Teufel REAL BLUE Wireless Headphone User Guide

Teufel REAL BLUE Wireless Headphone

BEFORE USE

1. Please take out the headphones from the charging case
2. Remove the crergis pad protection film Put the head phones back into the charging case

Pairing

1. First time use: After removing the charging pad protection film, put both headphones inside the charging case, then take them out, the headphones enter pairing mode.
2. Enable the Bluetooth of your device to search and pair with a new device Teufel REAL BLUE TWS 2″, the LEDs turn off after being successfuly paired.
3. Connect with a new device: If you want to connect to another device after one device has already been paired, tap and hold both L&R multipurpose area for 4s, the headphone will switch to pairing mode for a new connection.

How to use

This section describes the multipurpose area.

play music

• Double-tap L/R multipurpose area to play/pause music.
• Triple-tap Rmultipurpose area to skip to the next track.
• Triple-tap L multipurpose area to go back to the previous track.

Phone

• Double-tap L/R multipurpose area to answer a call.
• Tap and hold L/Rmultipurpose area 1.5 seconds to reject a call
• Double-tap L/R multipurpose area to end a call.

Volume 

• During play or call, single-tap R mutipurpose area for volume up, L multipurpose area for volume down.

Voice Assistant

• Tap and hold R multipurpose area for 1.5 seconds to enable/disable the Voice Assistant.

transparency/ANC
Tap and hold multipurpose area for 1.5 seconds to cycle through: Noise Canceling

How to charge

• Headphone Charging: Put the headphones inside the charging case for charging.
• Charging Case: Plug the type-c charging cable into the charging port on the back ofthe charging case to start charging. Make sure to use the conforming SV charging adapter

The LEDs can show you the battery charging status once you open or close the charging case.

Battery status

• 1-32%: LED1 flashes
• 33-65%: LED 1 solid on end LED 2 flashes
• 66-99%: LED1+2 5olid o- a-c LED 3 flashes
• 100%: LED1+2+3 solid on

Wear your headphone correctly for optimal sound

For the best possible hearing enjoyment and comfortable wearing. please review the following information before you use your headphones. Inappropnately using the eartips or not wearing your headphone correctly may cause you couldn’t hear the full sound or limit the sound quality.

Teufel Bluetooth ApP

Download the Teufel Headphones App for 1OS and And roid and enhance your headphone experience.

Documents / Resources