HUAWEI EchoLife HG8145V5 4ge Plus Tel Gpon Terminal WiFi Router User Guide

Do not use cleaners, gasoline, ammonia, or other corrosive
chemicals to wipe the product.
The tools and auxiliary materials not delivered with the
equipment must be prepared by professional personnel.

NOTE:

Do not install the ONT and user cables outdoors or in an
outdoor cabinet.

The ONT can be mounted onto a wall or placed on a desk.
Keep 10 cm clearance on all sides to ensure adequate
ventilation.

It is recommended that the computer and ONT be put far away
from electric appliances that generate strong magnetic or electric
fields, such as microwave ovens.

Mounting an ONT on the desk:

The figure below shows an ONT that is horizontally placed on a
desk.

Mounting an ONT onto the wall:

Mark two positions with the same spacing as that between the
two mounting holes of the ONT using a marker on a wall.
Select a proper drill bit according to the outer diameter of
the screws. Use a hammer drill to drill the marked positions on the
wall. Then clean the holes and install two expansion bolts.

FAQ (Frequently Asked Questions)

Q: Can I install the ONT outdoors?

A: No, it is not recommended to install the ONT and user cables
outdoors or in an outdoor cabinet.

Q: How much clearance is recommended for ventilation?

A: It is recommended to keep a clearance of at least 10 cm on
all sides to ensure adequate ventilation for the device.

“`

View Fullscreen

EchoLife HG8145V5
Quick Start for QR code

Issue Date

01 2024-12-17

HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2024. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided “AS IS” without warranties, guarantees or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address:

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People’s Republic of China

Website: Email:

https://www.huawei.com support@huawei.com

Issue 01 (2024-12-17)

Security Declaration
Vulnerability
Huawei’s regulations on product vulnerability management are subject to the Vul. Response Process. For details about this process, visit the following web page: https://www.huawei.com/en/psirt/vul-response-process For vulnerability information, enterprise customers can visit the following web page: https://securitybulletin.huawei.com/enterprise/en/security-advisory

Issue 01 (2024-12-17)

EchoLife HG8145V5 Quick Start for QR code

Contents

Contents
1 Placing the Device……………………………………………………………………………………………………. 1 2 Connecting Cables……………………………………………………………………………………………………. 4 3 Indicator Description……………………………………………………………………………………………….. 6 4 Technical Specifications…………………………………………………………………………………………… 8 5 FAQs………………………………………………………………………………………………………………………….. 9

Issue 01 (2024-12-17)

iii

EchoLife HG8145V5 Quick Start for QR code

1 Placing the Device

1 Placing the Device
WARNING
1. Install devices only by professional personnel. Do not install devices without permission.
2. Do not use cleaners, gasoline, ammonia or other corrosive chemicals to wipe the product.
3. The tools and auxiliary materials that are not delivered with the equipment must be prepared by professional personnel.
NOTE
Do not install the ONT and user cables outdoors or in an outdoor cabinet. The ONT can be mounted onto a wall or placed on a desk. Do not install the ONT in
other modes, such as ceiling. Keep 10 cm clearance on all sides to ensure adequate ventilation. It is recommended that the computer and ONT be put far away from electric appliances
that generate strong magnetic or electric fields, such as microwave ovens.
Mounting an ONT on the desk
The figure below shows an ONT that is horizontally placed on a desk.

Issue 01 (2024-12-17)

EchoLife HG8145V5 Quick Start for QR code

1 Placing the Device

NOTE
The appearance shown in this document may be different from the actual appearance of the product. The actual product prevails.
Mounting an ONT onto the wall
1. Mark two positions with the same spacing as that between the two mounting holes of the ONT using a marker on a wall.
2. Select a proper drill bit according to the outer diameter of the screws. Use a hammer drill to drill the marked positions on the wall. Then clean the holes and install two expansion bolts.
3. Use a screwdriver to fasten the screws into the expansion bolts, reserving 5 mm ends out of the wall, and mount the ONT onto the screws.

Issue 01 (2024-12-17)

EchoLife HG8145V5 Quick Start for QR code

1 Placing the Device

NOTE It is recommended that the screw be about 4 mm in diameter and longer than 20 mm.

Issue 01 (2024-12-17)

EchoLife HG8145V5 Quick Start for QR code

2 Connecting Cables
2 Connecting Cables

Issue 01 (2024-12-17)

EchoLife HG8145V5 Quick Start for QR code

2 Connecting Cables

NOTE

The fiber connector connected to the optical port on the wall varies depending on actual conditions.
To ensure normal use of fibers, make sure that the fiber bending radius is larger than 30 mm.

No.

Item

Description

Optical The optical port is equipped with a rubber plug and

port

connected to a fiber for upstream transmission.

The type of the optical connector connected to the optical port can be SC/APC or SC/UPC.

On/Off Powers the ONT on or off.

Power Connects to a power adapter.

USB

Connects to USB storage devices.

TEL

Connects to the port on a telephone or fax machine.

LAN1- Connects to PCs or IP set-top boxes (STBs).

LAN4

WLAN Used to enable or disable the WLAN function

– When the WLAN is disabled, press the WLAN button (> 3s) and release the button to enable the WLAN.

– When the WLAN is enabled, press the WLAN button (> 3s) and release the button to disable the WLAN.

WPS

When the WLAN is on, press the WPS button (> 3s) and

release the button to start Wi-Fi protected setup (WPS)

negotiation.

Reset

Press the button for a short time to reset the device; or

press the button for a long time (longer than 10s) to

restore the device to the default settings and reset the

device.

NOTE Reset Huawei ONTs with caution. Otherwise, the ONTs may fail to access the Internet. If an ONT cannot access the Internet after a reset, contact your Internet service provider.

Issue 01 (2024-12-17)

EchoLife HG8145V5 Quick Start for QR code

3 Indicator Description

Indicator Power PON/LOS LAN1LAN4 TEL
USB
WLAN

Status

Description

Steady on The ONT is powered on.

Off

The power supply is cut off.

See the following table .

Steady on The Ethernet connection is in the normal state.

Blinking

Data is being transmitted over the Ethernet port.

Off

The Ethernet connection is not set up.

Steady on

The ONT is registered with the softswitch but no service flows are transmitted.

Blinks twice The ONT is registered with the softswitch, and data

a second

is being transmitted on the port.

Blinks once every 2 seconds

The ONT fails to be registered with the softswitch.

Off

The POTS port is disabled.

Steady on

The USB port is connected and working in the host mode, but no data is transmitted.

Blinking

Data is being transmitted on the USB port.

Off

The system is not powered on or the USB port is not

connected.

Steady on The WLAN function is enabled.

Blinking

Data is being transmitted over the WLAN port.

Off

The WLAN function is disabled.

Issue 01 (2024-12-17)

EchoLife HG8145V5 Quick Start for QR code

3 Indicator Description

Indicator WPS

Status Steady on Blinking Off

Description The WPS function is enabled. A Wi-Fi terminal is accessing the system. The WPS function is disabled.

Status PON

No.

Status

Off

Blinks

twice a

second

Blinks

twice a

second

Steady on

LOS Status Off Blinks twice a second Off
Off

Off

Blinks once every 2 seconds

Blinks once Blinks

every 2

once

seconds

every 2

seconds

Description
The ONT is prohibited by the upper-layer device or blinks abnormally. Contact the service provider for help.
The ONT attempts to set up a connection with its upper-layer device.
A connection is set up between the ONT and its upper-layer device. The ONT is not connected to fibers or does not receive optical signals.
The hardware is faulty.

NOTE If the ONT is not powered on or the power switch is turned off, all indicators are off.

Issue 01 (2024-12-17)

EchoLife HG8145V5 Quick Start for QR code

4 Technical Specifications

Product HG8145V5

Function
4 Ethernet ports 1 POTS port 1 USB port 2.4 GHz & 5 GHz Wi-Fi

Power adapter input: See the nameplate on the adapter. System power supply: See the nameplate on the device. Ambient temperature: 0ºC to +40ºC Ambient humidity: 5%95% (non-condensing) Dimensions (H x W x D): 30 mm x 155 mm x 105 mm (without external
antenna and pads) Weight: About 220g Maximum system power consumption: 12 W

Issue 01 (2024-12-17)

EchoLife HG8145V5 Quick Start for QR code

5 FAQs

5 FAQs
NOTE
The following web page is only for reference. The actual web page of the product prevails.
How do I log in to the Huawei ONT web page?
NOTE
You are advised to use the latest browser to log in to the web configuration page. Chrome 58/Edge 14/Firefox 54/Safari 10/Opera 55 or later is recommended. If the browser of an earlier version is used, compatibility issues may occur.
Wireless login 1. Connect your mobile phone, pad, or PC to the Wi-Fi network of the Huawei
ONT. 2. Enter the IP address in the address box of a browser and press Enter. On the
displayed login page, enter the username and password. (For details about the IP address, login username, and password, see the product nameplate.) Wired login 1. Use a network cable to connect a PC to the Huawei ONT.

2. Set the IP address of the PC in the same subnet as the web address of the Huawei ONT. For example, if the web address of the Huawei ONT is 192.168.a.b (for the web address of the Huawei ONT, see the product nameplate), set the IP address of the PC to 192.168.a.c.
NOTE
The preceding cable connection diagram and login pages are only for reference, and those of the actual product prevail.

Issue 01 (2024-12-17)

EchoLife HG8145V5 Quick Start for QR code

5 FAQs

3. Log in to the web configuration page.
a. Open a browser. In the address box, enter the web address (printed on the nameplate of the Huawei ONT). Press Enter.
b. Enter the login user name and password (printed on the nameplate of the Huawei ONT). Click Log In.
NOTE
If you do not perform any operations after logging in to the system within five minutes, you will be logged out, and the system automatically returns to the login interface.
The system will be locked for one minute if you input incorrect user name and password for three consecutive times.
Change the initial password after logging in to the web page for the first time.
How do I change the Wi-Fi password?
1. Log in to the Huawei ONT web page using your mobile phone, pad, or PC. For details, see “How do I log in to the Huawei ONT web page?”
2. Choose the Advanced > WLAN tab and choose 2.4G Basic Network Settings. (If you want to configure 5G Wi-Fi, choose 5G Basic Network Settings.).

What can I do if I forget the Wi-Fi password?
1. Log in to the Huawei ONT web page using your PC by wired login. For details, see “How do I log in to the Huawei ONT web page?”
2. Choose the Advanced > WLAN tab and choose 2.4G Basic Network Settings. (If you want to configure 5G Wi-Fi, choose 5G Basic Network Settings.).

Issue 01 (2024-12-17)

EchoLife HG8145V5 Quick Start for QR code

5 FAQs

What can I do if I cannot connect to the Wi-Fi network?

How to improve the Wi-Fi speed of a Huawei ONT?
1. Wi-Fi speed relies on the bandwidth provided by the ISP, so the simplest way is to upgrade to faster broadband.
2. Wi-Fi speed is affected by the Wi-Fi signal strength and quality.
2.1 Determine the deployment positions of ONT based on house structures,
indoor obstacles, and electrical appliance-caused interferences. If possible, put ONT
in the middle of a planned coverage area and ensure that no obstacles exist and
they are placed at high positions for better coverage. In addition, ensure that the ONT is far away from interference sources such as TVs, refrigerators, cordless phones, and Bluetooth devices.
2.2 Note that load-bearing walls, floors, and metal coated glass may block Wi-Fi signals, avoid or reduce these obstacles between the ONT and Wi-Fi devices (such as pads, mobile phones, and laptops). For outdoor yards, large balconies, and compound rooms, etc., it is recommended to add repeaters to enhance the Wi-Fi coverage.

Issue 01 (2024-12-17)

EchoLife HG8145V5 Quick Start for QR code

5 FAQs

2.3 For common places
where users access the Internet, such as a living room, study room, or master room,
pre-evaluate whether their signal strength is strong enough. If the signal strength is
insufficient(Generally, lower than -72dBm), it is recommended to adjust ONT positions or add new repeaters to enhance the Wi-Fi coverage.
3. Using the correct radio channel. Generally, the Huawei ONT selects channels adaptively. If the network is slow or the quality turns poor from time to time, you can use a WiFi scanner such as WiFi Stumbler or WiFi Analyzer to search for the optimal channel.
4. To prevent unauthorized network access, log in to the web interface of the router and select MAC address filtering based on your requirements.
What can I do if the network speed is slow?
1. Check whether network cables are properly connected. Remove and then insert the network cables. Then, check whether the network speed is normal.
2. Check whether downloading, network video watching, or other operations occupy a large amount of bandwidth. Due to bandwidth restrictions, if some network applications occupy a large amount of network bandwidth, the network speed is slow.
3. Use another PC, mobile phone, or pad to check whether the network speed is normal.
A phone does not ring upon an incoming call but communication is in normal state when the phone is in off-hook state.
The ONT supports a maximum of 60 V AC ringing current voltage. Check whether the ringing current voltage of the phone is higher than 60 V AC. If it is higher than 60 V AC, replace the phone.
How do I restore the Huawei ONT to factory setting?
Press Reset by using a needle-type object for longer than 10s to restore factory defaults and reset the Huawei ONT. If the indicator is off and then is lit, the system restarts successfully.
NOTE
Exercise caution when restoring factory settings. This function may cause the loss of ONT configuration information and further cause an Internet access failure. If this problem occurs, contact your service provider for help.
How can I download Huawei ONT firmware or ONT software?
Huawei ONT is used with an OLT and NMS of a required version. If the versions are not the required ones, the ONT may not work.
If required, contact your internet service provider to obtain the correct ONT firmware or software.

Issue 01 (2024-12-17)

EchoLife HG8145V5 Quick Start for QR code

5 FAQs

Issue 01 (2024-12-17)

Documents / Resources

HUAWEI EchoLife HG8145V5 4ge Plus Tel Gpon Terminal WiFi Router [pdf] User Guide
EchoLife HG8145V5, EchoLife HG8145V5 4ge Plus Tel Gpon Terminal WiFi Router, 4ge Plus Tel Gpon Terminal WiFi Router, Tel Gpon Terminal WiFi Router, Terminal WiFi Router

References

User Manual

HUAWEI EchoLife HG8145V5 4ge Plus Tel Gpon Terminal WiFi Router User Guide

EchoLife HG8145V5 4ge Plus Tel Gpon Terminal WiFi Router

Product Information

Specifications:

Product Usage Instructions

1. Placing the Device:

Mounting an ONT on the desk:

Mounting an ONT onto the wall:

FAQ (Frequently Asked Questions)

Q: Can I install the ONT outdoors?

Q: How much clearance is recommended for ventilation?

Documents / Resources

References

Leave a comment

Cancel reply