TECKNET TK-GK005 Keyboard Driver Software

Product Information

Specifications:

• Model: TK-GK005
• Download Driver Software from: https://tecknet.com

Product Usage Instructions

System Compatibility Verification

1. Search for TK-GK005, then download the software and driver manual using the arrow icons.
2. Follow on-screen instructions to complete installation. Double-click the software icon to launch it.

Driver Usage Guide

Key Editing Steps to Modify Key Functions:

• Select a profile
• Choose “Standard” or “Fn Mode”
• Click the target key (e.g., A key)
• Select a function type from the left panel
• Configure settings
• Click “OK”.

Lighting Customization

Select a profile before adjusting lighting effects.

• 27 effects: Static, Breathing, Wave, Starlight, Reactive, etc.(Some require the driver to run, indicated by the icon on the upper right corner of the lighting mode).

Driver Installation & Initialization

1. System Compatibility Verification
   • Supported OS: Windows 10/11 (64-bit)
   • Hardware Requirements: USB 2.0 or above interface, at least 200MB storage space
   • Connection Modes: USB Wired Mode, USB Receiver Mode (BT Mode is not supported for driver functionality)
2. Driver Download & Installation
   Steps to Follow:
   1. Visit the official website: https://tecknet.com.
   2. Scroll to the bottom and find 【Support】 → click 【Product Drivers & Manuals】.
   3. Search for TK-GK005, then download the software and driver manual using the arrow icons.
   4. Follow on-screen instructions to complete installation. Double-click the software icon to launch it.

Driver Usage Guide

Homepage

• Status Check: Displays the current keyboard connection mode and remaining battery level.
• Profile Switching: Select preset profile from the dropdown menu.
• Sleep Settings: Adjust the sleep duration in minutes using the slider at the bottom.

Language Settings & Firmware Maintenance

• Language Switch: Click Settings icon 【】 → 【General】 → 【Language】, then select the target language.
• General Settings: Set close action (minimize/exit) and theme color under 【General】.
• Factory Reset: Navigate to 【Reset & Update】 → Click 【Reset】 → Confirm by clicking 【OK】 in the pop-up window.
• Firmware Update:
  1. Connect the keyboard via USB Wired Mode.
  2. Go to 【Reset & Update】 → Click 【Update】 to complete the version upgrade.

Profile Configuration

• Purpose:
  Profiles save the keyboard’s complete settings for quick switching (e.g., “Gaming Mode”, “Office Mode”) and backup customization to prevent data loss.
• Creating a Profile:
  1. Click 【Key Function Setting】 → Under 【Profiles】, click 【Add】.
  2. Right-click the new profile → 【Rename】 → Enter a name (e.g., “Office Mode”) → Click 【OK】.
• Switching Profiles:
  1. Global Switch: Select a target profile from the dropdown list on the software homepage.
  2. Shortcut Binding: Assign the 【Switch Profile】 function to a key (e.g., Alt key).
• Editing Profiles:
  1. Select the target profile to modify key functions, RGB effects, etc. (Changes auto-save).
  2. Each profile stores parameters independently (editing Profile A won’t affect Profile B).
• Advanced Features:
  Right-click a profile to:
• Import/Export profiles across devices.
• Link Game or App: Automatically switch to the assigned profile when opening linked game/app.

Key Editing

Steps to Modify Key Functions:
Select a profile → Choose 【Standard】 or 【Fn Mode】 → Click the target key (e.g., A key) → Select a function type from the left panel → Configure settings → Click 【OK】.

Mode Selection:

• Standard Mode: Modify single-key outputs (letters, commands, etc.).
• Fn Mode: Customize Fn + Key shortcuts (e.g., Fn + L switches lighting modes) – original key functions remain unchanged.

Supported Function Types:

• Default: Restore factory settings (e.g., A key inputs “A”).
• Keyboard/Mouse Functions: Remap keys to other keyboard keys, mouse buttons, or operational functions (e.g., remap A to S, Ctrl+C shortcut, or mouse right-click/scroll wheel actions) through selection or macro recording.
• Macro: Bind pre-recorded macros (automated scripts consisting of a series of keyboard/mouse actions).
  Refer to the Macro Function Guide section below for details.
• Switch Lighting: Quick toggle RGB Lighting modes.
• Switch Profile: Assign a key to switch profiles.
• Multimedia: Control media playback, volume, screen brightness, etc.
• Windows Shortcut: Assign system-level shortcut functions to a single key (e.g., editing commands like Copy/Paste, or window management functions like Alt+Tab or Close Window).
• Disable: Deactivate a key.
• Fn Key: Assign the Fn role to a key.
• Launch Program/URL: Bind a key to quickly launch specified program or open designated URL (e.g.,press A to open Google Chrome). For URLs, omit “https://” and enter starting with “www” (e.g., www.google.com).
• Text Function: Automatically input predefined text templates (e.g., email, address, password template,text content) when pressing the key. Requires preset templates in 【Text Template Manager】.
• Cursor Position: Move the cursor to a designated screen position when pressing the key. Positions can be set by either clicking target coordinates or manually entering X/Y values.

Key Modes:

• Custom: The keyboard automatically switches to 【Custom】 mode when keys are edited.
• Default: Select 【Default】 to restore factory presets.
  Use case: Quickly reset all keys (e.g., after misconfiguration) or toggle between default/custom layouts.

Lighting Customization
Select a profile before adjusting lighting effects.

• Basic Lighting Modes:
  • 27 effects: Static, Breathing, Wave, Starlight, Reactive, etc. (Some require the driver to run, indicated by the icon on the upper right corner of the lighting mode ).
  • Brightness: Adjust lighting brightness via slider (1–100).
  • Speed: Control dynamic effect tempo via slider (Slow/Normal/Fast).
• Custom Colors:
  • In supported lighting modes (e.g., Static, Breathing, Starlight), use the color palette to select custom colors.
  • Preview changes in the driver or on the keyboard.
• Audio Visualizer Mode:
  • Effects: Lights dynamically respond to system audio (frequency changes & beats)
  • Setup: Select 【Audio Visualizer】 Mode → Authorize driver access to system audio output/microphone (*auto-activates on some devices*).
  • Note: This mode may increase CPU load. If experiencing lag, try closing background applications.

Macro Function Guide

1. Create a Macro:
   Go to 【Macro Manager】 → Click 【 + 】 → Name the macro (e.g., “Combo A”) → Click 【OK】.
2. Record a Macro:
   Click 【Start Recording】 → Perform actions → Click 【Stop Recording】.
   Delay Options:
   【Record Delay】: Preserves original timing between actions (exactly replicates your manual operation rhythm).
   【Fixed Delay】: Applies consistent intervals between all actions (e.g., 10ms).
   【Random Delay】: Generates intervals randomly within a set range.
3. Insert Events:
   After recording, manually insert:
   【Keyboard Event】: Press & release a specific key (e.g., Ctrl).
   【Mouse Event】: Left/Right clicks, scroll up/down, forward/backward button clicks, etc.
   【Cursor Position】: Jump to a coordinate (e.g., X: 800, Y: 300).
   【Delay】: Insert fixed or randomized intervals.
   Steps:
   Select insert position on timeline → Choose 【Insert Before This】/【Insert After This】 → Select event type and configure → Click 【Insert】
4. Edit Macro Events:
   • Reorder Events
     Drag & drop event blocks in the timeline, or use the 【】/【】 arrows to adjust execution order.
   • Modify Delays
     Double-click delay values between events to edit timing.
   • Copy/Delete Events
     Select an event block → Click 【】/【】
   • Reload
     Click 【】 to restore original recorded events (pre-editing state).
   • Clear All Items
     Click 【】 to empty the timeline.
   • Undo/Redo
     Click 【】/【】 to revert/reapply actions.
     Rename/Delete Macro
     Click 【】 to rename or delete macros.
     Import/Export Macro
   • Export: Open 【Macro Manager】 → Select macro → Click 【】 → Choose location → Click 【Save】.
   • Import: Open 【Macro Manager】 → Click 【】 → Select file → Click 【Open】.
5. Apply Macro:

Bind Macro to Key
Click 【】 → Select target key (e.g., Z) → Click 【Macro】 → Select macro from dropdown list → Set loop mode → Click 【Save】 → Test key

Loop Options

• Playback Count: Set fixed repeats (e.g., 5 loops).
• 【Play while this key is pressed】: Loops while key is pressed, stops on release.
• 【Toggle continue playback on/off using this key】: Start/stop loop with same key press.
• 【Step play while this key is pressed】: Executes one event block per key press.

Text Function Guide

1. Create Text TemplateClick 【】 and enter 【Text Template Manager】 → Click 【 + 】 → Enter Template Name (e.g., “Greeting”) → Type text (e.g., “Hello”) + add emojis/symbols → Click 【Save】.
   【Send】Option:
   Enabled: Auto-sends text on key press without pressing Enter.
   Disabled: Inputs text only on key press (requires Enter to send).
2. Assign to Key

Go to 【Key Function Setting】interface → Select a key (e.g., Z) → Choose 【Text Function】 → Pick template from dropdown list → Click 【Save】 → Test the key.

Frequently Asked Questions

Q: Where can I download the driver software for TK-GK005?
A: You can download the driver software from https://tecknet.com.

Q: How can I customize the lighting effects on the keyboard?
A: To customize lighting effects, select a profile before adjusting and choose from the available 27 effects such as Static,Breathing, Wave, Starlight, Reactive, etc.

Documents / Resources

TECKNET TK-GK005 Keyboard Driver Software [pdf] User Guide EGK01005, TK-GK005, TK-GK005 Keyboard Driver Software, Keyboard Driver Software, Driver Software, Software

References

• User Manual