TECTINTER G6 Wireless Controller User Manual

G6 Wireless Controller
User ManualSchematic diagram of functional buttons:

Applicable instructions:

1. This product adopts ergonomic design, providing a comfortable hand feel.
2. Using Bluetooth 5.3 EDR/BLE connection, the controller is connected to various hosts such as mobile phones through Bluetooth.
3. Support Shooting Plus APP, which can be downloaded from various mobile app markets.
4. Supports Android and HarmonyOS HID standard modes, and can play various arcade games that support HID standard modes.
5. Supports Android 6.0 and above systems (i.e. ShootingPlus Android mode).
6. Supports iOS 13.0 and above MFi games, which can be downloaded from the ShanWan MFi app.
7. Support playing X-input games on Android/Apple/HarmonyOS phones.
8. Equipped with six axis motion sensing function, supporting strong motion sensing opening
   ★ Due to system issues with the mobile phone, some phones may not support this device
   ★ Due to uncontrollable factors such as official game platform software upgrades or source code changes, some games may not be able to connect and operate with this product. Our company is not responsible for any consequences. Our company reserves the right of final interpretation regarding this matter.

Product characteristic parameters:

1. Working voltage: DC3.7V
2. Working current: approximately 10mA
3. Continuous usage time:>20H
4. Sleep current:<5uA
5. Charging voltage/current: DC5V/500mA
6. Bluetooth transmission distance:<=8M
7. Battery capacity: 400mAh
8. Standby time: 60 days of fully charged storage

Product Instructions:

Pull the controller mode to X-input, long press the HOME button for 3 seconds, and the indicator light (cyan) will flash. Use the device to find and add a Bluetooth device, click search, and when you find the device name “Xbox Wireless Controller”, select connect. After successful connection, the indicator light on the handle remains on (cyan).
Successfully connected, you can directly press 【HOME】, the indicator light will flash slowly, and it will automatically reconnect.
* This mode is suitable for streaming on Android/iOS/HarmonyOS/Xbox console series and PC consoles, as well as playing original games on mobile phones
2.4G mode:Pull the controller mode to 2.4G, press and hold the HOME button for 3 seconds to enter 2.4G mode, the controller indicator light (cyan) flashes rapidly, and the receiver is plugged into the device. After successful connection, the indicator light on the handle remains on (cyan).
Successfully connected, you can directly press 【HOME】, the indicator light will
flash slowly, and it will automatically reconnect.
* This mode is suitable for PC and Android devices
Switch mode:On the SWITCH host, select Controller
->Change Grip/Order to enter the SWITCH host pairing mode interface Press L+R on the controller. Next, turn the controller mode to Switch and enter Switch mode pairing. Press and hold the HOME button for 3 seconds, and the indicator light [green] will flash. After successful connection, the controller indicator light will remain on [green].
Successfully connected, you can directly press 【HOME】, the indicator light will
flash slowly, and it will automatically reconnect.
* This mode is suitable for Switch consoles.
MFi mode:Pull the controller mode to MFi, press and hold the HOME button for 3 seconds, and the indicator light (purple) will flash. When the device searches for the device name “DUALSHOCK 4 Wireless Controller”, select Connect. After successful connection, the indicator light on the handle remains on (purple).
Successfully connected, you can directly press 【HOME】, the indicator light will flash slowly, and it will automatically reconnect.
* This mode is suitable for playing native Apple/Android/HarmonyOS games, as well as streaming games on PS4/PS5
V3 mode :Pull the joystick mode to V3, press and hold the HOME button for 3 seconds, the indicator light (red) will flash, turn on the phone’s Bluetooth, find the Bluetooth name “G6”, select the connection, and after successful connection, the joystick indicator light will remain on (red).
Successfully connected, you can directly press 【HOME】, the indicator light will flash slowly, and it will automatically reconnect.
* This mode only supports games that require mapping on Android and HarmonyOS systems, such as King of Glory and PUBG!
* When the handle is pulled to the V3 position, hold down X first and then press HOME to turn on the device, which is in HID mode. And it must be connected in this way every time.
Android/HarmonyOS key mapping function:
Follow the official account “ShootingPlus” and check the default operating instructions in the official account. If you need to set the mapping keys, please download and install the “Shooting PlusV3” APP, map the keys and adjust the key positions in the APP.
The Shooting Plus V3 App can be downloaded from various mobile app markets for Android and HarmonyOS systems.

https://qixiongfiles.cn/app/V5Download.html

Wired mode:

1. Supports wired connections for Android HID, Switch, MFI, and Xinput
2. The usage method is to unplug to the desired mode, and then connect the device and handle with a cable with data transmission function!

Motor vibration intensity adjustment:

Pressing and holding the TURBO+right joystick up and down can enhance and reduce the vibration of the motor

TURBO settings:

Press “A” and then “T” to press the “A” key Turbo for continuous firing Press “A” for the second time and then press “T”, the “A” key will automatically send consecutive messages Press “A” for the third time and then press “T” to turn off the continuous transmission (restore the original state)
with the “A” key
When the “A” key is in AUTO automatic continuous firing mode, hold down the “TURBO+left joystick up and down” button to set the speed of automatic continuous firing, which is 15 strokes per second, 25 strokes per second, and 8 strokes per second. (Note: The method for setting other function keys is the same as above)

Axis calibration function:

Place the controller flat on the desktop, while holding down the 【START+HOME】 button, wait for the indicator light to stay on, then release it.
After calibration is complete, the indicator light will turn off.

Strong physical sensation:

1. Press and hold the “T” key for eight seconds, and if the motor vibrates, switch to simulating the right joystick.
2. When the six axis has been switched to the right joystick, lightly press “T” to enter the gyroscope half on state. The main usage scenario is to assist shooting and aiming when pressing L2 to turn on the mirror during FPS games.
3.  Press and hold the “T” key again for eight seconds without releasing it. If the motor vibrates, switch to simulating the left joystick.
4. Press and hold the “T” key again for eight seconds without releasing it. If the motor vibrates, cancel.

Macro programming:

【Back macro extension settings】
Press and hold the “SELECT” button on the controller, then press “M1”. After 1 second, the indicator light will flash rapidly. This is the setting mode [M2 setting method is the same as above]
After the setting mode is turned on, the indicator light will flash rapidly. At this time, the buttons can be set, and the key pressed on the controller will be recorded on the M1 button. For example, press the A key once, and A will be entered into M1.
[This key is for listing: other keys can also be entered]
To set multiple buttons: press A once, then press B, then press X, and then press Y, so that the order of M1’s moves is A, B, X, and Y. [This button is set to list: 12 ABXY/up, down, left, right/L/ZL/R/ZR can be set for other move orders]
After pressing the button, press M1 again to complete the programming, and the indicator light will remain on.
【Back macro clear button】
Simultaneously press and hold the “SELECT” and “M1” keys on the controller to enter programming mode. The indicator light will flash. Do not enter any key values at this time. Press the “M1” key again to eliminate the key values set before the M1 key.

Controller charging/sleep/wake-up function:

1. Controller charging function:
   When the power is low, the indicator light flashes to prompt;
   When charging, the indicator light flashes slowly to prompt;
   When fully charged, the controller shuts down;
2. Controller sleep/wake-up/shutdown function:
   A. The controller automatically shuts down and enters sleep mode within 5 minutes without any button operation;
   B. When it needs to be reused, press the HOME key to wake up and reconnect;
   C. In the power on state, long press the HOME button for 8 seconds to turn off the product and all LED indicator lights will turn off.

Warning:

1. It is prohibited to use the controller in high-temperature (>45), humid and dusty environments to prevent short circuit and corrosion of internal components.
2. Do not drop or impact the controller to avoid shell damage, button failure or vibration motor damage.
3. When connecting the device, do not connect to non-standard voltage devices to prevent the controller from being burned out.
4. Minors should use it under the guidance of guardians to avoid fatigue caused by long-term gaming and reasonably control the use time.