TEGERA lOGO879 ESD Gloves Instruction Manual
MORA VMT125X Microwave Oven - icon 1 INSTRUCTIONS FOR USE PRODUCT SPECIFIC INFORMATION ONLY ON THIS PAGE

Synthetic glove, nitrile foam, palm-dipped, foam grip pattern, 18 gg, carbon, nylon, spandex, Cat. II, black, blue, grey, latex-free, silicone-free, for touchscreen, for precision work
EN ISO 21420:2020
TEGERA 879 ESD Gloves - iCON EN 388:2016+A1:2018
4110X
TEGERA 879 ESD Gloves - Icon 1 EN 407:2020 No Flame Protection
X1XXXX
TEGERA 879 ESD Gloves - Icon 2IEC 61340-5-1:2016
R < 1.0 x 10⁹ Ω

TEGERA 879 ESD Gloves - Icon 3 EN 16350:2014
R < 1,0 x 10⁸ Ω

TEGERA 879 ESD GlovesContact heat valid for coated area only, Do not wash

OUTER MATERIAL SPECIFICATION Nitrile
INNER MATERIAL SPECIFICATION Nylon, carbon thread, elastane
SIZE RANGE (EU) 6,7,8,9,10,11,12
EU-TYPE EXAMINATION 2777 Satra Technology Europe Ltd Bracetown Business
Park, Clonee, Dublin 15, Dublin, Ireland
UKCA-TYPE EXAMINATION
0321 SATRA Technology Centre, Wyndham Way, Telford Way, Kettering,
Northamptonshire, NN16 8SD, United Kingdom uk ca icon
MORA VMT125X Microwave Oven - icon 1 INSTRUCTIONS FOR USE – CATEGORY II SEE THE FRONT PAGE FOR PRODUCT-SPECIFIC INFORMATION

Carefully read these instructions before using this product. TEGERA 879 ESD Gloves - Icon 8 DECLARATION OF CONFORMITY www.ejendals.com/conformity
EXPLANATION OF PICTOGRAMS 0 = Below the minimum performance level for the given individual hazard X= Not submitted to the test or test method not suitable for the glove design or material
Warning! This product is designed to provide protection specified in PPE Regulation (EU) 2016/425 and PPE Regulation 2016/425 as amended and brought into UK law with  the detailed levels of performance presented below. However, always remember that no item of PPE can provide full protection and caution must always be taken when exposed to risks.
PROTECTIVE GLOVES AGAINST THERMAL RISKS (HEAT AND/OR FIRE) EN 407:2020

TEGERA 879 ESD Gloves - Icon 1
ABCDEF
A: Limited flame spread
B: Contact heat
C: Convective heat
D: Radiant heat
E: Small splashes of molten metal
F: Large quantities of molten metal
PERFORMANCE (A-F)
Min. 0; Max. 4
EN 388:2016
+A1:2018
TEGERA 879 ESD Gloves - Icon 4
A. Abrasion resistance
B. Blade cut resistance
C. Tear resistance
D. Puncture resistance
E. Cut Resistance TDM (EN ISO13997),
F. Impact Protection
Min. 0; Max. 4
Min. 0; Max. 5
Min. 0; Max. 4
Min. 0; Max. 4
Min. A; Max. F
P=Pass

TEGERA 879 ESD Gloves - Icon 5
IEC 61340-5-1
DERMATEST
Dermatologically tested. This product did not lead to toxic- irritative intolerance reactions in patch testing on humans carried out in accordance with international guidelines.
EN 16350:2014
PROTECTIVE GLOVES – ELECTROSTATIC
PROPERTIESTEGERA 879 ESD Gloves - Icon 3 Warning: EN 16350:2014: The person wearing the electrostatic dissipative protective gloves shall be properly earthed, e.g., by wearing adequate footwear.  electrostatic dissipative protective gloves shall not be unpacked, opened, adjusted, or removed whilst in flammable or explosive atmospheres or while handling flammable or explosive substances. The electrostatic properties of the protective gloves might be adversely affected by aging, wear, contamination, and damage, and might not be sufficient for oxygen-enriched flammable atmospheres where additional assessments are necessary. Test carried out at 25% relative humidity and at test potential, 100 V. Glove specimens taken from the palm.
EN ISO 21420:2020 PROTECTIVE GLOVES – GENERAL REQUIREMENTS AND TEST METHODS Finger dexterity test: Min. 1; Max. 5
FITTING AND SIZING: All sizes comply with the EN ISO 21420:2020 for comfort, fit, and dexterity, if not explained on the front page.
If the short model symbol is shown on the front page, the glove is shorter than a standard glove, in order to enhance the comfort for special purposes – for example, fine assembly work. Only wear the products in a suitable size. Products that are either too loose or too tight will restrict movement and will not provide the optimal level of protection.
STORAGE AND TRANSPORT: Ideally stored in dry and dark condition in the original package, between +10º – +30ºC.
INSPECTION BEFORE USE: Check that the glove does not present holes, cracks, tears, color changes etc. If the product becomes damaged it will NOT provide the  optimal protection and must be disposed of. Never use a damaged product. Wear (or take off) gloves one at a time. Replace gloves regularly for hygienic use
SHELF LIFE: The nature of the materials used in this product means that the life of this product cannot be determined as it will be affected by many factors, such as storage conditions, usage etc.
CARE AND MAINTENANCE: The user bares sole responsibility for submitting the product to mechanical washing after use, as unknown substances can contaminate the  product during use and may affect the performance levels of the product. To care for your product, we recommend that you rinse in cold water and line dry in room temperature.
DISPOSAL: According to local environmental legislation.
ALLERGENS: This product may contain components that may be a potential risk to allergic reactions. Do not use in case of hypersensitivity signs. For more information contact Ejendals.
latex free TEGERA 879 ESD Gloves - Icon 7 YES TEGERA 879 ESD Gloves - Icon 6 NO

BARCO C3010S ClickShare Wireless Presentation Solution - eac ONLY FOR EURASIAN ECONOMIC COMMUNITY CUSTOMS UNION MEMBERS
EJENDALS AB
Limavägen 28, SE-793 32 Leksand, Sweden
Phone +46 (0) 247 360 00 | Fax +46 (0) 247 360 10
[email protected] | [email protected] | www.ejendals.com
Declaration of Conformity www.ejendals.com/conformity

PROBOAT PRB08043 BlackJack 42 Inch Brushless 8S Catamaran - icon 3
TEGERA lOGO 1

Documents / Resources

TEGERA TEGERA 879 ESD Gloves [pdf] Instruction Manual
TEGERA 879, ESD Gloves, TEGERA 879 ESD Gloves, Gloves

References

Leave a comment

Your email address will not be published. Required fields are marked *