RemotePro Manuals & User Guides

REMOTEPRO C2x29750442 King Gates Wireless Keypad Instructions

December 3, 2024

REMOTEPRO C2x29750442 King Gates Wireless Keypad Specifications Product: King Gates Wireless Keypad Number of Opening Codes: Up to 3 Default Codes: 3 factory default codes (one for each letter) Security: Personal security code programming available Battery: Coin/button cell battery Pair…

Brand: RemotePro

RemotePro RPC303-004 Liftmaster Garage Remote Instructions

July 3, 2022

Liftmaster Instructions Program the Receiver to Match Additional Remote Control Codes Using the orange “LEARN” button. Press and release the orange “LEARN” button on the motor. The learn indicator light will glow steadily for 30 seconds. Within 30 seconds, press…

Brand: RemotePro

remotepro M802 Garage Remote Programming Instructions

June 9, 2022

M802 Garage Remote Programming Instructions Coding Instructions Open the original working remote (which may be located under the battery cover or you may need to remove the screws at the back of the remote). Please note: If you do not…

Brand: RemotePro

RemotePro Remote Power System User Guide

December 3, 2021

RPS/RPL 12/24 PWM RemotePro® Remote Power System Wireless Base Stations and Client Devices Surveillance Cameras Remote Sensors Remote Lighting Off-Grid Electronics Congratulations! on your purchase of the RemotePro™ off-grid remote power system. Please take a moment to review this wiki…

Brand: RemotePro

motepro Installing Receiver to Dominator ADS Instructions

November 24, 2021

motepro Installing Receiver to Dominator ADS Instructions Installing Receiver to Dominator ADS TURN OFF POWER FROM THE POWER POINT View the diagram below and ensure that it matches with the back of your motor. Loosen each of the three screws,…

Brand: motepro

RemotePro Installing Receiver to Aussie Opener Garage Door Motor Installation Guide

November 24, 2021

RemotePro Installing Receiver to Aussie Opener Garage Door Motor 1. TURN OFF POWER OF MOTOR FROM THE POWER POINT 2. View the diagram below and ensure that it matches with the back of your motor. 3. Connect the black receiver…

Brand: RemotePro

RemotePro Coding HT3 Remote to Motor Instructions

November 24, 2021

RemotePro Coding HT3 Remote to Motor Remove the face plate of the motor to locate the radio set button. The radio set button is generally yellow but the colour may vary depending on your motor model. Press the radio set…

Brand: RemotePro

RemotePro Duplicate Coding Instructions

November 24, 2021

RemotePro Duplicate Coding Instructions Step 1: Erasing Factory Code Press and hold the top two buttons at the same time and do not let go (these will either be an unlock/lock symbol, numbers 1&2 or an up and down arrow).…

Brand: RemotePro

RemotePro Explorer Instructions

November 24, 2021

RemotePro Explorer Sit in the car with doors closed. Insert the key into the ignition. In less than 10 seconds, turn the key from the off position to on position 8 times. The key must end in the on position.…

Brand: RemotePro

RemotePro FAAC Instructions

November 24, 2021

RemotePro FAAC Open your motor/control panel which will either be located on the gate motor or will be inside of a box mounted to the wall close to the motor. Once the cover has been removed, please locate the receiver…

Brand: RemotePro

Digi-Code and Multi-Code Remote Programming Instructions | RemotePro

Instruction Guide • October 30, 2025

Learn how to code Digi-Code and Multi-Code remotes for your motor system. This guide provides step-by-step instructions and important safety warnings.

Brand: RemotePro

WIFI RECEIVER - Smart Garage Door Opener with eWeLink App Control

Product Overview • September 23, 2025

User guide for the WIFI RECEIVER, detailing its use in access control, intercom, and garage door systems. Learn how to connect and operate the device via the eWeLink mobile app. Includes technical specifications, installation instructions, extended functions, and precautions.

Brand: Remotepro

Remote Coding Instructions and Battery Safety

instruction • September 21, 2025

Step-by-step guide for coding remotes and important safety warnings regarding battery handling.

Brand: RemotePro