POTTER PSN-106B

POTTER PSN-106B 10 AMP 6 NAC Power Supply User Manual

Model: PSN-106B

1. Муқаддима

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the POTTER PSN-106B 10 AMP 6 NAC Power Supply. Please read this manual thoroughly before attempting to install or operate the unit. Retain this manual for future reference.

POTTER PSN-106B Power Supply unit, black casing with various terminals and indicators.

Figure 1: POTTER PSN-106B 10 AMP 6 NAC Power Supply. This image shows the front view of the power supply, highlighting its black casing and the layout of its connection terminals and status indicators.

2. Маълумот оид ба бехатарӣ

Огоҳӣ: Installation and servicing must be performed by qualified personnel only. Disconnect all power sources before servicing to prevent electric shock or equipment damage.

  • Ҳамеша қоидаҳои маҳаллӣ ва миллии барқро риоя кунед.
  • Ба заминкании дурусти агрегат таъмин карда шавад.
  • Дастгоҳро ба намӣ ё ҳарорати аз ҳад зиёд нагузоред.
  • Ҳаҷми вурудро тасдиқ кунедtagпеш аз пайваст шудан ба манбаи барқ, рейтингҳои электронӣ ва ҷорӣ.

3. Маҳсулот ба охир расидview

The POTTER PSN-106B is a 10 AMP, 6 NAC (Notification Appliance Circuit) power supply designed for fire alarm and security applications. It provides regulated and filtered power to connected devices.

Хусусиятҳои асосӣ:

  • 10 Amp total output current.
  • Six independently supervised Notification Appliance Circuits (NACs).
  • Built-in battery charger for standby power.
  • Fault monitoring and reporting capabilities.

4. Танзим ва насб

4.1 Ҷойгиркунии дастгоҳ

  1. Select a suitable location that is clean, dry, and free from excessive vibration or heat.
  2. Mount the power supply securely to a wall or other stable surface using appropriate fasteners. Ensure adequate ventilation around the unit.

4.2 Пайвастҳои ноқилӣ

Refer to the wiring diagram provided inside the unit's enclosure for specific connection points. All wiring must comply with NFPA 70 (National Electrical Code) and NFPA 72 (National Fire Alarm and Signaling Code).

  • Вуруди барқ ​​AC: Connect the main AC power source to the designated terminals. Ensure the power source matches the unit's voltagд талабот.
  • Пайвастҳои батарея: Connect standby batteries to the battery terminals, observing correct polarity. Batteries are essential for maintaining power during AC failures.
  • NAC Outputs: Connect notification appliances (horns, strobes, etc.) to the NAC terminals. Each NAC is supervised for open and short circuits.
  • Натиҷаҳои ёрирасон: Connect auxiliary devices requiring regulated power to the auxiliary power terminals.
  • Trouble/Supervisory Relays: Connect these outputs to the main fire alarm control panel (FACP) for remote fault reporting.

5. Дастурҳои истифодабарӣ

5.1 Фаъолсозии ибтидоӣ

  1. After all wiring is complete and verified, apply AC power to the unit.
  2. Observe the status indicators. The AC POWER LED should illuminate steadily.
  3. If batteries are connected, the BATTERY CHARGE LED should indicate charging status.

5.2 Нишондиҳандаҳои ҳолати

НишондиҳандаСтатусТавсифи
Қувваи барқСабз (устувор)AC power is present and within normal operating range.
БАТАРЕЯСабз (устувор)Batteries are connected and fully charged.
БАТАРЕЯЗард (дурахшон)Батареяҳо пур карда мешаванд.
МАШВАРАТЗард (устувор)A fault condition exists (e.g., AC failure, battery fault, ground fault, NAC fault).
NAC 1-6Сабз (устувор)NAC is active and supplying power.
NAC 1-6Зард (устувор)NAC fault detected (open or short circuit).

6. Нигоҳдорӣ

Regular maintenance ensures the reliable operation of your PSN-106B power supply. All maintenance should be performed by qualified personnel.

  • Ҳар моҳ: Inspect the unit for any visible damage. Verify all status indicators are normal.
  • Ҳар сол: Санҷиши ҳаҷми батареяtage and capacity. Replace batteries as recommended by the manufacturer (typically every 3-5 years). Clean any dust accumulation from the enclosure and ventilation openings.
  • Нигоҳ доштани сабт: Maintain a log of all inspections, tests, and maintenance performed.

7. Баррасии мушкилот

If the unit exhibits abnormal behavior, refer to the following table before contacting technical support.

МушкилотСабаби эҳтимолӣҲалли
AC POWER LED OffNo AC input power.Check circuit breaker, power cord, and AC input terminals.
TROUBLE LED OnGeneral fault condition.Check other status LEDs for specific fault (e.g., battery, ground, NAC).
BATTERY LED Yellow (Steady)Battery fault or low battery.Check battery connections, voltage, and age. Replace if necessary.
NAC LED Yellow (Steady)NAC open or short circuit.Inspect wiring on the affected NAC for breaks or shorts. Verify end-of-line resistor.

8. Мушаххасоти

ПараметрАрзиш
МоделиPSN-106B
БрендПОТТЕР
Ҷараёни баромад10 Ampс (Ҷамъ)
NACs6
Ватtage100 ватт
UPC742779300829
ASINB09LFLLWWD
Санаи аввалин дастрас9 ноябри соли 2021

9. Кафолат ва дастгирии техникӣ

For warranty information, please refer to the documentation included with your purchase or visit the official POTTER website. For technical assistance, contact POTTER customer support. Ensure you have your model number (PSN-106B) and purchase details available when contacting support.

Истеҳсолкунанда: ПОТТЕР

Web: www.pottersignal.com (Хурampистинод, истиноди воқеӣ метавонад фарқ кунад)

© POTTER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.