Дастури корбарии дастгоҳи мӯйтарошии бесими касбӣ ва маҷмӯаи триммерҳои GLAKER C51

1. Муқаддима

Thank you for choosing the GLAKER C51 Professional Cordless Hair Clippers and Trimmer Kit. This comprehensive grooming solution is designed for precise hair cutting, beard trimming, and body grooming. This manual provides essential information for safe and effective use, including product features, setup, operation, maintenance, and troubleshooting.

2. Маҳсулот ба охир расидview

The GLAKER C51 kit includes a powerful hair clipper and a versatile 6-in-1 multi-trimmer, along with various attachments and guide combs to meet diverse grooming needs.

Як барview of the GLAKER C51 Hair Clippers and Trimmer Kit, displaying the main hair clipper, the detail trimmer, and various interchangeable heads including a T-blade, foil shaver, nose/ear trimmer, and body groomer, along with multiple guide combs.

Хусусиятҳои асосӣ:

• Нигоҳубини ҳама дар як: Includes hair clipper, beard trimmer, T-blade, foil shaver, nose/ear trimmer, and body groomer.
• Powerful Motor & Sharp Blades: Equipped with a high-speed motor (up to 7200 RPM) and ultra-sharp stainless steel blades for efficient cutting without snags or irritation.
• Тозакунии дақиқ: Features an adjustable fade lever (0.5–1.5mm) and multiple guide combs (1/16"–3/8", 3/6/9/12mm) for customizable lengths.
• Ҳаёти батареяи дароз: Provides up to 150–240 minutes of cordless use on a single charge.
• Пуркунии USB-C: Пуркунии зуд ва қулайро таъмин мекунад.
• Амалиёти ором: Low-noise design (<68dB) for comfortable use.
• Тоза кардан осон: Detachable blades and IPX6 waterproof rating for easy cleaning (main clipper body is not washable).

An illustrative diagram detailing the components of the GLAKER 700UU Hair Trimmer (Beard Trimmer, Hair Trimmer, Precision Trimmer, Foil Shaver, Nose/Ear Trimmer, Body Trimmer with respective guide combs) and the GLAKER C51 Hair Clippers (with 3/6/9/12mm guard combs).

3. Маълумот оид ба бехатарӣ

Please read all safety instructions before using the product to prevent injury or damage.

• Аз истифодаи наздики чашм худдорӣ кунед.
• Қисмҳои хурдро фурӯ набаред ё нафас накашед.
• Clean regularly as instructed in the maintenance section.
• Барои кӯдакони то 3 сола бидуни назорати калонсолон мувофиқ нест.
• Keep the device dry when charging.
• Do not immerse the main clipper body in water. Only detachable blades are washable.

4. Танзимот

Пуркунии ибтидоӣ:

Before first use, fully charge both the hair clipper and the trimmer. Connect the USB-C charging cable to the device and a compatible 5V, 1A to 3A USB power adapter (not included). The display will indicate charging status.

The image illustrates the convenient USB-C charging port on the GLAKER clipper, compatible with 5V, 1A to 3A adapters (adapter not included).

Attaching and Removing Blades/Guards:

Ensure the device is turned off before attaching or removing any blades or guide combs.

• To Attach a Blade Head: Align the desired blade head with the trimmer body and press firmly until it clicks into place.
• Барои хориҷ кардани сари теғ: Gently push the blade head away from the trimmer body until it detaches.
• To Attach a Guide Comb: Snap the desired guide comb onto the clipper or trimmer blade. Ensure it is securely fastened.
• To Remove a Guide Comb: Gently lift the comb from the blade.

A visual guide demonstrating how to easily attach and remove the interchangeable trimmer heads for cleaning or switching between grooming functions.

5. Дастурҳои истифодабарӣ

Always ensure your hair and skin are clean and dry before grooming for best results.

Тарошидани мӯй:

1. Шонаи роҳнамои мувофиқро барои дарозии мӯи дилхоҳатон интихоб кунед.
2. For the main hair clipper, use the adjustable taper lever (0.5mm to 1.5mm) to fine-tune cutting length for blending and fading.
3. Turn on the clipper and move it against the direction of hair growth, using smooth, even strokes.
4. Start with a longer comb length and gradually reduce if a shorter cut is desired.

An individual using the GLAKER hair clipper, illustrating the smooth cutting action without hair tugging or pulling, ensuring comfort during use.

Beard Trimming and Styling:

1. Attach the beard trimmer head to the multi-trimmer.
2. Use the included guide combs (1.5/3/6/9mm) to achieve desired beard length.
3. For precise lines and edging, use the precision trimmer head without a comb.
4. For a close shave or stubble, attach the foil shaver head.

Nose, Ear, and Body Grooming:

• Nose/Ear Trimmer: Gently insert the nose/ear trimmer head into the nostril or ear canal and move it in a circular motion to trim unwanted hair.
• Мутахассиси бадан: Attach the body groomer head and use with or without guide combs (3/6/9mm) for sensitive areas or general body hair trimming.

A composite image demonstrating the versatility of the GLAKER grooming kit for styling from head to toe, including hair cutting, defining beard lines, trimming nose and ear hair, and body grooming.

6. Нигоҳдорӣ

Тозакунӣ:

Тозакунии мунтазам иҷрои беҳтарин ва гигиенаро таъмин мекунад.

1. Пеш аз тоза кардан, дастгоҳро хомӯш ва аз сими барқ ​​ҷудо кунед.
2. Сари майсаро хориҷ кунед.
3. Brush away any loose hair from the blades and inside the trimmer body using the cleaning brush.
4. Rinse the detachable blade heads under running water. The main clipper body is not washable.
5. Пеш аз пайваст кардан ё нигоҳ доштан, ҳамаи қисмҳоро дар ҳаво пурра хушк кунед.

An image demonstrating the quick cleaning process for the detachable clipper blades under running water. Note that the main hair clipper body is not washable.

Пиёзҳои равған:

Apply a few drops of lubricating oil (included) to the blades before each use to maintain sharpness and smooth operation.

An image showing the process of applying oil to the clipper blades, a necessary step before each use to ensure smooth operation and blade longevity.

Нигоҳдорӣ:

Store the device and all accessories in a cool, dry place, away from direct sunlight and out of reach of children.

7. Баррасии мушкилот

If you encounter issues with your GLAKER C51 kit, please refer to the following common solutions:

• Дастгоҳ фаъол нест: Ensure the device is fully charged. Connect it to the charger and check the battery indicator.
• Иҷрои сусти буридан: Clean the blades thoroughly to remove any hair buildup. Apply lubricating oil to the blades. Ensure the blade head is correctly attached.
• Садо ё ларзиши аз ҳад зиёд: This may indicate a need for cleaning and oiling the blades. Ensure all attachments are securely fastened.
• Батарея барқро нигоҳ намедорад: Ensure you are using a compatible USB-C charger (5V, 1A to 3A). If the issue persists, contact customer support.

8. Мушаххасоти

9. Кафолат ва дастгирӣ

GLAKER products come with a Кафолати 1 сол from the date of purchase, covering manufacturing defects. For warranty claims, technical support, or any questions regarding your GLAKER C51 kit, please contact GLAKER customer service through the retailer where the product was purchased or visit the official GLAKER webсайт барои маълумоти дастгирӣ.