Contents Introduction 03 Features 03 Panel Descriptions 04 Infrared Remote Control 05 Infrared Distribution 05 EDID Control 06 Application Diagram 07 Specifications 08 Package Contents 08 Maintenance 08 RS-232 Control 09 RS-232 Commands 10 IR Commands 10 Installer Notes 11 02 www.blustream-us.com | www.blustream.com.au | www.blustream.co.uk Introduction SW41AB-8K USER MANUAL The SW41AB-8K HDMI2.1 switcher integrates multiple source devices where the features and functionality of the HDMI2.1 chipset are being utilised for 8K 60Hz, and 4K 120Hz signals. With selection of 4 x HDMI input sources, the SW41AB-8K can auto-switch based on detecting a 5V hot plug, or a new TMDS signal, RS-232, or manually using IR, or the front panel. Analogue and optical digital (S/PDIF) audio breakout allows for audio integration. The SW41AB-8K is HDCP2.3 compliant and has advanced EDID management of source devices connected. FEATURES: · Features 4x HDMI 2.1 inputs that can be switched to a single HDMI output · Supports HDMI 2.1 40Gbps specification including HDR · Supports up to 8K60 YCbCr 4:2:0 10bit, 8K30 RGB/YCbCr 4:4:4 10bit or 4K120 RGB/YCbCr 4:4:4 10bit · Supports ALLM (Auto Low Latency Mode) & VRR (Variable Refresh Rate) · Supports all known HDMI audio formats including Dolby Atmos, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission · Auto HDMI source switching via 5V and / or TMDS signal sensing · Manual HDMI source switching via front panel, IR and RS-232 · Audio breakout to analogue L/R audio and optical (S/PDIF) digital outputs concurrently · 5V / 12V IR Compatible · HDCP 2.3 compliant with advanced EDID management contact support@blustream.co.uk | support@blustream.com.au | support@blustream-us.com 03 Front Panel SW41AB-8K USER MANUAL 1 2 3 4 5 1 Select button - press to toggle between HDMI inputs (1 > 2 > 3 > 4 > 1...). Auto-switching function is enabled / disabled by pressing and holding the Select button for 5 seconds. Input light will flash 3 times to confirm switching function enabled / disabled 2 Output LED indicator - indicates if a display device is connected to the switches HDMI output 3 Input LED indicators - displays the HDMI input currently active 4 IR receiver window 5 Firmware upgrade port - Micro USB allows for firmware update of device Rear Panel 1 2 3 4 5 6 7 8 1 HDMI output - connect to a HDMI display device 2 HDMI inputs - connect to HDMI source devices 3 Optical S/DIF Output - De-embed digital audio from the selected HDMI input 4 Analogue Audio Left/Right output (3.5mm stereo jack) - de-embedded from the selected HDMI input. Source input must be PCM 2 channel audio for the analogue output to work. The SW41AB-8K does not down-mix multi-channel audio signals 5 External IR port - connect supplied Blustream 5V IR receiver, or control processor to control the switcher 6 EDID DIP switches - see page 06 7 RS-232 port - for control of the switcher from a 3rd party control processor or PC 8 Power port - use supplied Blustream 5V/2A DC adaptor to power the switcher 04 www.blustream-us.com | www.blustream.com.au | www.blustream.co.uk Infrared Remote Control - REMSW41 SW41AB-8K USER MANUAL 1 Input 1234 2 1 Direct HDMI input selection buttons 2 Scroll through inputs - HDMI input 1 - 2 - 3 - 4 - 1... Infrared (IR) Distribution The Blustream range of HDMI products include multiple options for IR control. IMPORTANT: Blustream Infrared products are all 5V and NOT compatible with alternative manufacturers Infrared solutions. When using third party 12V IR control solutions please use the Blustream IRCAB cable for IR conversion (12V to 5V) - sold separately. Each Blustream HDMI product is supplied with the necessary IR hardware required: IR Receiver - IRR Blustream 5V IR receiver (supplied) to receive IR signal and control the SW41AB-8K IR Control Cable - IRCAB Blustream IR Control cable 3.5mm Mono to 3.5mm Stereo for linking third party control solutions to Blustream products. Compatible with 12V IR third party products. Note: Cable is directional as indicated - not supplied contact support@blustream.co.uk | support@blustream.com.au | support@blustream-us.com 05 SW41AB-8K USER MANUAL EDID Control EDID (Extended Display Identification Data) is a data structure that is used between a display and a source. This data is used by the source to find out what audio and video resolutions are supported by the display/s. By pre-determining the video resolution and audio format of the source and display devices, you can reduce the time needed for EDID hand shaking thus making power cycles quicker and more reliable. Configuration of the EDID settings for the input can be achieved either via the EDID DIP switches on the rear of the splitter, or by using the RS-232 port and Blustream EDID API commands when in Software Control mode. 4 3210 0 1 Dip-switch Position `0' = Off Dip-switch Position `1' = On DIP ON /OFF SWITCHING POSITIONS 4 3 2 1 0 Off Off Off Off Off Off Off Off Off On Off Off Off On Off Off Off Off On On Off Off On Off Off Off Off On Off On Off Off On On Off Off Off On On On Off On Off Off Off Off On Off Off On Off On Off On Off Off On Off On On Off On On Off Off Off On On Off On Off On On On Off Off On On On On On Off Off Off Off On Off Off Off On On Off Off On Off On Off Off On On On Off On Off Off On Off On Off On On Off On On Off On Off On On On On On Off Off Off On On Off Off On On On Off On Off On On Off On On On On On Off Off On On On Off On On On On On Off On On On On On EDID TYPE HDMI 1080p@60Hz, Audio 2ch PCM HDMI 1080p@60Hz, Audio 5.1ch PCM/DTS/DOLBY HDMI 1080p@60Hz, Audio 7.1ch PCM/DTS/DOLBY/HD HDMI 4K@30Hz 4:4:4, Audio 2ch PCM HDMI 4K@30Hz 4:4:4, Audio 5.1ch PCM/DTS/DOLBY HDMI 4K@30Hz 4:4:4, Audio 7.1ch PCM/DTS/DOLBY/HD HDMI 4K@60Hz 4:2:0+4K@30Hz 4:4:4, Audio 2ch PCM HDMI 4K@60Hz 4:2:0+4K@30Hz 4:4:4, Audio 5.1ch PCM/DTS/DOLBY HDMI 4K@60Hz 4:2:0+4K@30Hz 4:4:4, Audio 7.1ch PCM/DTS/DOLBY/HD HDMI 4K@60Hz 4:4:4, 8-bit, Audio 2ch PCM HDMI 4K@60Hz 4:4:4, 8-bit, Audio 5.1ch PCM/DTS/DOLBY HDMI 4K@60Hz 4:4:4, 8-bit, Audio 7.1ch PCM/DTS/DOLBY/HD HDMI 4K@60Hz 4:4:4, 10-bit HDR, Audio 2ch PCM HDMI 4K@60Hz 4:4:4, 10-bit HDR, Audio 5.1ch PCM/DTS/DOLBY HDMI 4K@60Hz 4:4:4, 12-bit HDR (Inc DV), Audio 7.1ch PCM/DTS/DOLBY/HD HDMI 4K@120Hz 4:4:4, 10-bit HDR, Audio 2ch PCM - Inc VRR HDMI 4K@120Hz 4:4:4, 10-bit HDR, Audio 5.1ch PCM/DTS/DOLBY - Inc VRR HDMI 4K@120Hz 4:4:4, 10-bit HDR, Audio 7.1ch PCM/DTS/DOLBY/HD - Inc VRR HDMI 8K@30Hz 4:4:4, 10-bit HDR, Audio 2ch PCM - Inc VRR HDMI 8K@30Hz 4:4:4, 10-bit HDR, Audio 5.1ch PCM/DTS/DOLBY - Inc VRR HDMI 8K@30Hz 4:4:4, 10-bit HDR, Audio 7.1ch PCM/DTS/DOLBY/HD - Inc VRR HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, 10-bit HDR, Audio 2ch PCM - Inc VRR HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, 10-bit HDR, Audio 5.1ch PCM/DTS/DOLBY - Inc VRR HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, 10-bit HDR, Audio 7.1ch PCM/DTS/DOLBY/HD - Inc VRR HDMI 4K@120Hz 4:4:4, 12-bit HDR (Inc DV), Audio 2ch PCM - Inc VRR HDMI 4K@120Hz 4:4:4, 12-bit HDR (Inc DV), Audio 7.1ch PCM/DTS/DOLBY/HD - Inc VRR HDMI 8K@30Hz 4:4:4, 12-bit HDR (Inc DV), Audio 2ch PCM - Inc VRR HDMI 8K@30Hz 4:4:4, 12-bit HDR (Inc DV), Audio 7.1ch PCM/DTS/DOLBY/HD - Inc VRR HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, 12-bit HDR (Inc DV), Audio 2ch PCM - Inc VRR HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, 12-bit HDR (Inc DV), Audio 7.1ch PCM/DTS/DOLBY/HD - Inc VRR EDID Pass-through (Copy EDID from Output 1) EDID Software control 06 www.blustream-us.com | www.blustream.com.au | www.blustream.co.uk Application Diagram SW41AB-8K USER MANUAL Control Processor 4 x 8K UHD SOURCES 8K UHD DISPLAY IR HDMI Speaker Cable Analogue Audio Digital Audio RS-232 Example Schematic SW41AB-8K contact support@blustream.co.uk | support@blustream.com.au | support@blustream-us.com 07 SW41AB-8K USER MANUAL Specifications · Video Input Connectors: 4 x HDMI Type A, 19-pin, female · Video Output Connectors: 1 x HDMI Type A, 19-pin, female · Audio Output Connectors: 1 x Optical (S/PDIF) & 1 x Analogue audio L/R (3.5mm stereo jack) · IR Input Ports: 1 x 3.5mm stereo jack · RS-232 Serial Port: 1 x DB9, female · Dimensions (WxDxH): 196 x 104 x 41mm, including connections, without feet (removable) · Shipping Weight: 0.9kg · Operating Temperature: 32°F to 104°F (0°C to 40°C) · Storage Temperature: -4°F to 140°F (-20°C to 60°C) · Power Supply: 1 x 5V/2A DC NOTE: Specifications are subject to change without notice. Weights and dimensions are approximate. Package Contents · 1 x SW41AB-8K · 1 x REMSW41 Remote Control · 1 x 5V/2A DC Power Supply · 1 x IR Receiver (IRR) · 1 x Mounting Bracket Set · 1 x User Manual SW41AB-8K IR Commands SW41 Input 1 Input 2 Input 3 Input 4 Back (Input 4, 3, 2, 1, 4...) Forward (Input 1, 2, 3, 4, 1...) 08 NEC IR: CUSTOMER CODE 1898 HEX IR 0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 50 0041 0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0016 0016 0041 0016 0016 0016 0041 0016 0689 0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 55 0041 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0041 0016 0689 0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 48 0041 0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0016 0016 0041 0016 0041 0016 0016 0016 0041 0016 0689 0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 4A 0041 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0016 0016 0041 0016 0689 0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 06 0041 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0689 0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 05 0041 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0689 www.blustream-us.com | www.blustream.com.au | www.blustream.co.uk SW41AB-8K USER MANUAL RS-232 Control The SW41AB-8K switch can be controlled via a 9-pin serial cable. Details of RS-232 pin assignment and communication are below. Please note that depending on your control device serial port pin configuration you may require either a `Straight' RS-232 cable or `Null-modem' type. RS-232 Settings Baud Rate: 57600 bps Data Bit: 8-bit Parity: None Stop Bit: 1-bit Flow Control: None BLUSTREAM RS-232 PIN Assignment 1 NC 2 Tx 3 Rx 4 NC 5 GND 6 NC 7 NC 8 NC 9 NC CONTROL SYSTEM PIN Assignment 1 NC 2 Rx 3 Tx 4 NC 5 GND 6 NC 7 NC 8 NC 9 NC Commonly Used Serial Commands There are several commands that are commonly used for control and testing: STATUS Status will give feedback on switch such as zones on, type of connection etc PON Power on POFF Power off OUT FRyy (where `yy' is the input) Example: OUT FR02 (this would switch the output to source input 2) RS-232 Commands RS-232 COMMAND ? HELP STATUS PON POFF IR ON/OFF IR 5V IR 12V KEY ON/OFF RESET OUT AUTO ON/OFF OUT ON/OFF OUT FR yy EDID xx CP DESCRIPTION Print Help Information Print Help Information Print System Status and Port Status Power On, System Run On Normal State Power Off, System Run On Power Save State Set System IR Control On Or Off Set System IR Is 5V Power Supply Infrared Receiver Set System IR Is 12V Power Supply Infrared Receiver Set System KEY Control On Or Off Reset System To Default Setting (Should Type "Yes" To Confirm, "No" To Discard) Set Auto Switch Port On Or Off Set Output Port On Or Off Set Output from Input:yy yy=[01...04]: Select One Input Port Set Input:xx EDID Copy From Output xx=00: Select All Input Port xx=[01...04]: Select One Input Port contact support@blustream.co.uk | support@blustream.com.au | support@blustream-us.com 09 SW41AB-8K USER MANUAL RS-232 Commands Continued RS-232 COMMAND EDID xx DF zz DESCRIPTION xx=[01...04]: Select One Input Port xx=00: Select All INPUT Port zz=00: HDMI 1080p@60Hz, Audio 2CH PCM(Default) zz=01: HDMI 1080p@60Hz, Audio 5.1CH DTS/DOLBY zz=02: HDMI 1080p@60Hz, Audio 7.1CH DTS/DOLBY/HD zz=03: HDMI 1080i@60Hz, Audio 2CH PCM zz=04: HDMI 1080i@60Hz, Audio 5.1CH DTS/DOLBY zz=05: HDMI 1080i@60Hz, Audio 7.1CH DTS/DOLBY/HD zz=06: HDMI 1080p@60Hz/3D, Audio 2CH PCM zz=07: HDMI 1080p@60Hz/3D, Audio 5.1CH DTS/DOLBY zz=08: HDMI 1080p@60Hz/3D, Audio 7.1CH DTS/DOLBY/HD zz=09: HDMI 4K@30Hz 4:4:4, Audio 2CH PCM zz=10: HDMI 4K@30Hz 4:4:4, Audio 5.1CH DTS/DOLBY zz=11: HDMI 4K@30Hz 4:4:4, Audio 7.1CH DTS/DOLBY/HD zz=12: HDMI 4K@60Hz 4:2:0/4K@30Hz 4:4:4, Audio 2CH PCM zz=13: HDMI 4K@60Hz 4:2:0/4K@30Hz 4:4:4, Audio 5.1CH DTS/DOLBY zz=14: HDMI 4K@60Hz 4:2:0/4K@30Hz 4:4:4, Audio 7.1CH DTS/DOLBY/HD zz=15: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 2CH PCM zz=16: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 5.1CH DTS/DOLBY zz=17: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 7.1CH DTS/DOLBY/HD zz=18: HDMI 4K@60Hz 4:4:4, HDR 10-bit, Audio 2CH PCM zz=19: HDMI 4K@60Hz 4:4:4, HDR 10-bit, Audio 5.1CH DTS/DOLBY zz=20: HDMI 4K@60Hz 4:4:4, HDR 10-bit, Audio 7.1CH DTS/DOLBY/HD zz=21: HDMI 4K@60Hz 4:4:4, HDR 12-bit, Audio 2CH PCM zz=22: HDMI 4K@60Hz 4:4:4, HDR 12-bit, Audio 5.1CH DTS/DOLBY zz=23: HDMI 4K@60Hz 4:4:4, HDR 12-bit, Audio 7.1CH DTS/DOLBY/HD zz=24: HDMI 4K@60Hz 4:4:4, HDR 10-bit (Inc DV), Audio 2CH PCM zz=25: HDMI 4K@60Hz 4:4:4, HDR 10-bit (Inc DV), Audio 5.1CH DTS/DOLBY zz=26: HDMI 4K@60Hz 4:4:4, HDR 10-bit (Inc DV), Audio 7.1CH DTS/DOLBY/HD zz=27: HDMI 4K@60Hz 4:4:4, HDR 12-bit (Inc DV), Audio 2CH PCM zz=28: HDMI 4K@60Hz 4:4:4, HDR 12-bit (Inc DV), Audio 5.1CH DTS/DOLBY zz=29: HDMI 4K@60Hz 4:4:4, HDR 12-bit (Inc DV), Audio 7.1CH DTS/DOLBY/HD zz=30: HDMI 4K@120Hz 4:4:4, HDR 8-bit, Audio 2ch PCM - No VRR zz=31: HDMI 4K@120Hz 4:4:4, HDR 8-bit, Audio 5.1ch PCM/DTS/DOLBY - No VRR zz=32: HDMI 4K@120Hz 4:4:4, HDR 8-bit, Audio 7.1ch PCM/DTS/DOLBY/HD - No VRR zz=33: HDMI 4K@120Hz 4:4:4, HDR 10-bit, Audio 2ch PCM - No VRR zz=34: HDMI 4K@120Hz 4:4:4, HDR 10-bit, Audio 5.1ch PCM/DTS/DOLBY - No VRR zz=35: HDMI 4K@120Hz 4:4:4, HDR 10-bit, Audio 7.1ch PCM/DTS/DOLBY/HD - No VRR zz=36: HDMI 8K@30Hz 4:4:4, HDR 10-bit, Audio 2ch PCM - No VRR zz=37: HDMI 8K@30Hz 4:4:4, HDR 10-bit, Audio 5.1ch PCM/DTS/DOLBY - No VRR zz=38: HDMI 8K@30Hz 4:4:4, HDR 10-bit, Audio 7.1ch PCM/DTS/DOLBY/HD - No VRR zz=39: HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, HDR 10-bit, Audio 2ch PCM - No VRR zz=40: HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, HDR 10-bit, Audio 5.1ch PCM/DTS/DOLBY - No VRR zz=41: HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, HDR 10-bit, Audio 7.1ch PCM/DTS/DOLBY/HD - No VRR zz=42: HDMI 4K@120Hz 4:4:4, HDR 12-bit (inc DV), Audio 2ch PCM - No VRR zz=43: HDMI 4K@120Hz 4:4:4, HDR 12-bit (inc DV), Audio 5.1ch PCM/DTS/DOLBY - No VRR zz=44: HDMI 4K@120Hz 4:4:4, HDR 12-bit (inc DV), Audio 7.1ch PCM/DTS/DOLBY/HD - No VRR zz=45: HDMI 8K@30Hz 4:4:4, HDR 12-bit (inc DV), Audio 2ch PCM - No VRR zz=46: HDMI 8K@30Hz 4:4:4, HDR 12-bit (inc DV), Audio 5.1ch PCM/DTS/DOLBY - No VRR zz=47: HDMI 8K@30Hz 4:4:4, HDR 12-bit (inc DV), Audio 7.1ch PCM/DTS/DOLBY/HD - No VRR zz=48: HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, HDR 12-bit (inc DV), Audio 2ch PCM - No VRR zz=49: HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, HDR 12-bit (inc DV), Audio 5.1ch PCM/DTS/DOLBY - No VRR zz=50: HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, HDR 12-bit (inc DV), Audio 7.1ch PCM/DTS/DOLBY/HD - No VRR zz=51: HDMI 4K@120Hz 4:4:4, HDR 8-bit, Audio 2ch PCM - Inc VRR zz=52: HDMI 4K@120Hz 4:4:4, HDR 8-bit, Audio 5.1ch PCM/DTS/DOLBY - Inc VRR zz=53: HDMI 4K@120Hz 4:4:4, HDR 8-bit, Audio 7.1ch PCM/DTS/DOLBY/HD - Inc VRR zz=54: HDMI 4K@120Hz 4:4:4, HDR 10-bit, Audio 2ch PCM - Inc VRR zz=55: HDMI 4K@120Hz 4:4:4, HDR 10-bit, Audio 5.1ch PCM/DTS/DOLBY - Inc VRR zz=56: HDMI 4K@120Hz 4:4:4, HDR 10-bit, Audio 7.1ch PCM/DTS/DOLBY/HD - Inc VRR zz=57: HDMI 8K@30Hz 4:4:4, HDR 10-bit, Audio 2ch PCM - Inc VRR zz=58: HDMI 8K@30Hz 4:4:4, HDR 10-bit, Audio 5.1ch PCM/DTS/DOLBY- Inc VRR zz=59: HDMI 8K@30Hz 4:4:4, HDR 10-bit, Audio 7.1ch PCM/DTS/DOLBY/HD - Inc VRR zz=60: HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, HDR 10-bit, Audio 2ch PCM - Inc VRR zz=61: HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, HDR 10-bit, Audio 5.1ch PCM/DTS/DOLBY - Inc VRR zz=62: HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, HDR 10-bit, Audio 7.1ch PCM/DTS/DOLBY/HD - Inc VRR zz=63: HDMI 4K@120Hz 4:4:4, HDR 12-bit (inc DV), Audio 2ch PCM - Inc VRR zz=64: HDMI 4K@120Hz 4:4:4, HDR 12-bit (inc DV), Audio 5.1ch PCM/DTS/DOLBY - Inc VRR zz=65: HDMI 4K@120Hz 4:4:4, HDR 12-bit (inc DV), Audio 7.1ch PCM/DTS/DOLBY/HD - Inc VRR zz=66: HDMI 8K@30Hz 4:4:4, HDR 12-bit (inc DV), Audio 2ch PCM - Inc VRR zz=67: HDMI 8K@30Hz 4:4:4, HDR 12-bit (inc DV), Audio 5.1ch PCM/DTS/DOLBY - Inc VRR zz=68: HDMI 8K@30Hz 4:4:4, HDR 12-bit (inc DV), Audio 7.1ch PCM/DTS/DOLBY/HD - Inc VRR zz=69: HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, HDR 12-bit (inc DV), Audio 2ch PCM - Inc VRR zz=70: HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, HDR 12-bit (inc DV), Audio 5.1ch PCM/DTS/DOLBY - Inc VRR zz=71: HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, HDR 12-bit (inc DV), Audio 7.1ch PCM/DTS/DOLBY/HD - Inc VRR zz=72: DVI 1920x1080@60Hz, Audio None zz=73: DVI 1920x1200@60Hz, Audio None zz=74: HDMI 1920x1200@60Hz, Audio 2CH PCM/6CH PCM zz=75: User EDID 1 zz=76: User EDID 2 zz=77: EDID pass-through (Copy from Sink 1) 10 www.blustream-us.com | www.blustream.com.au | www.blustream.co.uk Certifications SW41AB-8K USER MANUAL FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. CAUTION - changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CANADA, INDUSTRY CANADA (IC) NOTICES This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CORRECT DISPOSAL OF THIS PRODUCT This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling. Maintenance Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner, or benzene to clean this unit. Components inside this unit are not user serviceable. Do not remove the protective cover from the unit. Removing any panel from this product will invalidate the manufacturers warranty. contact support@blustream.co.uk | support@blustream.com.au | support@blustream-us.com 11 www.blustream.co.uk www.blustream.com.au www.blustream-us.com