Module Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Module products.

Tip: include the full model number printed on your Module label for the best match.

Module manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

INTAP ZBELT-09CAN Base Module User Manual

March 9, 2023

INTAP ZBELT-09CAN Base Module General information The ZBELT-09 system is designed to signal the lack of fastening of seat belts in special vehicles not equipped with such a system at the factory. A characteristic feature of the system is wireless…

Brand: INTAP

MSD PN 7566-1 Channel Relay Module Instruction Manual

March 9, 2023

PN 7566-1 Channel Relay Module Instruction Manual PN 7566-1 Channel Relay Module Single, Two, & Four Channel Relays PN 7566-1, PN 7566-2, PN 7566-4 ONLINE PRODUCT REGISTRATION: Register your MSD product online. Registering your product will help if there is…

Brand: MSD

Honeywell 5880 IO-LED Driver Module Owner’s Manual

March 8, 2023

Honeywell 5880 IO-LED Driver Module The 5880 IO / LED Driver module provides an effective means to customize your remote annunciation. A single 5880 provides 40 programmable LED outputs and eight supervised dry contact inputs. You can use up to eight…

Brand: Honeywell

Honeywell SD500-ANM Addressable Notification Module Owner’s Manual

March 8, 2023

Honeywell SD500-ANM Addressable Notification Module Addressable Notification Module The SD500-ANM gives you the flexibility to add notification circuits wherever you need them. The SD500-ANM is a supervised addressable notification device that provides you with additional notification circuits on the control…

Brand: Honeywell

Honeywell 7800 Series Relay Module User Guide

March 8, 2023

7800 Series Relay Module User Guide GENERAL The Yamatake Honeywell EC7895A and RM7895 is a microprocessor based integrated burner control for automatically fired gas, oil, or combination fuel single burner applications. The RM7895 consists of the Relay Module. Subbase, Amplifier…

Brand: Honeywell

Honeywell RM7800 Series Relay Module Instruction Manual

March 8, 2023

Honeywell RM7800 Series Relay Module APPLICATION The Honeywell RM7800/RM7840 Relay Modules are microprocessor-based integrated burner controls for automatically fired gas, oil, or combination fuel single burner applications. The RM7800/RM7840 Relay Modules are used for UL/CSA On/Off, UL/CSA Modulating, and FM/IRI…

Brand: Honeywell

Honeywell 5824 Serial Parallel Gateway Module Instructions

March 8, 2023

Honeywell 5824 Serial Parallel Gateway Module Adds one parallel, one RS-232 port and Gateway protocol to the Farenhyt Fire Alarm Control Panel Serial/Parallel Gateway Module With one parallel and one RS-232 serial port, the 5824 Serial/Parallel Interface allows you to…

Brand: Honeywell

Honeywell SD500-LED LED Driver Module Instructions

March 8, 2023

SD500-LED LED Driver Module The SD500-LED is a LED driver module capable of driving 80 LEDs which connect to the SLC loop on a Silent Knight addressable control panel. Up to 40 SD500-LED modules can be used per SLC loop…

Brand: Honeywell

Honeywell SD500-SDM Two-Wire Smoke Module Instructions

March 8, 2023

SD500-SDM Two-Wire Smoke Module Instructions Converts a conventional smoke loop to an SLC loop. SD500-SDM Two-Wire Smoke Module SSDD550000--SSDDMM Two--Wire Smoke Module The SD500-SDM allows you to assign an address to a loop of conventional detection devices. These devices can…

Brand: Honeywell

AMETEK ATMi Series Intrinsically Safe Advanced Temperature Module User Manual

March 8, 2023

AMETEK ATMi Series Intrinsically Safe Advanced Temperature Module Overview INTRODUCTION The Crystal ATMi series of intrinsically safe temperature modules allow you to add temperature measurement capability to your HPCS0 pressure calibrator. The ATMi uses the same reliable, high accuracy, digital…

Brand: AMETEK