HA110B Projector
“
Specifications
- Product Native Resolution: HD
- Projection Technology: HD IN*2
- Lamp Type: USB Interface Earphone
- WiFi: LAN AV
- BT: USB 2.0 Port*2 3.5mm Audio Port *1 LAN IN*1 AV IN*1
- Ethernet: AC 10 0-240V 50~60HZ
- Operating Temperature: 0 ~ 30
- Storage Temperature: -20 ~ 65
- Operating Humidity: 0 ~ 90% Non-condensing
Product Usage Instructions
Safety Tips
- For the best viewing effect, use the projector in a dark
room. - Avoid installing the projector in areas directly blown by
air. - Clean the filter regularly to prevent malfunctions caused by
clogging. - Avoid touching the inside of the projector as it contains
uninsulated voltage. - Avoid installing the projector around flammable objects to
prevent fire hazards.
Installation Guidelines
- Place the projector horizontally with about 30cm space between
the projector and the wall. - Avoid installing in poorly ventilated, high-temperature, or
humid places. - Ensure vents are not blocked and avoid dusty or smoky
environments.
Projector Introduction
Refer to the user manual for detailed information on the
projector’s components and their functions.
Remote Control Introduction
Learn about the various functions of the remote control for
operating the projector effectively.
Maintenance Suggestions
Follow maintenance suggestions provided to ensure the longevity
of the projector’s performance.
FAQ
Why is there no display when I connect HD port?
- Check if the interface is securely connected.
- Ensure compatibility between devices.
- Clean the lens if it’s dirty.
- Adjust the projection lens focus properly.
- Avoid bright environments that may affect display quality.
- If issues persist, reboot the projector and contact customer
service if needed.
“`
70X100mm 105g
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Safety Tips
For the best viewing effect, please use the projector in dark room. 1. Do not install this projector in the area which directly blown by the air
conditioner, to prevent projector failed caused by water vapor condensation or excessive temperature. 2. Ensure that the environment is ventilated to prevent overheat caused by heats build-up. 3. Prevent foreign objects from falling into the machine. Never insert any metal objects into the machine. If foreign objects fall into the machine accidentally, please power off immediately and seek professional assistance. 4. Do not place any liquid on the machine to avoid leakage. 5. Avoid violent vibrations when transporting. Please protect the lens from wear. 6. Do not touch the vents when using the projector to avoid burns due to excessive temperature. 7. Do not look directly at the lens while the projector is running to prevent eye injury.
8. Please clean the filter regularly to prevent malfunction caused by clogging.
Notice
Do not open the case of projector to prevent electric shock. Please seek professional assistance for maintenance matters.
Warn
Do not touch! The inside of the projector contains uninsulated voltage.
Warn
Do not install the projector around flammable objects to prevent fire.
1
Safety Tips
30cm
30cm
30cm
30cm
To ensure the performance and stability of the projector, please place it horizontally and leave a space of about 30cm between the projector and the wall.
Do not install in place with poor ventilation.
Do not install in high temperature or humid places.
Do not block the vents.
Do not install in dust or smoky places.
2
Specifications
Item
Product Native Resolution Projection Technology Lamp Type WiFi BT Ethernet
HD
Specification HA110- B 1920×1080 LCD Display LED Lamp Dual Band WiFi 2.4/5GHz BT 5.0 100Mbps
HD IN*2
USB Interface Earphone
LAN AV
USB 2.0 Port*2 3.5mm Audio Port *1 LAN IN*1 AV IN*1
Environment
Power Input
AC 10 0-240V 50~60HZ
Operating Temperature 0 ~ 30 Storage Temperature -20 ~ 65
Operating Humidity
0 ~ 90% Non-condensing
1 Package Contents
Projector
Power Cable Remote Control Heightening Screw
HD Cable
User Manual
3
Projector Introduction
1
2
4 56 7
8 9 10
3
11
12
13 1
14
46 23 5 7
1. IR Remote Sensor 2. Projection Lens 3. Vent 4. Power On 5. IR Remote Sensor 6. LAN Port 7. HD Port 8. USB Port 9. 3.5mm Audio Port 10. AV Port 11. AC Port 12. Vent 13. Trumpet 14. Dust Filter
8 10
9
1. Light Bar 2. Left 3. Right 4. Return 5. Power On/OK
6. Up 7. Down 8. Dust-removal Hole 9. Wall-mount Hole 10. Lifting Hole * 4
(Foot pad needs to be removed)
The appearance of the projector may vary, please refer to the actual product.
4
Remote Control Introduction
Power ON/OFF Navigation key
Return Home VOL FocusVoice Key
Input Source
Menu Mouse Mode Setting VOL + Focus+ Mute Auto Focus
5
Electric Focus Buttons
Press Focus +/- to adjust the image sharpness.
6
Q&A
* Check if the power cord is connected properly when power light is on. Try to unplug and plug the power cord if the projector still can not boot up.
* Do not cover lR receiver. * ln the infrared mode, make sure remote point at lR receiver directly. * There is an obstacle between the remote control and the projector. * The batteries are out of power or the battery is not installed correctly.
Why is there no display when I connect HD port?
* Check if the interface is securely connected. * The devices may be incompatible.
* The lens is not clean. * The projection lens is not correctly focused. * The environment is too bright.
* Please reboot the projector to test again. If the screen still freeze, please turn off for 10 minutes and turn on again. If you have any questions or suggestions, please contact our online customer service.
7
Maintenance Suggestions
Open filter from here
To make this projector work longer, we recommend you to follow the suggestions: 1. Before cleaning the projector, turn off the projector, then turn off the
main power and unplug it from the outlet. 2. Clean the filter regularly every month to prevent clogging. 3. Make sure the projector off once you finish using it. 4. Make sure not to use it continuously for more than 6 hours.
8
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Documents / Resources
 | TFIRETEK HA110B Projector [pdf] User Manual 2A54Y-HA110B, 2A54YHA110B, ha110b, HA110B Projector, HA110B, Projector |