Electight 14 LEDs Motion Sensor Light Indoor

Муқаддима

Thank you for choosing the Electight 14 LEDs Motion Sensor Light. This product is designed to provide convenient, energy-efficient lighting for various indoor spaces. Featuring advanced motion sensing technology, multiple operating modes, and a rechargeable battery, it offers a versatile lighting solution for your home. Please read this manual thoroughly before use to ensure proper operation and longevity of your device.

Маълумот оид ба бехатарӣ

• Нурро ба қисмҳо ҷудо накунед ё тағир надиҳед.
• Keep away from water and high humidity environments. This product is for indoor use only and is not waterproof.
• Avoid direct exposure to strong light sources, which may interfere with the motion sensor.
• Ба ҳарорати аз ҳад зиёд дучор нашавед.
• Use only the provided USB charging cables for recharging.
• Аз дастрасии кӯдакон дур нигоҳ доред.

Дар қуттӣ чӣ ҳаст

Бастаи шумо бояд ҷузъҳои зеринро дар бар гирад:

• 3 x Motion Sensor Lights Indoor
• 3 x кабелҳои пуркунандаи USB
• 3 x Magnetic Sheets
• 3 х Лавҳаҳои оҳанин

Image: Package contents including lights, cables, and mounting accessories.

Маҳсулот ба охир расидview

The Electight Motion Sensor Light features 14 high-quality LED beads for soft, flicker-free illumination. Its compact and round design (3.26"D x 3.26"W x 0.78"H) makes it suitable for various indoor applications.

Хусусиятҳои асосӣ:

• Eye Protection Night Light: 14 LED beads provide soft, glare-free warm white light (3000 Kelvin).
• Auto Motion Sensor & 3 Modes: Adjustable ON/AUTO/OFF modes. In AUTO mode, it detects motion within 120° and 9.8 ft (3m) and turns off after 15 seconds of no motion.
• Rechargeable & Long Battery Life: Built-in high-capacity battery, rechargeable via USB-C. Lasts over 90 days in AUTO mode or 8-12 hours in ON mode on a full charge.
• Сабук ва сайёр: Easy magnetic installation without additional tools.

Image: Key features of the motion sensor light.

Image: Product dimensions and mode switch explanation.

Ташкил кардан

The Electight Motion Sensor Light features a simple magnetic installation method, requiring no drilling or complex tools.

Magnetic Installation Method:

1. Attach the small circular magnet to the center of the night light's back.
2. Remove the blue protective film from the iron sheet.
3. Paste the iron sheet firmly onto the desired clean, dry surface where you need lighting.
4. Attach the night light (with the magnet attached) to the iron sheet. The light will securely hold in place magnetically.

Image: Step-by-step magnetic installation guide.

For a visual guide on installation, please watch the video below:

Дастурҳои амалиётӣ

The light features a simple slide switch to select between three operating modes:

• Ҳолати ФУРУШ: The light remains continuously on. Use this mode for constant illumination, such as an emergency light.
• Ҳолати АВТО: The light activates automatically when motion is detected in dark conditions. It will turn off approximately 15 seconds after no motion is detected. This mode is ideal for energy saving and hands-free operation in areas like hallways, closets, or stairs.
• Ҳолати хомӯш: The light is completely off.

Image: Motion sensing range and auto-off function.

See the motion sensor in action:

Пур кардан

The Electight Motion Sensor Light is equipped with a built-in rechargeable Lithium Polymer battery. To charge the device:

1. Locate the USB-C charging port on the side of the light.
2. Connect one end of the provided USB charging cable to the light and the other end to a USB power source (e.g., computer, power bank, USB wall adapter).
3. A red indicator light will illuminate while charging. The light will turn off when the battery is fully charged.

A full charge typically takes approximately 2 hours. The light can last for over 90 days in AUTO mode or 8 to 12 hours in continuous ON mode, depending on usage frequency.

Image: Charging indicator status.

Нигоҳдорӣ

To ensure optimal performance and longevity of your Electight Motion Sensor Light:

• Тозакунӣ: Wipe the light gently with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Нигоҳдорӣ: If storing for an extended period, charge the battery fully and store in a cool, dry place. Recharge every 3-6 months to maintain battery health.
• Нигоҳубини сенсор: Линзаи сенсори ҳаракатро тоза ва аз монеаҳо озод нигоҳ доред, то дақиқ муайян карда шавад.

Мушкилкушо

Мушаххасоти

Кафолат ва дастгирӣ

Electight products are manufactured to high-quality standards. For any product-related inquiries, technical support, or warranty claims, please contact Electight customer service through the retailer's platform or the official brand webсайт. Лутфан далели хариди худро бо мақсади кафолат нигоҳ доред.