TCL HH515V 5G Home Station Router
Product Information
The TCL CJB1YM001AAB is a wireless router that supports both 4G and 5G networks. It has indicators for power, Wi-Fi/WPS, 4G and 5G networks. The router comes with WAN/LAN ports, LAN ports, a telephone port, a power connector, a micro USB port, a nano SIM card slot, and a reset button. It also has a WPS button that can be used to enable the WPS function.
Product Usage Instructions
To use the TCL CJB1YM001AAB wireless router, follow these instructions:
- Connect the power adapter to the power connector and plug it into an electrical outlet.
- Insert a nano SIM card into the nano SIM card slot located at the bottom of the device. Do not remove the SIM card when the router is in use.
- Press the power button to turn on the device. The power indicator will light up.
- Connect your computer or other wired devices to the WAN/LAN port or LAN ports using an Ethernet cable.
- Use the telephone port to connect a telephone to make or answer calls.
- To enable the WPS function, press the WPS button for 3 seconds. The WPS function will be automatically disabled if a WPS connection is not established within 2 minutes.
- If you need to reset the device, use a paperclip to press and hold the reset button for 3 seconds.
Note: The micro USB port is intended for debug use only and should not be used for normal operation.
OVERVIEW
| 1. 5G network indicator | • Solid blue: the signal is strong. • Solid yellow: the signal is good. • Solid red: the signal is weak. • Off: the 5G network is not working. |
| 2. 4G network indicator | • Solid blue: the signal is strong. • Solid yellow: the signal is good. • Solid red: the signal is weak. • Off: the 4G network is not working. |
| 3. Wi-Fi/WPS indicator | • Blinking blue: WPS connection is available. • Solid blue: Wi-Fi is enabled. • Off: Wi-Fi is disabled. |
| 4. Power indicator | • Solid blue: the device is on. • Blinking blue: the device is performing factory reset or firmware update. • Off: the device is off. |
| 5. Power button | • Press for 3 seconds to power off your device. • Press for 1 second to power on your device. |
| 6. WPS button | Press the button for 3 seconds to enable the WPS function. The WPS function will be automatically disabled if a WPS connection is not established within 2 minutes. |
| 7. WAN/LAN port | Used to connect to an internet source or wired devices such as computers or switches. |
| 8. LAN port | Used to connect to wired devices such as computers or switches. |
| 9. Telephone port | Connect a telephone to make or answer calls. |
| 10. Power connector | Used to connect to the power adapter. |
| 1. Micro USB port | It is intended for debug use only. |
| 2. Nano SIM card slot | Insert a nano SIM card in the slot. |
| 3. Reset button | Use a paperclip to press the button for 3 seconds to reset the device. |
INSERT SIM CARD
NOTE: Do not remove the SIM card when your CPE is in use.
CONNECTIVITY
- To establish a wired network connection, connect the wired device to the LAN port of your CPE using an Ethernet cable.
- To establish a wireless network connection, search for the Wi-Fi name on your wireless devices. The default Wi-Fi name (or the SSID) and password can be found on the bottom label of your CPE.
- To configure the CPE Wi-Fi network, open a web browser on the device connected to the CPE network wiredly or wirelessly, then go to http://192.168.1.1 and follow the on-screen instructions.
NOTE: For the default login information, refer to the bottom label of your CPE.
Documents / Resources
 | TCL HH515V 5G Home Station Router [pdf] User Guide HH515V 5G Home Station Router, HH515V, 5G Home Station Router, Home Station Router, Station Router, Router |
