Learn how to use the BMS-IMS Freeze Sensor Connection Kit (IS-F-FZSensor-BMS/IMS) with the FEBCO system. This user manual provides information on kit components, requirements, and how the freeze sensor operates. Take preventive action and avoid equipment damage with this smart and connected sensor technology.
Learn how to install the 009-FS Series BMS Sensor Connection Kit with these step-by-step instructions. This kit comes with everything needed for new or existing valve installations and includes deflectors marked by size for easy installation. Ensure proper flood sensor activation and compliance with local building codes.
The Terminator ZP-PTD100-WP Temperature Sensor Connection Kit user manual provides installation procedures and kit contents for this product. The kit includes PTD-100 temperature sensor(s) and complies with EN IEC 60079-14 regulations for hazardous areas. Ground-fault protection is required due to the risk of electrical shock, arcing, and fire caused by improper usage.
Learn about the WATTS 957-FS BMS Sensor Connection Kit through its user manual. This kit enables flood detection and real-time notifications via a building management system. Ensure safety by reading this manual before use.
This instruction manual is for the LF909-FS Cellular Sensor Connection Kit and Retrofit Connection Kit. It includes all necessary safety and use information for installation and maintenance. The kit integrates a flood sensor to detect potential flood conditions in real-time, with notification through the Syncta SM app. Upgrade existing installations with the Retrofit Connection Kit. Consult local building and plumbing codes prior to installation.
This user manual provides detailed instructions for installing and using the RW 403-SK Remote Sensor Connection Kit, designed to simplify the weighing process for commercial vehicles. It also includes important information on warranty, liability, and compliance requirements. Contact technical support for further assistance.
Discover the WATTS LF909-FS Cellular Sensor Connection Kit with smart and connected technology for flood protection. Upgrade existing installations with the LF909-FS Retrofit Connection Kit and activate the flood sensor for real-time notifications through SynctaSM app. Read the manual for safety instructions and installation guidelines.
