TAKSTAR - logoCS-200 Speakerphone
User Manual

TAKSTAR CS-200 SpeakerphoneTAKSTAR CS-200 Speakerphone


Dear Customer,
Thank you for purchasing Takstar CS-200 Speakerphone. In order to better understand and use the product, please read this manual carefully before use.
If you have any questions or suggestions, please contact our local dealer.


  • Omni-directional speakerphone designed for remote conference/ learning/training.
  • Full-duplex microphone & speaker combo, record, and playback simultaneously.
  • 4 microphone arrays, 360° coverage, up to 5m vocal pickup range.
  • Automatic vocal location detects and focuses on the speaker.
  • Coupled with an intelligent algorithm for automatic echo cancellation for clear sound.
  • Compatible with various audio/video communication software connects via Wireless or USB mode.
  • Easy touch control prevents mechanical noise from the conventional switch.
  • Portable, driverless, plug and play anytime, anywhere for remote office needs.
  • Powerful lithium-ion battery inside lasts for around 10hrs of use.

Package Contents

Speakerphone ………………………………………….1pc
Carrying Case…………………………………………. 1pc
Data Cable…………………………………………….. 1pc
User Manual…………………………………………… 1pc


Video conference, distance education, remote training.


  • Speaker Output Power: 3W
  • Speaker Frequency Response: 20Hz-20KHz
  • Number of Mic: 4 microphone arrays
  • Mic Polar Pattern: Omni-directional (360° pickup)
  • Mic Frequency Response: 50Hz-16kHz
  • Mic Sensitivity: -26dB
  • Mic Distortion: ≤1% at 1KHz
  • Connection: USB2.0/Wireless
  • Sample Rate: 96kHz
  • Bit Rate: 26bit
  • Wireless Range: 10m
  • Duplex Audio: supported
  • Echo Cancellation: supported
  • Mic Array Noise Cancellation: supported
  • Vocal Location: supported
  • Power Supply: 3.7V/2600mAh Li-ion battery
  • Charging Spec: 5V/1A
  • Charging Time: approx. 3hrs
  • Battery Life: approx. 10hrs

Note: The above data is measured by Takstar laboratory, and Takstar has the final interpretation right

Function Descriptions

TAKSTAR CS-200 Speakerphone - Function Descriptions

  1. Power Switch: press and hold for 1s to power on/off; when powered on, tap to display current battery level.
  2. Ring Indicator: displays volume/ battery level/ mute status/ pickup direction, based on device work status.
  3. Volume Up “+”: tap to increase volume, or press and hold to increase rapidly.
  4. Volume Down “−”: tap to decrease volume, or press and hold to
  5. Mute Button: tap to enable/disable the microphone.
  6. Mode Button: tap to switch between Wireless mode or USB mode. Under Wireless mode, press and hold for 2s to enter device pairing mode. Press and hold for 5s to reset the Wireless function and clear all pair data.
  7. Status Indicator: blue under Wireless mode, or white under USB mode.
  8. Answer Call Button: tap to answer/end call; press and hold to reject an incoming call.
  9. Data Port connects to a computer for data transfer and power supply, or connects to a charger with output power ≥ DC 5V 1A. (the charger must have compatible 5V output.)
  10. Charging Indicator: red while charging, green when fully charged.

Operation Instructions

  1. PC/MAC
    Connect the speakerphone to the computer USB socket using a USB cable, (speakerphone will auto charge), USB data transfer will start once the computer automatically recognizes the device and completes driver installation, in which case the status indicator will light up in solid white.
    TAKSTAR CS-200 Speakerphone - sound settings 2
  2. PC: set TAKSTAR CS-200 as the default device for both Playback and Recording in your system sound settings.
    TAKSTAR CS-200 Speakerphone - sound settingsmacOS: select TAKSTAR CS-200 in both Input and Output tabs under System Preferences – Sound.
    TAKSTAR CS-200 Speakerphone - sound settings 3
  3. Open your videoconference or instant communication software to start network conversations.


  1. Upon first use of Wireless mode, the status indicator flashes blue while searching device to pair.
  2. Search device to pair in your smartphone/tablet Settings, wait until “TAKSTAR CS-200” is discovered, then tap on it to connect. Once connected successfully, the indicator will light up blue.
  3. Open your videoconference or instant communication software to start network conversations.
    Note: The speakerphone will automatically reconnect to a previously paired device.
    Press and hold Mode Button for 2s to enter pairing mode.

Safety Instructions

To avoid electric shock, overheat, fire, radiation, explosion, mechanical risk, and injury or property loss due to improper use, please read and observe the following items before use:

  1. Please check if the power of the connected equipment matches that of this product before operation. Adjust the volume to the proper level during operation. Do not operate at over-power or high-volume level for an extended time to avoid product malfunction or hearing impairment.
  2. If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch and unplug from the power source, then send the product to the local dealer for repair.
  3. Keep this product and its accessories in a dry and ventilated area. Do not store in a humid or dusty area for an extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing, vibrating, or blocking any ventilation openings, to prevent malfunction.
  4. The product must, when installed on walls or ceilings, be fixed firmly in place at adequate strength to prevent from falling.
  5. Please abide by safety rules during operation. Do not use the product in places prohibited by laws or regulations to avoid accidents.
  6. Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local dealer.
  7. The battery must not be exposed to sunlight, fire, or other overheating environments.
  8. There is a danger of explosion if the battery is replaced incorrectly. Only the same or equivalent type of battery can be used for replacement.
  9. The product is sold without a power adapter. If you use a power adapter to supply power, you should purchase and use a power adapter that has obtained CCC certification and meets the standard requirements.

Label Meanings

TAKSTAR CS-200 Speakerphone - ccc iconThis icon indicates that the product meets the 3C certification requirements of China Compulsory “ Product Certification”.

TAKSTAR CS-200 Speakerphone - ce iconAccording to the test results obtained based on RL2004 /108/EG (Electromagnetic Compatibility Directive) and RL2006/95/EG (Low Voltage Directive), this product implies with the limits specified in the European Community EMC (Electromagnetic Compatibility) Directive, integration of relevant laws from its member states.

TAKSTAR CS-200 Speakerphone - fc iconNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

TAKSTAR CS-200 Speakerphone - disposal iconThis symbol indicates that, according to the WEEE (Waste of Electrical and Electronic Equipment) Directive (2012/19/EU) and national laws, this type of waste should not be discarded along with your household waste, as it contains potentially hazardous substances that may pose a negative impact on the environment and human health. It should be handed over to an authorized WEEE collection facility for recovery and recycling. By doing so, you will be helping the effective utilization of natural resources. For more information on the disposal of WEEE products, please contact your local municipal office, waste management bureau or household waste disposal service.

About This Manual

This manual contains up-to-date technical specifications as of printing.
However, this manual may not contain specifications conforming to your particular product since Takstar is constantly improving its products. For the latest version/more information, please visit our website: https://www.takstar.com/. Specifications, devices or accessories available may vary from region to region. If you have any questions, please contact our local dealer.

Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Kang YiRd., Longxi Boluo
Huizhou, Guangdong 516121 China
Tel: 86 752 6383644 Fax: 86 752 6383952 Email: [email protected]
Website: www.takstar.com
CMIIT ID:xxxxxxxxxx

Documents / Resources

TAKSTAR CS-200 Speakerphone [pdf] User Manual
CS-200, CS200, WRACS-200, WRACS200, CS-200 Speakerphone, Speakerphone

Leave a comment

Your email address will not be published.